Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are easy to maintain and durable, as well as long-lasting. They do not decay or rust as aluminum and upvc window Repairs timber.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will reduce repair costs as well as improve energy efficiency.

1. Broken Glass

If the glass in your window is broken it could cause a large amount of damage to your home, making it very dangerous and potentially fatal. It is essential to make sure that your windows are in good condition.

Single-pane windows are relatively easy to replace and will usually fit into the frames that were previously in use very easily. If you have double-paned windows which are joined by internal beading, it will be harder to remove and replace the panes that were previously in use. In this situation you'll need source some plastic spacers to aid the new pane in being able to fit correctly into the frame of the window.

Wearing eye protection and heavy gloves is essential if you plan to remove the glass by yourself. It is also recommended to lay down a drop cloth prior to when you begin working on the glass, so that any shards fall onto the cloth instead of onto the floor where they can be trodden under and cause further damage.

Once the glass is removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to block water and drafts from entering the property until a professional can come out and fix the window. This also serves as a barrier to prevent any intruders from getting into your home. If the gap between the door and the window is significant, you may need to consider security screens that includes a window. This will provide the best of both.

2. Sagging

Upvc is a long-lasting and energy efficient alternative to timber sash window. However, with time, they are susceptible to a range of issues like sagging. A window that isn't properly aligned can cause problems with light, draughts and even security. It's crucial to act as soon as you notice your uPVC windows are sliding.

Repositioning the hinges can help fix a window that is sliding. To do this, you'll need open the window to get to the frame. After that, using a screwdriver, you can unscrew the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've repositioned the hinges, shut your window and check for fit. If you are happy with the fit of the window, you can tighten screws to hold them in the right position.

If you aren't able to move the hinges, you may need to replace the seal. Rubber seals may dry out and lose their elasticity with time, which causes them to loosen. If this happens, it's essential to replace the seal as soon as possible to ensure your uPVC windows are waterproof and secure from draughts.

UPVC handles can also loosen. The majority of the time this is due to screws that have come loose over time. However, it can also happen because the handle mechanism has worn out. It's relatively simple to fix a loose uPVC hand. First, you'll need to close the window and then perform a test fitting. The corner joints of the sash must be aligned with the casing joint. If it doesn't, you can use a screwdriver to loosen the handle, and then reverse the mechanism back into its original position.

3. Water Leaks

It is essential to take action if get up each morning to discover mouldy walls and wet floors. Water leaks through windows can cause structural damage to your home and impact your ability to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is a fairly simple fix and should be undertaken by any skilled DIYer. Depending on how severe the problem is, the old caulking may have to be removed. It is essential to remember that when it comes to uPVC window repairs you should not be tempted to apply too much caulk in order to make the area more difficult to clean and could reduce your energy efficiency.

Make sure that the drainage holes are free of debris in them and ensure that the sill pan has been properly angled to drain away from the window. In more extreme instances, you may need to replace the window.

Mold spots and rotted sills are other signs of water leakage. This fungus thrives in humid conditions and can propagate quickly throughout the house.

If the leakage occurs between the double-glazed window, it is more likely the problem is with the seal rather than the frame. A uPVC specialist can easily solve this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be the reason when your uPVC window is difficult to open or it opens in an ease. These are easily repaired by any DIYer who is skilled and can be completed in just a few minutes.

Nearly every home in the UK will have top-hung or side hung upvc window repairs near me windows that use hinges and, just like any mechanical component they can wear down over time. It is an easy process, uPVC window repairs but it's easier when you have a person to assist in holding the frame in place.

Verify that the uPVC hinges open and close in the proper direction. You can check this by checking for the arrows on each hinge, this indicates the direction in which the window repairs should open.

The problem can be caused by opening the window improperly or a faulty installation at the factory. Sending us a photo via our website is often enough to resolve the problem. We are always happy to give advice.

It is also essential to ensure that the hinges are lubricated regularly. This can be done by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can allow the window to operate and close more easily. It can also lower the risk of a window sticking and prevent corrosion. This must be done at a minimum every year. WD40 and other solvent-based fluids are not recommended since they could damage parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by different factors. First, the hinges due to wear and tear can become misaligned, this can cause an opening to appear between the sash and the frame. This can be easily fixed by giving them a thorough clean, however when they're beyond repair, it may be necessary to get them re-aligned or replaced. Second, the interlock can be unbalanced. This is located on the hinge's side, and could require to be cleaned. In some instances, it may be necessary to replace these.

The next most common cause of draughts is the window seals, these are susceptible to being worn out or damaged over time, and let air escape through the gaps. Replacement of these with high-quality weatherstripping will help to keep draughts at bay. Replace the windows made of upvc with low-emissivity lenses. This will help regulate indoor temperatures and lessen the risk of draughts.

Another method of reducing the amount of draughts is to use a draught-excluder. These are typically fabric tubes filled with a filler, which can be hung over your window sill. These will help to keep cold air out and keep your home warm and cosy!

Your windows made of upvc will continue to provide excellent insulation and security for your home by performing regular maintenance and repairs. It is crucial to keep in mind that all windows eventually wear out and it may be cheaper to replace them rather than repair them. If you are having issues with your upvc windows, it is always best to seek professional assistance as soon as you can.