Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are easy to maintain, durable and long-lasting. They do not get rotten or rusty like aluminum or timber.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will help avoid unnecessary repair costs and increase energy efficiency.

1. Broken Glass

The broken glass in your windows can cause significant damage to your home, and could even be fatal. It is essential to take the time to make sure that you are doing everything you can to ensure that your windows are in good repair.

For single pane windows it is relatively easy to replace them, and the new window will generally fit within the frame that was previously installed easily. If you have double-paned windows that are joined by internal beading, it is harder to remove and replace the old panes. In this case, you will need to locate some plastic spacers that will assist the new pane to fit perfectly into the frame of the window.

Wearing eye protection and thick gloves is a must if you plan to remove the glass by yourself. It is also an excellent idea to lay down a drop cloth prior to when you start working on the glass to ensure that any shards will fall onto the cloth rather than on the floor, where they could be trampled upon and cause further damage.

After the glass has been removed from the window, it's best to cover the gap with clear packaging tape or duct tape to block water and drafts from getting into the property until a professional comes out and repair the window. This also serves as a barrier to prevent any criminals from getting into your home. If the distance between the window and the door is substantial, you may prefer security screens that has windows. This will give you the best of both.

2. Sagging

uPVC is durable energy-efficient, cost-effective and economical alternative to timber sash windows. As time passes, they may be affected by a variety of issues that include sagging. A sagging uPVC window could cause issues with light, Upvc Window Repair draughts and even security. It's crucial to act immediately if you notice your uPVC windows are falling down.

To repair a window that is sagging, you can try repositioning the hinges. To accomplish this, you'll have to open the window to get to the frame. Then, remove both the hinges on the top and bottom with a screwdriver and adjust them counter-clockwise or clockwise. After you've repositioned the hinges, close the window and check for an appropriate fit. If you're satisfied with the fit, you can tighten the screws to ensure that they stay in position.

If you aren't able to move the hinges, you may need to replace the seal. Over time rubber seals can lose their elasticity and dry out which causes their tightness to decrease. If this happens, it's essential to replace the seal as fast as you can to ensure that your upvc window repair near me windows are watertight and draught-proof.

UPVC handles can also loosen. Often this is due to screws that have become loose over time. However, it can also happen because the handle mechanism has worn out. It's fairly simple to fix a loose uPVC hand. You'll first need to close the window and then perform an experiment fitting. The corner joints of the sash must be aligned with the casing joint. If it does not then you can use the screwdriver to loosen up the handle. Then turn the mechanism to position.

3. Water Leaks

It is essential to take action if you get up each morning to discover mouldy walls and wet floors. Leaks of water from windows can cause structural damage to your home and also impact your ability to regulate the temperature inside your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

This is a relatively easy fix that can be completed by any competent DIYer. Depending on the severity of the problem the caulking that was used up might need to be removed before a new layer of caulk can be applied. It is crucial to keep in mind that when it comes to uPVC window repairs you should avoid the temptation to "over-caulk and then make the area more difficult to clean and reduce your energy efficiency.

It is crucial to make sure that the drainage holes are free of debris and that the sill pan is angled correctly so that it drains away from the window. In more serious cases you might have to consider replacing the window.

Other indicators of water leakage are decayed sills and the appearance of black spots of mold on the wall near the window. This fungus thrives in damp conditions and can quickly spread across the home.

If the leakage is occurring between the double-glazed window, it is more likely the problem is related to the seal, not the frame. A upvc window repair specialist can easily solve this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and open with ease it could be the hinges that are at fault. They can be replaced by any competent DIYer and can usually be completed in a matter of minutes.

Like any mechanical part hinges are prone to be damaged over time. The process of replacing a hinge on a window is an easy process, but it's easier with someone else to assist in holding the frame up.

Make sure that the uPVC hinges open and close in the proper direction. This can be done by looking for the arrows on each hinge, this shows which way the window should be opened.

The problem can be caused by opening the window improperly or by a poor installation at the factory. It is usually possible to fix the issue by sending us a picture via our website and we will be pleased to offer you advice.

Regularly lubricating the hinges is also necessary. This can be accomplished by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can allow the window operate and close more easily. It can also reduce the risk of a window sticking and prevent corrosion. Ideally, you should perform this every year. WD40 or other solvent-based oils should not be used since they could damage your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by a variety of different things. The hinges can also be disaligned as a result of wear, which can cause gaps where the sash and frame meet. They can be repaired by giving them a good cleaning, but when they're beyond repair, it may be necessary to get them re-aligned or replaced. The second is the interlock, which is located on the hinge side of the window, can be misaligned. Again, it's possible to just give them a clean but in some instances it could be necessary to have them replaced.

The next common reason for draughts is window seals, these can become worn down or damaged over time and let air escape through the gaps. Installing high-quality weatherstripping is a good way to stop draughts. Replace the windows made of Upvc with low-emissivity glass. This will help to regulate indoor temperatures and lessen the possibility of draughts.

One of the most effective methods to reduce draughts is by using a draught excluder, these are typically fabric tubes that are filled with some type of filler. They can be positioned on top of your windowsill. They will keep your home warm by blocking out cold air.

With a little maintenance and repairs your windows made of upvc will provide excellent insulation and security for your home. It is crucial to keep in mind that all windows eventually get worn out and it may be cheaper to replace them instead of fixing them. If you are experiencing issues with your window made of upvc you should consult a professional as soon as possible.