Double Glazed Window Repair

Double glazing is an energy efficient investment that reduces loss of heat in winter months and helps keep your home cooler during the summer. Having your double glazed windows repaired as needed is a great way to ensure that they function effectively.

Over time condensation and misting may be detrimental to your double-glazed windows. Double glazed windows can be difficult to open and close.

Broken Panes

A rogue ball, a flying stone from your lawnmowers or a strong storm can shatter your double-pane windows which can expose your home to the elements. Although a window that is cracked can be difficult to repair however, you don't have to replace it completely. The insulated glass that is between two glass panes is in good condition So you can repair your double-paned windows yourself.

First, you'll need to take any broken glass from the frame. This is messy work and you'll need to take care to prevent any glass fragments from falling on the floor or slipping out of the frame. Wear gloves for you hands, seal and an abrasive cloth around the damaged glass to avoid any further injury or cuts. After removing the broken pane, carefully clean the entire frame of the window to eliminate any remaining sealant and debris. Sand rough areas of the frame to create a smooth surface to install your new glazing.

Once the frame is cleaned, you can apply a new layer of glass to the place where the damaged pane was removed. This is the best method to keep your window sealed and protected, and it will help you save energy costs by keeping water and drafts from entering your home. The next step is to choose the right glazing material. There are several options available, including clear tape which is more robust than regular tape and will keep your window from further cracking, and glazing film that resembles clear plastic wrap. This type of wrap has the advantage that it can be painted to match your frame and will also keep out snow and ice.

No matter what material you use it's essential to press the glaziers points into the seam where the putty meets your frame. These will hold the glass in place, and aid in adhering to the frame. Glazier's points can be found in hardware stores, and are available in pre-made ropes that you simply roll out onto the frame rabbets.

Condensation

If you're experiencing problems with condensation, it's recommended to contact your window manufacturer. There are warranties and guarantees to address the issues. Condensation and fogging in the panes of glass is an obvious sign that the seals between your windows are damaged and can only be fixed by a professional who will replace both panes.

It's a difficult procedure that requires special tools to remove and replace the old window. A professional can complete this task and supply the tools. It is recommended to leave the task to an expert. These tools can be risky.

Wear safety gloves and glasses if opt to do it yourself. You could be exposed to glass fragments flying around. It is also crucial to remove all putty and metal glazing points from the grooves in which the new window will be. You should also brush the frame with wire and vacuum or wipe with a damp cloth. Once the frame has dried it is time to order an additional piece of glass that's 1/8" shorter in both directions than the existing window. Check the glass's fit into the grooves.

You'll have to apply a layer of silicone caulk to the grooves of your frames to ensure that your glass is securely installed. After the silicone caulk is dried you can smooth it out and make any necessary adjustments. The wood molding can be reinstalled.

If the weather abruptly changes, double-glazed windows may become difficult to open and close. Extreme temperatures can cause the frames of double-glazed windows to expand or contract, causing them to sag and stick. You can try wiping down the frames with water and lubricating them in the event that this happens, but it may be better to seek advice from the company who installed your windows.

Misunderstood

Misted Double Glazing is a problem with windows that is caused by moisture getting trapped between the glass panes of double glazed windows. Double glazing consists of two panes which are separated by a space filled with argon for greater thermal efficiency. This creates an airtight seal that keeps warm room air inside and cold air outside which allows you to keep the temperature comfortable in your home.

In time, however, this seal may break and moisture can begin to accumulate between the window panes, causing them to become cloudy. This happens because the gap between the panes is heated by sun, which causes water vapour to form in it.

This is a natural occurrence however, if it happens between the panes of the window it could be a problem because it won't be able to regulate the temperature in the room. Instead the temperature outside of the window will influence the temperature inside. If you notice that your double-glazed windows have become blurred, call the experts at Northfield Glass to investigate.

We can replace the individual blown sealed unit without needing to replace the whole window which is less disruptive than a full replacement. Our misty window repair involves removing the glass, cleaning it, and then replacing it with a new one to make a watertight seal again.

There are companies in the field that claim to drill holes in your windows with mist and inject chemicals into them which they claim will eliminate the condensation and fog but we do not recommend this method. This method is not just unsightly but could also damage the toughened glass, leaving you with a window which doesn't function properly.

If you don't fix the problem immediately, it could lead to mould, which can not only cause damage to the window, but cause health risks for your loved ones. Moisture can cause other problems in your home, like dampness or rot. In certain cases the window might need to be replaced completely.

Blown or Failed

Modern double glazed windows have two glass panes with an inert gas or air between them. This improves their thermal efficiency by keeping heat in and cold out. As time passes, the gas may depressurize, leading to a number of problems.

Condensation between panes is among the most frequent. Although it's a normal phenomenon, it doesn't mean your window has failed, it can be an indication that you need to re-seal your windows. Condensation could be an indication that your double glazing is damaged in which case it will need to be replaced completely.

Double-glazed windows can also create draughts. This could be due to a failure of the seal or a damaged handle or lock. It is essential to fix this issue as soon as possible. A draught will cause you to pay more for heating. You can test the seals by feeling around the edges of your window frame to see whether you feel cold air.

Another sign that your window seals have failed is when you start to see water dripping on the inside of your windows. This is a good indicator that you need to re-seal your double glazed windows.

Your window frames have been designed to move a bit and this is essential to keep the glass sheets in their place. However, over time, this special packaging material can become compacted and this will break the all-important seal. This allows air to circulate between the panes, decreasing the energy efficiency of your window.

A blown seal is an obvious sign that your double glazing is damaged and needs to be fixed immediately. A blown seal will stop your double glazed window repairs near me glazing from fulfilling its primary purpose which is to keep the cold out and warm air in. In addition, a blown seal can let moisture in, which could cause mold and other uncomfortable conditions. It is important to contact a double glazing repair specialist as soon as you discover a blowing seal on your double-glazed windows, as they are able to replace the whole unit.