how to find a lost kia Key fob to Replace a Kia Sportage Replacement Key

The key in many Kia models has an entry system that is keyless into. This key is similar to an remote control, and is exchangeable by an Kia dealer.

Key fobs may stop working due to a number of reasons, including the battery being dead, worn-out buttons signal interference or water damage. Here are some tips to help you get your Kia sportage replacement key to work again.

How to replace the remote key or smart key

Whether your Kia is equipped with an intelligent key, remote key, push to start key or a regular non-transponder metal key the battery in these keys will eventually require replacement. This is especially relevant if your car displays a message telling that the smart key or remote is not powered by the battery.

This is a relatively simple process. In order to replace the battery of the key fob, remove the mechanical key from the slit in the back of the key fob. You then need to lift the cover. A small screw is in the key fob to hold the battery in place. Remove the old battery by unwinding the screw using the help of a small screwdriver. Install the new battery and then close the opening on the key fob.

When the key fob is equipped with an updated battery check it by pressing the locks and unlock buttons. You're in good shape if the doors lock and unlock as you expect. You can now make use of Kia's hands-free lock/unlock function when your fingers are cold or you have to do some errands in Brandon.

Note: Certain key fobs (transponder chip or [Redirect-302] smart keys) might require their programming completed. This requires a particular programming machine that only the dealer or locksmith can access. Other keys (non-transponder metal keys) do not require programming. If your key has to be programmed, you must know the key code number that is stamped on the key code tag and save it in a safe place.

How do I replace the battery?

If the 2011 kia soul key fob replacement key fob doesn't respond when you press the lock/unlock button, it is most likely that the battery is insufficient. A weak battery could cause other issues, such as the check engine light flashing or the engine not turning properly. Fortunately replacing the key fob battery is a relatively easy DIY project that requires just a few basic tools.

Be sure to turn off your vehicle and close the doors before you begin. Find the small metal or plastic piece that is located at the bottom of the key fob. Press it until the key pops out. The key can be put into the driver door handle to unlock your car.

To replace the battery on the key fob, you must remove the cover on the rear. Utilize a plastic plier tool to loosen the latch that holds the black negative cable. Remove the old battery and align the new battery to ensure that the "+" positive side is facing you, and the "negative" negative side is facing towards the fob's metallic electrical contacts. Avoid using too much force when pushing the new CR2032 into place to avoid damage or bending the metal contacts.

Once the new battery has been installed then turn the key fob off and then on in the ignition repeatedly until the door locks cycle. Then, test your Kia key fob and see if it is working properly again.

How do you replace a keyless key

You may have either a standard keyfob or a Smart Key based upon the model of Kia Sportage. The difference between the two is that the smart key comes with the small blade of a key hidden within it, whereas the standard fob isn't equipped with. Both key fobs come with batteries that will eventually require replacement. It is a simple process that takes less than two minutes.

Make sure to shut off your Kia and be on a flat, well-lit surface before you begin. Remember that the fob is made up of tiny parts that could be thrown off if you're not careful.

The first step is to find the small release button that is located on the backside of the fob. It could be a circular button or rectangular slot. You can open the key fob by pressing the button.

Once you have the key fob opened then you can take off the old battery and replace it. The new battery is a CR-2032 that can be purchased online or at your local auto parts store. When you are done, you should be able to lock, unlock and start your vehicle using your key fob, even if your engine isn't running!

How do you replace a mechanical key

The Kia keyfob can be a fantastic convenience which allows us to lock or unlock our car with just pressing the button. Like any device that is used, the Kia key fob might have issues. Luckily, there are steps that can be taken to fix these issues and keep our key fobs in good working condition for the long term.

A dead or weak battery is one of the most common issues. This can cause the fob to stop working altogether or to work intermittently. If this is what you are experiencing, replace the battery with a new one.

If this does not solve the issue, use a flathead screwdriver standard to push the fob's casing made of plastic open. Be careful not to harm any internal components or scratch the plastic. Once open, carefully remove the old battery and replace it with a brand new one.

After the new battery has been put in, close and then open the doors using the mechanical key (every Kia fob comes with an emergency mechanical key that will fit in the slot). Test the key fob and check that it's functioning correctly. If the fob isn't working, call an expert locksmith or [Redirect-301] dealer to resolve the problem. To avoid future lockouts, ensure you purchase an emergency key that will work in all of the trunk and door cylinders.