Ghost Immobiliser 2

Secures your vehicle from key cloning and stops thieves from driving your vehicle with the original keys. Our latest immobiliser is connected to your vehicle's CAN data network and a unique PIN must be entered to start the engine.

Contrary to trackers Ghost does not transmit any radio frequency signals and cannot be detected by diagnostic tools. ghost immobiliser installation doesn't have LED indicators or buttons that would signal its presence in your vehicle or van.

Anti-key Cloning

The ghost immobiliser was designed to combat key hacking and cloning. The device is connected to your vehicle's data network CAN and creates a unique pin number using the factory buttons in your dashboard and steering. This prevents the thief from being able to start your car. If the incorrect PIN code is entered, your car cannot be started which makes it impossible for them to escape with your pride and joy.

Ghost immobilisers are new technology that is extremely difficult for thieves to defeat. The ghost immobiliser, unlike physical deterrents such as wheel locks and steering locks that are able to be cut, is a discrete electronic device. It can't even be detected by thieves because it emits no radio signals and is operated in a silent manner.

This next-generation immobiliser can protect your car against a variety of threats, including key hacking relay attacks, key hacking and Ghost 2 immobiliser duplicate copies. It also has the ability to stop the thief from adding the new key or replacing your ECU by ensuring that it does not allow them to start your car without entering the correct PIN code first.

The ghost immobiliser 2, unlike other immobilisers does not require the use of a remote control or key fob to operate. It can be deactivated through an app on the smartphone of the driver. This makes it ideal for those occasions when you have to give your car to valet parking or maintenance without key fobs.

The Autowatch Ghost-II is the latest version of our groundbreaking ghost immobiliser. It was designed to be as easy and convenient to use as possible, but remains as secure as ever. This is achieved by connecting the ghost 2 immobiliser fitting near me-II with the vehicle's CAN data network, meaning there are no extra wires that could be concealed or easily spotted. It also has an integrated feature that allows you to disable your Ghost-II by connecting it to the vehicle's Bluetooth which means you can go out and drive without any hassle.

OBD port hacking

OBD port hacking is the latest method used by professional car thieves. Thieves have access to your vehicle's OBD port with no more than a laptop, an application and a few cables, which can be purchased on the internet for less than PS50. Once they have access to your vehicle's OBD port, they will be able to do whatever they want from setting fault codes, and tuning your car to taking away your pride and joy in less than a minute.

If you have an Ghost immobiliser installed, it will protect your vehicle from theft using this method, by needing a unique PIN sequence is entered into the fob of your key in order to start the engine and drive away. It does this by interacting with the vehicles ECU (Engine Control Unit) via the CAN Data circuit, and is completely undetectable to any RF scanning or code grabbing technology. It also includes a Service/Valet mode that allows your vehicle to start without the need for a PIN.

You'll also require an OBD cable that has OBD pins, which are connected to the CAN bus. These cables are available on eBay or Amazon for around PS50. Also, you will require a cable with OBD pins that are connected to the CAN Bus. These cables can be bought at Amazon or Ebay for around PS50. The cable has to be connected to the wiring harness of your car, for example the radio wiring harness.

Once the hacker has access to the OBD port of your vehicle, they can send diagnostics to the system with high baud rates which can cause a crash to the car's CAN and stop the systems from working. This could cause your vehicle's engine to stop or lock up.

No additional key fobs or Ghost 2 Immobiliser remotes are required.

The car immobiliser is an excellent piece of anti-theft technology utilized by millions of modern vehicles across the globe. Using engine ECU software to prevent cars from starting if a false transponder signal is sent to it, an aftermarket immobiliser is an excellent way to safeguard your vehicle.

However, it is easy for a thief to bypass an immobiliser system when they have access to the code that allows them to disable it. The battery in most key fobs can be removed by prying it open which means that a burglar could make use of a simple tool to remove the immobiliser's internal circuit board and replace it with a blank. They'll then be able to start your car.

With the TASSA approved Ghost 2 immobiliser, there are no additional keys or remotes required. The immobiliser connects directly to the vehicle's ECU (Engine Control Unit). This is accomplished via a discrete, quiet data loop in CAN that cannot be detected by diagnostic tools, such as those used by high-tech thieves. It doesn't come with a traditional keyfob that has an LED indicators, so it's inaccessible.

There will be times that you must deactivate Autowatch Ghost 2's automatic security, for example during a valet parking or servicing. The ghost CAN immobiliser has a dedicated mode for this, called "Service Mode that can be activated with just a push of an app on your smartphone. The car is still operated however the maximum speed is restricted to 36 mph for added security.

Contact us today to arrange a demonstration at our workshop. A member of our team will explain the process and will give you a Ghost 2 emergency card, installation certificate, and security guarantee.

Simple Change of PIN Code

Ghost is the latest generation of device that secures your vehicle without cutting wires or installing key fobs from an aftermarket. It connects directly with the vehicle's CAN data network. A personalised PIN is created using buttons on the steering wheel and dash. The system stops engine start and can't be re-enabled since there are no RF signals emitted from the device. This makes it impossible to be detected using sophisticated RF scanning and code grabbing technologies employed by modern thieves.

The PIN code is able to be changed to lock out earlier drivers or include an override code in case you forget the sequence. During installation, the installer will demonstrate how to do this. The system has a valet-mode feature that allows you to temporarily disable pin input sequences so that your mechanic or garage can service the vehicle without knowing the code. This is great for customers who wish to surrender their car for valet parking or service, but don't want divulge the pin sequence.

Ghost is a discrete system that uses the buttons on your car to create an unique and interchangeable PIN sequence. This sequence is entered through the app on your smartphone. No extra LED indicators are thrown, and your car is secured without chance of being disabled.

Tested for each vehicle

Unlike key fobs that require you to press buttons the ghost immobiliser is discretely placed under your dash or steering wheel so that only you know it's even there. The device is connected to the car's CAN data networks and a personalised PIN code is programmed into it using buttons that are already present on your vehicle. The system won't permit your car to start until this code is entered. This means that thieves cannot copy the keys to your vehicle or gain access to the OBD to hack into it.

Ghost is a great option for all vehicles, including electric cars motorhomes, vans, motorhomes and bicycles. It's also extremely versatile and can be set to deactivate under different circumstances. It is possible to program it to enter Valet mode, for example when the vehicle is transferred to a valet service or parking company. This means that your car can be operated within a set 30mph speed limit and the ghost immobiliser will activate itself when it is returned to your home.

The device can be reset at any time to your personal PIN number. This is great if you lose the code or if the device becomes unusable.

It's also important to note that the device is undetectable to anyone who isn't familiar with it. It works by running through existing buttons on the dashboard of your car and on the steering wheel, and uses the data they send to recognise the button that was hit. This makes it a secure and reliable security option that cannot be compromised by jamming, RF scanning or door lock pick sets.