Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are durable, long-lasting and easy to maintain. They do not get rotten or rusty like aluminum or timber.

It is important to clean and oil UPVC windows and doors regularly. This will help avoid unnecessary repair costs as well as improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows could cause severe damage to your home and even be fatal. It is essential to take the time to ensure that you're doing everything you can to ensure that your windows are in good shape.

Single-pane windows are relatively easy to replace and generally fit into frames of the past easily. However when you have double pane windows that are secured by internal beading, it'll be more difficult to get rid of the existing panes and install new ones. In this instance you'll need source some plastic spacers to assist the new pane to fit perfectly into the window frame.

Wearing eye protection and thick gloves is a must for anyone who plans to remove the glass yourself. You should also lay down a drop cloth before you begin working on the window panes, so that any shards of glass fall onto the fabric and not on the floor and could be trampled.

It's a good idea to seal the gap after the glass has been removed. This will stop water and drafts from entering your home until a professional arrives to repair the window. This will also act as a barrier, deterring any intruders from gaining entry to your home. If the gap is particularly large, you might think about a security door that has an integrated window as it will provide the best of both worlds.

2. Sagging

uPVC windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber sash windows. However, with time, they are susceptible to a range of issues, including sagging. A sagging window in uPVC can cause problems with light, draughts and even security. It is crucial to act as soon as you notice your upvc window repair windows are falling down.

To repair a window that is sagging, you can try repositioning the hinges. To accomplish this, you'll have to open the window so that you can access the frame. After that, using an screwdriver, take off the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after you have moved your hinges. If you are happy with the size of the window, tighten the screws to keep them in the right position.

If you cannot reposition the hinges, you could need to replace the seal. As time passes, rubber seals lose their elasticity and dry out and cause them to loosen. If this happens, it's important to replace the seal as quickly as possible to ensure your uPVC windows are watertight and safe from drafts.

UPVC handles can also become loose. Often it is due to screws that have become loose over time. However, it could be due to the fact that the handle mechanism has worn out. It's a good thing that it's simple to repair the handle of a window repairs near me that is loose yourself. First, you'll need to close the window and then perform an initial fitting. The joint at the corners of the sash should be aligned with the joint on the casing. If it doesn't, you can use a screwdriver or a wrench to loosen the handle and reverse the mechanism back into position.

3. Water Leaks

If you're waking up to damp floors and Upvc Window Repairs mouldy walls each time it rains, Upvc Window Repairs it is important that you take action. Leaks of water from windows can cause structural damage to your home, and hinder your ability to control the temperature of your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

This is a relatively easy fix that can be completed by any skilled DIYer. Based on the severity of the issue the caulking that was used up may need to be removed before a new layer of caulk is applied. It is crucial to remember that when it comes to uPVC window repairs, do not be tempted to 'over-caulk' as this will only make the area more difficult to clean and can reduce your energy efficiency.

It is important to check that the drainage holes are clear of debris and that the sill pan has been angled correctly so that it drains away from the window. In more serious cases, you may need to replace the window.

Other indicators of water leakage are sills that are rotten and the appearance of black spots of mold on the walls near the window. The is a fungus that thrives in damp conditions and is able to quickly spread throughout the house.

It is also important to remember that if the leak is coming from between the glass in your double glazed windows, it is more likely to be a problem with the glass seal, rather than the frame or sliding. It is also possible to be corrected by a uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or slack and open with ease It could be the hinges that are at fault. These are easily repaired by any skilled DIYer and are usually completed in a matter of minutes.

Almost every household in the UK will have top-hung or side-hung uPVC windows that have hinges and, just like any mechanical component they will wear out over time. The process of replacing a hinge on a window is an easy procedure, but it is easier if you have someone to assist in holding the frame in place.

It is also important to verify that the uPVC hinges are opening and closed in the correct direction. This can be done by looking for the arrows on each hinge, this indicates the direction in which the window should open.

The problem with the hinges on windows could be caused by improperly opening the window in a certain way or by poor installation at the factory. This issue can be fixed by sending us a photo on our website. We will be more than happy to give you suggestions.

Regularly lubricating the hinges is also necessary. Applying a light engineering lubricant to the hinges is a good method of doing this. We recommend using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window to operate and close more easily. It also decreases the risk of a window getting stuck and stop corrosion. The ideal time to perform this every year. WD40 and other solvent based oils are not recommended because they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by several different factors. Firstly the hinges, again because of wear and tear, may become displaced, which can cause a gap to form where the sash meets the frame. If they're beyond repair, it could be required to realign them. The interlock, which is on the hinge side of the window, may also be misaligned, and again it may be possible to give them a good clean, but in some cases it might be necessary to get them replaced.

The second most frequent reason for draughts is window seals. These are susceptible to being worn out or damaged over time and will allow air to escape through the gaps. Installing high-quality weatherstripping can help prevent draughts. Replace the upvc windows with low-emissivity glass. This will help control indoor temperatures and decrease the risk of draughts.

Another, and most effective ways to cut down on draughts is by using an draught excluder. These are usually fabric tubes which are filled with a kind of filler. They can be placed on top of your windowsill. These will help to stop cold air from entering and keep your home warm and cosy!

Your upvc windows can keep providing excellent insulation and security in your home with a little regular maintenance and repairs. It is essential to remember that all windows will eventually become worn out, and it is cheaper to replace them rather than repair them. If you are experiencing issues with your window made of upvc you should consult an expert as soon as possible.