Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are durable, long-lasting and easy to maintain. They don't get rotten or rusty like aluminum and timber.

It is important to clean and oil UPVC doors and windows regularly. This will prevent unnecessary repair costs and Upvc window Repairs increase energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a huge deal of damage to your home, making it extremely dangerous and upvc window Repairs possibly fatal. It is important to ensure that your windows are in good condition.

Single-pane windows are relatively easy to replace and typically fit into frames that were previously in use very easily. If you have double-paned windows which are held together by internal beading, it will be difficult to remove and replace the panes that were previously in use. In this case you'll need locate some plastic spacers that will assist the new pane to fit correctly into the frame of the window.

Wearing eye protection and thick gloves is a must if you plan to remove the glass by yourself. It is also an excellent idea to lay down a drop cloth prior to when you begin working on the glass, so that any shards will fall on the fabric instead of onto the floor, where they could be trodden under and cause further damage.

It's a great idea to tape the gap once the glass is removed. This will prevent drafts and water from getting into your home until a professional arrives to repair the window. It also acts as a barrier to prevent any intruders from getting into your home. If the gap is particularly large, you might want to consider using an alarm door that comes with an integrated window as this will offer the best of both worlds.

2. Sagging

uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash windows. However, over time they are susceptible to a range of issues like sliding. A sagging window in uPVC can cause issues with light, draughts, and even security. If you find that your uPVC window is beginning to shrink, it's crucial to act fast to prevent the problem from getting worse.

Repositioning the hinges can help fix a window that is sliding. To accomplish this, you'll need to open the window to get to the frame. You can then unscrew both the top and bottom hinges using a screwdriver, and then adjust them clockwise or counter-clockwise. After you've repositioned the hinges, shut your window and check for an appropriate fit. If you're satisfied with the fit, you can tighten the screws until they stay in the right place.

If you can't reposition the hinges you may require replacing the seal. Seals made of rubber can dry out and lose their elasticity over time, which causes them to loosen. It is crucial to replace your seal as soon as you can to keep your uPVC window watertight and draughtproof.

uPVC handles can also loosen up. This is usually due to screws that have become undone over time, but it can also be caused by the handle mechanism wearing out. Fortunately, it's easy to fix the loose uPVC window handle yourself. First, you'll need to close the window and perform an initial test fit. The corners of the sash should align with the casing joint. If it isn't then you can use a screwdriver or a wrench to loosen the handle and return the mechanism to its original position.

3. Water Leaks

If you awake to damp floors and mouldy walls each time it rains it is important that you take action. Water leaks through windows can cause structural damage to your home and impact your ability to regulate the temperature inside your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

It is a fairly easy fix and should be undertaken by any DIY expert. Depending on the severity of the issue is, old caulking may have to be removed. It is essential to remember that when it comes to uPVC window repairs you should avoid the temptation to "over-caulk and then make the area harder to clean and can reduce the efficiency of your energy.

It is important to check that the drainage holes are free of debris and that the sill pan is placed correctly so that it drains away from the window. In more extreme situations, you may have to replace the window.

Other indicators of long-term water leakage include decayed sills and the appearance of black spots of mold on the wall near the window. This fungus thrives under conditions of dampness and can spread quickly throughout the house.

If the leakage is occurring between the double glazed window repairs-glazed window, it is more likely the issue is more with the seal than the frame. This can be easily fixed by a uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame for the reason that your uPVC window is difficult to open or if it opens in a breeze. They can be repaired by any DIYer who is skilled and are usually completed in a matter of minutes.

Nearly every home in the UK will have either top hung or side-hung uPVC windows that are hinged and, just like any mechanical component they can wear down over time. It is very easy to replace a hinge on a window however it is easier if someone helps you to hold the frame.

Make sure that the uPVC hinges open and close in the correct direction. Look for the arrows that are on each hinge to determine which way the window should be opened.

Window hinges that aren't working properly can be caused by incorrectly opening the window in a certain way or by improper installation in the factory. It is usually possible to fix the issue by sending us a photograph via our website and we will be happy to give you advice.

Regular lubrication of the hinges is essential. Applying an engineering lubricant that is light to the hinges is a good way to do this. We suggest using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also reduce the possibility of a window getting stuck and stop corrosion. This must be done at a minimum once a year. WD40 and other solvent-based lubricants are not recommended as they can damage your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by different things. The hinges can also be disaligned as a result of wear, which can cause gaps where the sash and frame meet. If they are beyond repair, it may be necessary to get them re-aligned. Secondly the interlock, this is located on the hinge of the window, can also become misaligned, again it may be feasible to give them a thorough clean, however in some instances it could be necessary to have them replaced.

The next common reason for draughts are the window seals, these can become worn down or damaged over time and allow air to escape through these gaps. Replacement of these with high-quality weatherstripping will help to stop draughts. Replace the windows made of upvc with low-emissivity lenses. This will help to regulate indoor temperatures and decrease draughts.

Lastly, one of the most effective methods to reduce draughts is by using a draught excluder, these are usually fabric tubes filled with some type of filler. They can be placed on top of your windowsill. They will help block out cold air and keep your home warm and cozy!

With a bit of regular maintenance and repairs, your upvc windows will provide a great level of security and insulation for your home. It is crucial to recognise that all windows have a life span and they may reach the point when it's more economical to replace them than repair them. So, if you are having issues with your upvc windows, it is recommended to seek help from a professional as soon as possible.