Repairs to uPVC Windows

upvc window repair is a great option for modern homes. They are easy to maintain, durable and long-lasting. They don't get rotten or rusty like aluminum or timber.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will help avoid unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window has been damaged, it can cause a huge amount of damage to your home, making it very dangerous and potentially fatal. It is crucial to take the time to ensure that you're doing all you can to keep your windows in good shape.

For single pane windows, it is fairly easy to replace windows, and the new one will usually fit inside the frame of the previous one easily. However If you have double pane windows that are held in place by internal beading, it'll be more difficult to take out the existing panes and install new ones. In this instance, it is necessary to purchase plastic spacers in order to help the new pane fit into the window frame.

If you are going to attempt to remove the window panes by yourself, it is essential to wear the appropriate safety equipment such as gloves that are thick and protective eyewear. It is also recommended to lay down a drop cloth before you begin working on the window panes to ensure that any shards fall onto the fabric and not onto the floor and could be trampled under.

After the glass has been removed, it's a good idea to cover the gap with clear packaging tape or duct tape to stop water and drafts from entering the property until a professional can come out and fix the window. It also acts as a barrier that will prevent any intruders from getting access to your home. If the gap is large, you might be interested in a security door that has an integrated window, as this will offer the best of both worlds.

2. Sagging

uPVC windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber windows with sash. In time, they could develop a variety of issues, including sagging. A sagging uPVC window can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to sag it is important to act swiftly to prevent the problem from getting worse.

To fix a sagging window you can try repositioning the hinges. To do this, you'll have to open the window to access the frame. With a screwdriver, you can take off the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after having repositioned your hinges. If you're happy with the fit, tighten the screws to ensure that they remain in place.

If you are unable to move the hinges, you could have to replace the seal. Over time rubber seals can lose their elasticity and dry out and cause their tightness to decrease. It is crucial to replace your seal as soon as you can to keep your uPVC window watertight and draughtproof.

uPVC handles may also become loose. Most often it is due to screws that have come loose over time. However, it can occur because the handle mechanism has worn out. Fortunately, it's easy to fix the loose uPVC window handle yourself. First, you'll need to shut the window and do an initial fitting. The corner joints of the sash should be aligned with the casing joint. If it isn't, you can use a screwdriver to loosen the handle, and then turn the mechanism back into its original position.

3. Water Leaks

It is important to take action if awake each day to find a smoky wall and floors that are wet. The leaks of water from windows do not only lead to the degradation of your home's structure but also undermine your efforts to control the temperature within your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is a simple fix that can be completed by anyone who is a DIYer with the skills. Depending on how severe the issue is, old caulking may need to be removed. It is important to keep in mind that when it is about uPVC window repairs, you should not be tempted to apply too much caulk' as this will only make the area more difficult to clean and can decrease the efficiency of your energy usage.

It is crucial to make sure that any drainage holes are free of debris and that the sill pan is angled correctly so that it drains away from the window. In more serious cases you might need to consider replacing the window.

Other signs of long-term water leakage include rotted sills and the appearance of black spots of mold on the walls near the window. This fungus thrives in damp conditions and can spread quickly throughout the home.

If the leakage occurs between the double glazed window repairs-glazed glass it is more likely that the problem is with the seal rather than the frame. It is also possible to be corrected by an uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or slack and open in a breeze it could be hinges that are at the fault. Anyone who is a skilled DIYer can fix hinges in just a few minutes.

Like any mechanical component hinges are prone to be damaged over time. It is very easy to change a window hinge, but it's easier if someone helps you hold the frame.

It is also important to ensure that the uPVC hinges are being opened and closed in the right direction. Look for the arrows on each hinge to determine the direction in which the window should be opened.

The issue can be caused by opening the window improperly or a faulty installation in the factory. This issue can be fixed by sending us a picture through our website and we will be pleased to offer you suggestions.

Regularly lubricating hinges is also essential. Applying a light engineering lubricant on the hinges is a great method of doing this. We suggest using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It also helps prevent corrosion and uPVC window repairs reduce the risk of sticking. It is recommended to do this at least once a year. WD40 or other solvent-based oils are not recommended as they can damage your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different things. The hinges can also be misaligned due to wear, creating a gap where the sash meets frame. If they are beyond repair, it could be necessary to have them realigned. In addition, the interlock could also become misaligned. This happens on the hinge's side and could require to be cleaned. In certain instances, it may be necessary to replace the hinges.

These seals are susceptible to wear and tear or become damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with low-emissivity glass. this will help in regulating indoor temperatures and again will reduce the risk of draughts.

One of the most effective methods to reduce draughts is by using a draught excluder. These are typically fabric tubes filled with some type of filler. They can be positioned on the windowsill on top. These will help to stop cold air from entering and keep your home warm and cozy!

Your windows made of upvc will remain a great source of insulation and security to your home by performing regular maintenance and repairs. It is crucial to keep in mind that all windows eventually wear out and it may be more cost-effective to replace them than to repair them. So, if you are having issues with your upvc windows, it is always recommended to seek help from a professional as soon as you can.