Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are easy to maintain, durable and long-lasting. As opposed to aluminium and timber they are not susceptible to rust or rot.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will help prevent unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window has been damaged, it can cause a huge amount of damage to your home, which can make it extremely dangerous and possibly fatal. It is essential to take the time to ensure that you're doing all you can to ensure that your windows are in good condition.

Single-pane windows are fairly simple to replace, and they generally fit into frames that were previously in use very easily. However If you have double pane windows that are secured by internal beading it will be more difficult to remove the existing panes and install new ones. In this instance it is essential to buy plastic spacers to aid in fitting the new pane into the window frame.

Wearing eye protection and heavy gloves is a must when you are planning to remove the glass yourself. It is also recommended to lay down a dropcloth prior to you begin working on the window panes to ensure that any shards of glass fall onto the fabric and not onto the floor which could cause them to be trampled under.

Once the glass has been removed and the glass is removed, it's a good idea to cover the gap with clear packaging tape or duct tape to prevent drafts and water from entering the home until a professional is able to come out and fix the window. This will also act as a barrier, preventing any intruders to gain access into your home. If the gap between the door UPVC window repairs and the window repair near me is substantial, you may prefer a security screen that also has windows. This will provide the best of both.

2. Sagging

upvc window repairs near me windows and doors are a low-cost energy-efficient, durable and long-lasting alternative to timber windows with sash. However, over time, they are susceptible to a range of issues like sagging. A sagging uPVC window can cause issues with light, draughts and even security. If you notice that your uPVC window is beginning to sag it's important to act quickly to prevent the problem from worsening.

Repositioning the hinges could help fix a window that is sagging. To do this, you'll have to open the window to access the frame. Then, remove both the top and bottom hinges using a screwdriver, and then adjust them counter-clockwise or clockwise. Close your window to check the fit after you've moved your hinges. If you're happy with the fit, tighten the screws to ensure that they remain in place.

If you can't reposition the hinges you may need to replace the seal. Over time, rubber seals lose their elasticity and become dry which causes them to lose tightness. If this happens, it's important to replace the seal as quickly as possible so that your uPVC windows remain watertight and draught-proof.

UPVC handles can also become loose. This is typically caused by screws that have become undone over time, but it could be due to the mechanism of the handle wearing out. It's relatively easy to fix a loose uPVC hand. You'll first need to close the window and do an experiment fitting. The joint at the corners of the sash should be aligned with the joint on the casing. If it isn't then you can use a screwdriver or a wrench to loosen the handle and then return the mechanism to its original the position it was in.

3. Water Leaks

If you awake to damp floors and mouldy walls each time it rains, it's crucial to take action. The leaks of water from windows do not only lead to the degradation of your home's structure but also undermine your efforts to regulate the temperature within your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is a relatively easy fix that can be completed by any competent DIYer. Depending on how severe the problem is, the old caulking may have to be removed. It is essential to remember that when it comes to uPVC window repairs, you should not be tempted to 'over-caulk in order to make the area harder to clean and can reduce your energy efficiency.

It is essential to ensure that any drainage holes are free of debris and that the sill pan is angled in a way that allows it to drain away from the window. In more serious cases you may need to think about replacing the window.

Other indicators of water leakage are rotted sills and the appearance of black spots of mold on the walls near the window. This fungus thrives under damp conditions and can spread quickly throughout the home.

If the leakage is occurring between the double-glazed window, it is more likely the issue is with the seal rather than the frame. A uPVC specialist can fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or loose and blow open in a breeze It could be hinges that are at fault. Any competent DIYer can replace hinges in just a few minutes.

Like all mechanical parts hinges will wear out over time. It's easy to replace a hinge on a window but it's much simpler if you have someone to help you to hold the frame.

It is also important to ensure that the uPVC hinges are being opened and closed in the right direction. You can check this by looking for the arrow on each hinge, this indicates the direction in which the window should be opened.

The problem can be caused either by opening the window improperly or by a poor installation in the factory. This issue can be fixed by sending us a photo through our website and we will be happy to give you suggestions.

Regular lubrication of hinges is also essential. This can be done by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It also helps prevent corrosion and reduce the risk of sticking. This should be done at least once a year. WD40 and other solvent-based fluids are not recommended since they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by different causes. Firstly the hinges, again due to wear and tear can become misaligned, this causes a gap to form where the sash joins the frame. These can be easily fixed by giving them a thorough clean, however in the event that they are beyond repair it may be necessary to get them realigned or replaced. Secondly the interlock, this is located on the hinge side of the window, may also become misaligned, again it's possible to just give them a good clean, but in certain cases, it may be necessary to have these replaced.

The next common cause of draughts is the window seals, these are susceptible to being worn out or damaged over time, and will allow air to escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity glass. This will help regulate indoor temperatures and lessen draughts.

Another, and most effective methods to reduce the draughts in your home is to use a draught excluder, these are usually fabric tubes which are filled with a kind of filler. They can be put on top of your windowsill. They will keep your home warm by blocking cold air.

With a bit of regular maintenance and repair your windows made of upvc will continue to provide an excellent level of security and insulation for your home. However, it is important to recognize that windows last for a certain period of time and they may reach an point at which it is more economical to replace them than repair them. If you are experiencing issues with your upvc window, it's best to consult a professional as soon as possible.