How to Select Electric Heaters

Electric heaters have a number of advantages they offer, including lower initial costs, low maintenance for homeowners and efficient heating. They're also more convenient than heating systems that require venting.

They are especially useful when your electricity provider offers Economy 7 because the less expensive off-peak rate will help you save money on the cost of heating.

Temperature Settings

Ideally the electric heater should enable you to set the temperature you like, then keep that temperature constant without the need to switch it off and on. This will help save energy and prevent you from entering or leaving a room too cold. Find a thermostat and if possible one with a timer function.

When choosing an electric heater, be sure it is rated for the space you have. A heater that's too small will have to run for longer in order to reach the desired temperature. This can waste energy and can cause your space to overheat. Utilize our calculator to determine the ideal heater size for your space in terms of watts per sq. foot.

Also, ensure that the temperature adjustment knobs are easy to access and adjust. It is possible remove screws or remove insulation to reach the knobs, if they are recessed. This can be a problem. It's also important to check the recommended temperature range for safety and efficiency reasons. Temperatures lower than 120 degrees can lead to bacteria growth and increase the risk of scalding while temperatures that exceed 140 degrees may be a fire hazard.

The Everhot is an elegant compact heater that can be put to use in conservatories, or as the company says: "annexes... narrow boats... shepherds' cabins... glamping pods." It can reach up to 200C and is therefore a good choice to heat as well as cooking. It comes with a timer as well as an ECO mode that optimizes heat and power settings to make it more energy efficient.

It is also very quiet. There isn't any fan noise or whirring sound when you change the settings. This makes it a good choice for bedrooms or living rooms. It also has a few additional features that are useful, like a built-in nightlight which glows blue when the heater is on and a built-in humidifier which can be turned on to an intermittent mist mode to provide a more subtle effect. It's also sturdy and safe, with a tip over shutoff switch as well as an overheating safety feature that will shut off the unit automatically in the event of overheating. It's also registered with UL for safety.

Safety

Electric heaters should be used with care. Risks of fire from heaters as well as carbon monoxide (CO) poisoning can be particularly dangerous for people with a disability, elderly or those with chronic health issues or immune system issues. Pets and children may also knock a heater over which can cause injury or even death.

ESFI recommends that you check the heater's cord and plug regularly. Look for signs of damage such as a cracked plug, a loose cord, or if the plug is loose or cracked. If the cord or outlet feels hot, stop using it and call a licensed electrician to replace it. Also, do not plug multiple electrical devices into the same outlet, including a space heater; it could overload the outlet and result in overheating.

It is recommended to use only heaters that have been identified or labeled by a nationally recognized testing laboratory, like UL. These products are more likely than others to meet voluntary safety requirements. Also, do not place a heater on easily flame-prone surfaces, like rugs and textiles. Keep a minimum of three feet between the heater and any combustible material. Also, do not place heaters near the bathroom or in the kitchen. Never touch it when you are wet.

Additionally, be certain to plug an electric heater directly into a wall outlet, not an power strip or extension cord. If you must use an extension cord, [empty] make sure you choose the cord that is the shortest and most heavy-duty comprised of 14-gauge wire. Also, check for any loose outlets that could be an indication of a circuit that is overloaded.

Keep the electric space heater at least six inches from anything that could ignite. It's also a good idea to place a space heater on flat surfaces instead of putting it on tables, cabinets or furniture, which can overheat and cause fire. Don't forget to unplug and switch off the heater prior to leaving the room.

Utilizing the correct safety measures when using white log burner electric heaters can help avoid injuries and decrease the energy use. As temperatures drop, facility managers frequently turn to electric heaters to provide warmth in office spaces and common areas. Preferred Climate Solutions installs and provides maintenance for outdoor and indoor electric fireplace stove heating systems to make your facility as comfortable during the cold winter months as is possible. Contact us today for more about our heating solutions.

Energy Efficiency

Take into consideration the energy efficiency of a portable heater prior to making your choice. This refers to the amount of energy needed to achieve the desired output. Heaters that use less electricity are considered more efficient and will help lower the total cost of heating a house or business.

The majority of electrical heaters convert electrical energy into heat using a heating element. It is typically made up of a ribbon or coil flexible heater or tubular element that releases heat when a current flows through it. The amount of heat that is produced is dependent on the heating element and the method used by which it transmits heat (convection or radiation).

If you're concerned about the effect on the environment, select an option that uses green energy sources. This could be a renewable source of power or a substitute for fossil fuels, such as wind or solar.

The efficiency of energy used by an electric heater is also dependent on the source of electricity from and the method of generation. Electricity derived from a wind or solar power plant is more efficient than electricity derived from burning fossil fuels in a power station.

You shouldn't just pick the heater that has an eco-friendly energy source, but also one that has various energy-saving features. This could include automatic shut-off systems in the event of overheating or in the event that the unit is accidentally tipping over.

These security measures will help protect your family members or employees, and will also help you save money on energy bills by preventing excessive usage. A lot of portable electric heaters are designed to operate quietly as well making them suitable for offices, bedrooms and other spaces which require a calm space.

Another way that electric heaters can save you money is by reducing the number of maintenance calls you'll need to make. Gas heaters are more expensive to fix than an electric model and the cost of maintenance can add up over time. Electric models are generally cheaper to maintain, and they usually have more advanced features that can assist you in conserving energy.

Installation

Electric heaters operate on the basis of Joule energy, converting electricity into radiant heat that warms the room. They're also efficient and cost-effective in comparison to other forms of heating systems, particularly gas. They aren't suitable for all households and can cause strain on an existing electrical system. It is essential to have an electrician check the system prior to installing the wall heater.

There are many aspects to take into consideration when selecting an White stove electric fire heater, which includes the type of heater and the space you intend to put it. The type of heater you choose will determine the amount it costs to operate. Electric baseboard heaters can be more expensive to run than space heaters or portable heaters, however they provide more uniform heat and do not require chimneys or vents.

Electric fan heaters include a blower which circulates hot air throughout the room. This kind of heater is usually most economical to run, however it can be loud and takes longer to heat rooms than other kinds of electric heaters.

Choose the space heater with a built-in thermostat. This feature allows you to set a temperature target and the heater shuts off automatically when it attains that temperature. This feature can help reduce the energy use and also save you from having to turn the heater on and off.

Before attempting to install an electric heater, ensure that the power is turned off on the breaker panel. Also, confirm that the circuit is off using a test device. Mark the location on the wall where you plan to install the heater and cut a hole in the drywall. Use a drywall cutter to cut off the needed section. Be careful not to damage any electrical pipes or wires.

Use a 14/2 cable of the same gauge as the wires already in place from the panel for the breaker to the wall opening. Remove about 1 inch of insulation off the ends of each conductor wire and connect them to an accessible screw in the outlet box. The wire you identify as the "line" by labeling it or marking it with a piece red tape, and connect it to the wire leads marked "load" in the thermostat box.