Peugeot 208 Key Replacement

peugeot 308 key fob replacement 208 key replacement is best left to professional auto locksmiths who have the appropriate tools and know-how. They can program and create keys quicker and more efficiently than a dealership.

A dead coin battery is most likely to blame the reason your key-fob stops locking or unlocking doors. But, there are other reasons that the key may be malfunctioning.

Dead Coin Battery

A dead coin battery can hinder your Peugeot 208 from locking or unlocking, and will not start the engine. If this is the scenario, you'll need use the backup starting method that is detailed in your vehicle's owner manual.

The spark plugs may also be worn out. The spark plugs light the fuel to start the engine. However they are limited in their lifespan. If they're not used enough and they fail, they'll eventually die.

There is a simple solution for this problem. The best solution is to measure the voltage of your car battery with a multimeter. If it is below 11.5 volts and you are not satisfied, then it is time to replace it. It is also necessary to clean the contacts of the battery in case it is corroded. This can be done by removing the rubber covers off the two terminals of the battery, and then using a wirebrush to eliminate any corroded battery parts. Then, peugeot 208 key replacement reconnect the cables for the positive and negative poles.

Water Damage

If your 208 doesn't start and the battery hasn't fallen flat, it is time to check the spark plugs. It is possible that they are just overly filthy, making them unable to spark. The spark plugs can be cleaned in the workshop.

Peugeot cars use a key with a transponder compatible with the immobiliser. This guarantees that only the right key can turn the engine. If the chip inside the Peugeot key is damaged, it will not transmit the proper signal to the vehicle.

Water damage is the most common reason for this issue. This is most common in colder climates where the vehicle may have been exposed to snow or rain. If this is the case, you should get in touch with a reputable locksmith who will have all of the equipment and tools needed to modify the new key. They will also have the most up-to-date technological know-how and the equipment required to make a Peugeot 208 smart key. The process shouldn't take more than 15 minutes.

Contacts to the battery are not working properly.

Peugeot replaced the transponder chips with a new model that is based on electronic components mounted on a circuit board. The new system is effective when it's fresh, however, over time, the circuit boards begin to degrade and stop working correctly.

This could prevent the immobiliser chip from triggering the immobiliser chip, causing your car not to start. If this is the case, it's recommended to contact a Peugeot specialist or locksmith.

Another common issue is when the key fob battery is dying, this causes the blade of the key to stop being able to feed into the lock. A locksmith from your vehicle can replace the battery and cut a new blade for you, this is generally a quick fix.

Faulty Receiver Module

It could be that the receiver module has a problem If your Peugeot key fob doesn't work after being dropped on the floor, or exposed to a stormy rainstorm, or accidentally washed. The receiver module is responsible for transmitting radio signals to the onboard computer that controls the central locking system of your Peugeot vehicle.

The key fob itself is fitted with rubber seals that block water from reaching the chip inside. However, prolonged exposure to water may cause damage to these seals and the chip. The high salt content of the pool or ocean water could cause damage to the key fob, especially if it is submerged.

If your Peugeot spare key fob stops working, you'll need to have the module replaced. This can only be performed by a professional auto locksmith or Peugeot specialist. Peugeot keys unlike other automobiles, are secured by an immobilizer device. This requires the correct code to begin the car. This is the reason that you should only rely on the Peugeot locksmith to create and program a replacement.

Computers with faulty on-board computers

The computer on board of your Peugeot is responsible for various features in your car, including airbags and power windows. If something is wrong with these systems, they will usually display a code that identifies the problem. This code will be stored within the system until the problem is resolved. Most often, this involves replacing the computer on board.

One of the most frequent reasons for the airbag light coming on is loose or corroded connectors in the airbag sensor. This can be caused by wear and tear, age or exposure to salt and moisture. This issue must be taken care of as soon as you can, since an airbag malfunctioning could pose a risk in the event of an accident.

If your Peugeot is showing a card not detected error, the battery inside the key fob might be weak or dead. This prevents the key fob from transmitting a signal that will disable the standard immobilizer in your vehicle. Try this by pressing the unlock button on the fob's key, then trying to start your vehicle. If this doesn't work, the key battery needs to be replaced.