How to Replace the Replacement Key Battery For the saab key fob programming 9-3

Saab owners have a unique set of steps to add the second key. It requires dealer support using an electronic handheld computer called Tech-2. Then the transponder must be replaced and a key need to be purchased.

It is an excellent idea to rotate your keys so that one does not get damaged faster than the other. This will also help keep your keys in good condition.

Replacement Case

In contrast to the traditional Saab keys of old keys, the new key fobs have electronics inside which makes it difficult to copy. This has made theft of cars significantly more difficult than 20 years ago. However, it has also made replacing lost keys a more expensive undertaking.

Saab 9-3 owners should have two keys that work. If one gets lost, it costs a lot to replace it in the car because it involves replacing the CIM module and programming the locking cylinders. Dealers charge between $100-$200 to do this.

There are ways to avoid these costs. Some parts suppliers will use the code of an old key to cut a brand new metal blade at a fraction that of a dealer. The key, however, saab Keys must be the same as the original one in order to function in your vehicle.

You can also replace the case yourself by following these steps. You'll require a flathead screwdriver along with some patience. With the screwdriver, slowly break the plastic and then separate the emergency key from the case. Once you have the case open, remove the electronics and place them into the new case. Be sure to put the correct badge and key back in the case too.

Replacement Battery

The Saab 9-3 replacement battery is a low-cost part that can be easily and quickly replaced. This YouTube video by Cyclone Cyd demonstrates how to replace the battery of the remote fob with only four steps. This tutorial should work with any modern Saab key fob. However, the procedure might differ slightly.

This button is usually placed close to the Saab logo on the back of the fob. It's usually close to the Saab logo on the back of the fob. Use a flathead screwdriver to insert the screwdriver in the small hole in this button. This will allow you to open the fob's case so that you can replace the battery.

Once the new CR1632 battery is installed You can then reassemble the remote key fob, and then program it to your car. The entire process shouldn't be more than an hour. It's a simple process that doesn't require any special tools.

The process is more complicated if you lose the key, but it's possible. The dealer must read the car's VIN and then purchase a replacement key blade and a TWICE module with the proper unique code. After that, they'll have to cut the new key and then program it using the latest software tool known as MDI.

Replacement Key Fob

The key fob is the part that locks and unlocks your car. It has an internal battery. They have a limited life span and eventually die. This is a problem that happens with all cars and the good thing is that you can replace the batteries on most key fobs without replacing the entire case. You can purchase fobs replacements on Amazon that come with all the electronics already installed, which means you can just pop open the case and replace the old batteries. It is important to remember that you'll need remove the emergency key first. you can do this by putting the small screwdriver flathead into the slot located in the middle of the case. The case will split as you move the screwdriver around it.

If you're about to replace the keys ensure that you have a spare because this can cut down the total cost by a significant amount. If you have a spare, you can have the dealer cut the new key and program it into your car, which is much cheaper than replacing the entire key fob.

If you do not have a spare key you can add a second key to your car, but this requires a lot research and effort. It can cost a few hundred dollars to add an additional car key. The computer of the car also needs to be programmed. Professionals can do this but it's not a cheap option.

Replacement Ignition

The latest SAAB 9-3 uses an advanced alarm system built on a keycode. This means that when you lose your sole functioning key, getting an additional one could be extremely expensive because the car needs to have a computer module added and it also must be specially programmed to accept a new key. Most locksmiths can't do this or even a dealer will charge several hundred dollars just to program the new key!

If you've lost the only working key, a dealer will repair your car's computer (known as the CIM or saab key battery replacement TWICE) in order to make the replacement, and will charge you a premium price for it. We can reprogram the existing EEPROM of your car's computer so that it is ready for an extra key. This will save you more than 50% off the cost you have to pay a dealer.

If you've been a long time owner of a 03-11 SAAB 9-3, you likely realize that the ignition key isn't really all that durable. If the ignition key you have isn't working properly, you should consider replacing it. They can become sticky and the buttons are known to fall off. It's good to know that replacing the ignition key isn't as difficult as it seems, and it is fairly easy to do with the right tools.