Peugeot 308 Key Fob Problems and How to Fix Them

If your Peugeot 308 key fob stopped functioning one day it could be due to a dead battery in the coin, water damage the receiver module or Peugeot 308 Key Fob a damaged electronic chip. These are all easy fixes and you can get your car back to speed in no time!

Car keys can also fail because the blade of the key gets worn. You can easily fix the issue by visiting your local Car Key Man Auto Locksmith to get a new blade installed.

Battery

The key fob on your Peugeot 308 may die or become weak enough to not send a clear signal. This can cause the key fob to stop functioning, preventing you from locking or opening the doors or starting your engine. You'll require a new battery for your key fob to correct this.

You'll have to purchase the replacement key for peugeot partner van battery from an auto parts store or your local hardware store. When you purchase the battery, make sure that it's brand new and hasn't sat on the shelf for too long. A brand new battery is more capacity and will send a stronger signal to your vehicle.

After replacing the battery Try locking and unlocking the doors of your Peugeot using the key fob. If the doors won't open, the problem is likely in the car's receiver module that can be reset by your local Peugeot dealer.

It's also possible that the key fob's internal chip is damaged. This could happen if you drop your key fob on the ground or expose it to water. The rubber seals that shield the chip from moisture may become worn down over time especially if your key fob is exposed to water for extended periods of time like submerging it in the ocean at the beach. To stop this from happening, it's important to keep your key fob safe from water and never let it come in contact with water.

Water Damage

Don't let go of your key fob when it gets wet, whether you slipped into the pool or stumbled into a puddle. Although the key fob is equipped with rubber seals to protect it from water, prolonged exposure to water could result in damage to its electronic chip. Water is a great conductor and any water that enters the key fob can cause short circuits in series, which will eventually ruin the electronic chip. After removing the battery clean the contacts with isopropyl Alcohol and dry it off completely before putting it back into.

A dead battery can also be the reason your Peugeot 308 won't start. Jumper cables are an excellent method to start the engine if you own an additional car. If the battery is defective the battery must be replaced.

Another reason could be a bad receiver in the vehicle, which may block the signal from the key fob. It could be due to a problem with the antenna or wiring or the key fob may be damaged. It may be necessary to program a new keyfob for your vehicle if you are using one. If you are unable solve the issue, you should contact an expert technician. A skilled technician will be able to diagnose the problem quickly and resolve it in a timely manner.

Radio Interference

Interference can result in problems such as a key fob that's not being recognized or has a limited range. It is either radiated or conducted, with the former being caused by power supply cables and speakers wiring that are too close to electrical components. Generally speaking, rerouting cables or moving them away from the components may solve the issue.

It's unlikely that someone is listening to your key fob's signal in attempt to steal your vehicle or vehicle, but it's possible that radio interference has slowed the signal. Fortunately, this issue is simple to fix.

If your key fob isn't being recognized by the system, you can try replacing the battery. Also, ensure that the battery you are using is the correct size and type. A wrongly sized battery can cause damage to the fob.

These devices can interfere with the key signal, if they utilize the same radio frequency. It is advised to avoid using these devices with your key fob.

Pairing Issues

The remote keyless entry system includes an antenna that receives radio frequency signals from the key fob. You will not be able start your vehicle if this receiver is malfunctioning, even if your key fob is in good working order and is reprogrammable. This problem can be caused by a variety of ways, such as a dead coin-cell battery or water damage. The receiver may also be malfunctioning due to a software glitch or internal damage to the key.

The battery for your coin in your Peugeot 308 keyfob has likely failed. It is possible to replace it with a brand new battery but it's essential to select the correct battery for your key fob. It is recommended to use an item that has the same size in terms of voltage, size, and specifications as the original.

Your peugeot 207 car key 308 keyfob may not work if it is paired with an unrelated vehicle. It is possible that you have accidentally given the key fob to someone else or the key was used to unlock other vehicles. This can be solved by reprogramming your key fob using an OBDII scan. This tool typically asks you for certain information about your vehicle, like the VIN or engine type, so it's important to enter this correctly.