How to Replace a Nissan Juke Spare Key

Nissan Juke is an attractive and fun hatchback with distinctive engine configuration. It can be a bit noisy, but it's still enjoyable to drive.

The battery that powers the key fob on the Nissan Juke must be replaced every two years or more, or if the battery is low. It's easy to do at home, but you'll need a few tools.

Dead Coin Battery

If your Nissan Juke key fob has stopped working the first thing to check is the coin battery within it. It could be dead and require to be replaced, which is a straightforward fix that only takes about a couple of minutes. You can do this by flipping the fob upside down and accessing the tiny latch/release at the back. Remove the battery that was in use and then replace it with an alternative one, making sure that it's facing downwards in the fob. Line up the two halves of the fob carefully.

If the fob was exposed to water, it will need to be cleaned prior to putting the new battery in. It is possible to clean the fob using isopropyl or electronic cleaner, and paper towels. Then let it dry completely prior to installing the battery.

To start the car the key fob needs to be paired with the car. This can be accomplished according to the instructions in your owner's guide or an OBDII scan. If the key fob is not been paired, this is the most likely cause of why it isn't working. A defective chip inside the fob could cause it to stop working however this is not a common occurrence. In this case, nissan juke Key fob a new receiver module may be required. If this is the situation the receiver module will need to be replaced by an experienced technician.

Water Damage

The key fob is powered by a battery, and these batteries should be replaced every two years or more, or at the first sign of your car not responding when you press the "start" button. The keys' rubber seals protect them from water, however submerging a key fob into ocean or pool water can cause damage to the electronic chip. If this is the situation you'll need to obtain a new key from Nissan or an automotive locksmith.

If the key fob has an active chip it's possible that the computer has lost connection to it, and this could occur for a variety of reasons. It can be fixed by restarting the car. If the "Key ID error" message still appears then you must contact Nissan for assistance.

Three common causes are battery that is dead on the key fob or a key that's not programmed, and damaged key fob that is damaged. The first two are relatively simple to fix while the third is more difficult to pinpoint and repair immediately but is fixable with patience. WhoCanFixMyCar lets you compare Nissan Key replacement key for nissan micra prices in your local area and schedule your repair. You can read customer reviews about local Nissan dealerships, Nissan mechanics, and garages in a matter of minutes.

Faulty Chip

The key fob on your Nissan Juke contains a special chip that transmits a signal to the vehicle every time you turn it. The key may be inoperable if the chip is faulty. In this situation, you can only solve the issue by replacing the key. There are a variety of reasons your Nissan Juke's key may be defective, such as water damage or a dead coin battery or a damaged receiver module.

If your key fob stops working after a soak in the wash or even a bath, you need to check the chip for water damage. Make sure the metal clips that hold it in place are secure and that the chip is not exposed to any water. If you notice any indications of water damage, try taking off the battery and cleaning the electronic component using isopropyl alcohol or electronic cleaner.

If the chip is defective If the chip is defective, you'll need to call your local locksmith or dealer. They will require the year as well as the model, make and year of your vehicle in order to locate an appropriate replacement. You will also have to write down your VIN (Vehicle ID Number) so the dealer or locksmith can know exactly the key you have. This will allow them to verify the correct key code and ensure they are cutting the correct key.

Faulty Receiver Module

The key fob sends out a radio signal to your vehicle that performs various functions. It can unlock the trunk as you hurry to your car with groceries or start your car by pressing the button on the fob. It can also open your windows and turn the horn on in the event that you lock the keys in your car.

If the key fob ceases working, it could be a problem with the receiver module within the vehicle. The receiver modules are tuned to receive specific frequencies that correspond with the signals sent by the Nissan key fob. A faulty receiver module will stop your car from responding to the signal sent by the key fob of Nissan.

It is always an excellent idea to have a spare Nissan key fob in case your original key gets lost or breaks. A spare key can be programmed by a locksmith or dealership to work with your Nissan and can help you avoid the anxiety of locking your keys inside your car or losing them.

If your Nissan Juke key fob was exposed to clean tap water or rain the issue can be solved by cleaning it with isopropyl alcohol or an electronic cleaner. However, if the chip is damaged then you'll need purchase a new key fob that can be assigned to your vehicle by a locksmith dealer.