Peugeot 308 Key Fob Problems and How to Fix Them

If your Peugeot 308 key fob stopped working after a few days, it could be due to a dead battery in the coin or water damage and Peugeot 208 Key replacement receiver module issues or a defective electronic chip. These are all easy solutions that will bring your car back to speed in no time!

Car keys can also get damaged due to the blade getting worn. It is easy to solve this issue by visiting your local Car Key Man Auto Locksmith to have a new blade fitted.

Battery

The key fob battery in your Peugeot 308 can sometimes die or become weak enough to send an energizing signal to the car. The key fob might cease to function and stop you from locking or unlocking your doors, or starting the engine. To fix this issue, you'll need to replace the battery inside the key fob.

You'll need to purchase a new battery from an auto parts store or a local hardware store. When you purchase the battery, ensure that it's new and hasn't been on the shelf for a long time. A brand peugeot 208 key replacement new battery will have greater capacity and will be able to send a more powerful signal to the car.

After replacing the battery, try unlocking and locking the doors of your peugeot car key replacement cost by using the key fob. If the doors do not unlock, the problem is likely in the car's receiver module that can be reset by your local Peugeot dealer.

It's also possible that the chip inside your key fob is damaged. It's possible to harm your key fob if you drop it on the ground, or expose it to water. The rubber seals that protect the chip from moisture could get worn out over time, particularly if your key fob is exposed to water for long period of time, like when you submerge it in the ocean at the beach. To prevent this from happening, you must keep your key fob free from moisture and not let it come into contact with water.

Water Damage

If your key fob is wet, regardless of whether you dropped it in the pool or fumbled it into a puddle, don't assume it's a case of lost cause. While the key fob has rubber seals to protect it from water, long-term exposure to water could cause damage to its electronic chip. Since water is such a good conductor and conductor, any water that gets inside the key fob will cause a series of short circuits which will eventually destroy the chip. After taking the battery out, clean its contacts with isopropyl alcohol, and dry it completely before putting it back in.

A dead battery may be the reason that your Peugeot 308 won't start. If you have an extra car, jumper cables can be used to start the engine again. If the battery is causing the problem the battery will need to be replaced.

A malfunctioning receiver in the car could also block it from receiving the signal from the keyfob. The key fob may be damaged, or there could be an issue with the antenna, wiring or the key fob itself. It is possible to program a new keyfob to your vehicle if using one. If you are unable to solve the issue, you should contact a professional technician. A trained technician will be able find the issue quickly and fix it immediately.

Radio Interference

Symptoms such as key fobs not being recognized or having a limited range usually indicate that there is a problem with the system. The interference could be radiated or transmitted, the latter being caused by power and speaker cables getting too close to electrical components. Generally speaking, rerouting cables or moving them away from these components could solve the issue.

It's unlikely that anyone is listening in on the key fob's signals to steal your car, however it is possible that the signal has been masked by radio frequency interference. This is a simple issue to fix.

If your key fob is not being recognized by the system, you can try replacing the battery. Make sure that the battery is the right size and type. If the battery is not properly sized, it could damage the fob.

These devices could interfere with the key signal, if they utilize the same radio frequency. Do not connect these devices to your key fob.

Pairing Issues

A car's remote keyless entry system includes an antenna that receives radio frequency signals from the key fob. You will not be able start your car if this receiver is malfunctioning even if the key fob is working and is reprogrammable. The issue can be caused in a number of ways, such as the battery of the coin-cell being dead or water damage. The receiver could also be faulty due to a software error or internal damage in the key.

The battery for your coin in your Peugeot 208 Key replacement 308 keyfob has likely gone out of service. It is easy to replace it by using a fresh battery, however, it is essential to select the correct battery for your key fob. It is best to use a battery that is the same size as well as voltage and specifications as the original.

Your Peugeot 308 keyfob may not work if it is linked to an unrelated vehicle. It is possible that you have accidentally given the key fob to a friend or it was used to unlock other vehicles. You can fix this by reprogramming the key fob with an OBDII scanner. The tool will ask you for information about your car, including its VIN or engine type. It is crucial to enter the correct details.