Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are durable, long-lasting and easy to maintain. As opposed to aluminium and timber they do not get rusty or decay.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will save you from unnecessary repair costs and also increase energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause severe damage to your home and even be fatal. It is important to take the time to make sure that you're doing everything you can to ensure that your windows are in good shape.

Single-pane windows are relatively simple to replace and generally fit into frames of the past easily. If windows with double panes are held together by internal beading, it will be harder to remove and replace the old panes. In this situation you'll need to locate some plastic spacers that will help the new pane to fit correctly into the frame of the window.

If you plan attempt to remove the glass panes yourself it is crucial to wear the appropriate safety equipment, including thick gloves and protective eyewear. It is also recommended to lay down a dropcloth before you begin working on the window panes so that any shards of glass fall onto the fabric and not onto the floor which could cause them to be trampled.

Once the glass is removed, it's a good idea to seal the gap with some clear packaging tape or duct tape to block water and drafts from getting into the home until a professional is able to come out and fix the window. This also serves as an obstacle to stop intruders from making their way into your home. If the distance between the door and the window is significant, you may need to consider security screens that includes an opening. This will give you the best of both.

2. Sagging

uPVC windows and doors are a low-cost energy-efficient, durable and long-lasting alternative to timber windows with sash. However, over time, they can suffer from a variety of issues like sliding. A window that isn't properly aligned can cause problems with light, draughts or even security. If you notice that your uPVC window is beginning to shrink, it is important to act swiftly to prevent the problem from worsening.

Repositioning the hinges can aid in fixing a window that is sliding. To accomplish this, you'll have to open the window so that you can access the frame. Then, remove both the top and bottom hinges using a screwdriver and adjust them clockwise or counter-clockwise. After you've repositioned the hinges, shut your window and check for fitting. If you're happy with the fit, you can tighten the screws until they remain in position.

If you can't reposition the hinges, window repairs you may need to replace the seal. Over time, rubber seals lose their elasticity and become dry which causes them to loosen. It is essential to replace your seal as soon as you can to keep your uPVC window watertight and draughtproof.

upvc window repair near me handles can also become loose. This is often caused by screws that have been removed over time, but it could also be due to the mechanism of the handle getting worn out. It's relatively simple to fix a loose uPVC handle. First, you'll need to close the window and perform a test fit. The corners of the sash need to be aligned with the casing joint. If it isn't, you can use a screwdriver or a wrench to loosen the handle and turn the mechanism back into its original position.

3. Water Leaks

If you're waking up to damp floors and mouldy walls every time it rains it's crucial to take action. Water leaks from windows are not just a cause for degrading of the structure of your home but also hinder your efforts to regulate the temperature inside your home. The most common reason for leaking uPVC windows is that the sealant surrounding the frame is damaged or not present.

This is a fairly simple fix that can be completed by any competent DIYer. Based on the severity of the problem the caulking used previously may need to be removed before a new layer can be applied. It is important to remember that when it is about uPVC window repairs, do not be tempted to apply too much caulk' as this will only make the area harder to clean and reduce the efficiency of your energy.

It is essential to ensure that any drainage holes are clear of debris and that the sill pan is placed correctly so that it drains away from the window. In more severe cases, you may need to replace the window.

Mold spots and rotten sills are another sign of water leakage. This mold thrives in damp environments and can quickly spread throughout the house.

It is also important to remember that if the leakage is coming from between the glass of your double glazed windows, it's more likely to be an issue with the glass seal rather than the frame or sagging. It is also possible to be repaired by an uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault when your upvc window repair window is difficult to open or if it blows open with an ease. Anyone who is a skilled DIYer can fix hinges in just a few minutes.

Almost every household in the UK will have top-hung or side-hung uPVC windows that are hinged and, like all mechanical parts, they will wear out over time. It is very easy to change a window hinge but it's much easier if someone helps you hold the frame.

It is also important to verify that the uPVC hinges are being opened and closed in the correct direction. Check for the arrows on each hinge to determine which direction the window should be opened.

The issue could be caused due to opening the window in the wrong way or due to a poor installation in the factory. Sending us a photo through our website can often resolve the problem. We are happy to provide advice.

Regular lubrication of hinges is also essential. Applying a light engineering lubricant on the hinges is an ideal way to do this. We suggest using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also lower the risk of a window sticking and prevent corrosion. This should be done at least every year. WD40 and other solvent-based fluids are not recommended since they can damage the parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by a few different factors. The hinges, also because of wear and tear, may become displaced, which can cause an opening to appear where the sash meets the frame. If they're beyond repair, it could be required to realign them. The interlock may also become disaligned. This is located on the hinge's side, and might require to be cleaned. In certain instances it is possible to replace the hinges.

The seals may wear out or be damaged over time, allowing air to escape. Replacement of these with high-quality weatherstripping can help keep draughts at bay. Another alternative is to replace the window with glass that is low-emissivity, this will help to regulate indoor temperatures and again will lessen the risk of draughts.

Another method of reducing draughts effectively is by using a draught-excluder. These are typically fabric tubes filled with a filler, which can be placed over your window sill. They will help keep cold air out and keep your home warm and cosy!

Your upvc windows can keep providing excellent insulation and security for your home by performing regular maintenance and repairs. It is important to remember that all windows will eventually wear out and it may be more cost-effective to replace them instead of fixing them. If you have any problems with your window made of upvc it is recommended to speak with an expert immediately.