Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are easy to maintain and durable, as well as long-lasting. They don't rot or rust like aluminum or timber.

It is crucial to wash and oil UPVC doors and windows regularly. This will help avoid unnecessary repair costs and increase energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause serious damage to your home, and could even be fatal. It is essential to take the time to make sure that you are doing everything you can to keep your windows in good repair.

For single pane windows, it can be relatively simple to replace them, and the new window will usually fit inside the old frame very easily. However, if you have double pane windows that are anchored by internal beading it will be more difficult to remove the panes that are in place and replace them with new ones. In this case, you will need to source some plastic spacers that aid the new pane in being able to fit perfectly into the frame of the window.

If you're planning to attempt to remove the glass panes yourself it is crucial to wear the appropriate safety equipment that includes gloves with a thick layer of material and eye protection. You should also lay down a drop cloth before you begin working on the window panes so that any shards of glass fall onto the fabric and not on the floor and could be trampled.

It's a good idea to tape the gap once the glass has been removed. This will prevent drafts and water from getting into your property until a professional comes out to fix the window. This will also act as a barrier, deterring any intruders from getting access to your home. If the distance between the window and the door is large, you might want to use a security screen that also has windows. This will provide the best of both.

2. Sagging

uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash window. However, over time, they may be afflicted by a variety of issues like sagging. A sagging uPVC window can cause issues with light, draughts, and even security. If you notice that your uPVC window is beginning to sag it's crucial to act fast to prevent the problem from getting worse.

Repositioning the hinges could aid in fixing a window which is sliding. To do this, you'll have to open the window so that you can get to the frame. Then, you can remove the hinges on the top and bottom using a screwdriver and adjust them counter-clockwise or clockwise. Once you've adjusted the hinges, close the window and upvc Window Repair test it for fitting. If you're satisfied with the fit, you can tighten the screws until they remain in place.

If you cannot reposition the hinges, you could need to replace the seal. Seals made of rubber can dry out and lose their elasticity over time, which causes them to lose their tightness. It is essential to replace your seal as quickly as you can to ensure that your uPVC window watertight and draughtproof.

uPVC handles may also become loose. Often, this is caused by screws that have come loose over time. However, it could be due to the fact that the handle mechanism has been worn out. It's fairly simple to fix a loose upvc window repair handle. First, you'll need to close the window and do a test fitting. The corners of the sash must be aligned with the casing joint. If it isn't you can use a screwdriver to loosen the handle. Then, you can turn the mechanism to position.

3. Water Leaks

It is essential to take action if awake each day to discover mouldy walls and wet floors. Water leaks from windows are not just a cause for destruction of your home's structure but also undermine your efforts to regulate the temperature in your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

This is a simple fix that can be done by anyone who is a DIYer with the skills. Depending on how severe the issue is, old caulking might need to be removed. It is crucial to remember that when it comes to uPVC window repairs, you should not be tempted to apply too much caulk' as this will only make the area more difficult to clean and reduce your energy efficiency.

It is crucial to make sure that any drainage holes are clear of debris and that the sill pan has been angled properly so that it drains away from the window. In more extreme situations, you may have to replace the window.

Moldy sills and rotten ones are another sign of water leakage. This fungus thrives in damp conditions and can spread quickly throughout the home.

If the leakage is occurring between the double-glazed window, it is more likely that the issue is more related to the seal, not the frame. A uPVC specialist can easily fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and open with ease it could be the hinges that are at the fault. They can be easily repaired by any DIYer who is skilled and can usually be completed in just a few minutes.

Like all mechanical parts hinges are prone to wear out over time. Changing a window hinge is essentially a very simple process, but it's simpler if you have someone to help hold the frame up.

It is also important to ensure that the uPVC hinges are being opened and closed in the right direction. Look for the arrows that are on each hinge to determine which direction the window should be opened.

Window hinges that aren't working properly can be caused by incorrectly opening the window in a certain way or due to inadequate installation at the factory. This issue can be fixed by sending us a photograph via our website and we will be happy to give you suggestions.

Regularly lubricating the hinges is essential. Applying an engineering lubricant that is light to the hinges is a good method to accomplish this. We recommend using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window to operate and close more smoothly. It can also stop corrosion and decrease the chance of sticking. It is recommended to do this once a year. WD40 and other solvent-based lubricants are not recommended as they could damage parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by various factors. The hinges may also become misaligned due to wear, creating a gap where the sash meets frame. These can be easily repaired by giving them good clean, but in the event that they are beyond repair it could be necessary to have them aligned or replaced. The second is the interlock, which is located on the hinge of the window, may be misaligned. Again, it may be feasible to give them a thorough clean, however in certain cases, it may be necessary to have these replaced.

These seals are susceptible to wear and tear or get damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Another option is to replace the window repair with low-emissivity glass, this will help in regulating indoor temperatures, and also lessen draughts.

Another, and most effective ways to reduce drafts is to use a draught excluder. These are usually fabric tubes which are filled with a type of filler. They can be positioned on top of your windowsill. They will keep your home warm by blocking cold air.

The windows made of upvc can keep providing excellent insulation and security for your home with a little regular maintenance and repairs. It is essential to remember that all windows will eventually become worn out, upvc Window repair and it could be cheaper to replace them than to repair them. If you are experiencing issues with your window made of upvc it is recommended to speak with an expert as soon as possible.