How to Repair a Saab 93 Key Fob

The key fob of your Saab 9-3 could have a defective chip. The metal component of classic car keys was easy to duplicate, however, modern key fobs feature an immobilizer feature to protect your vehicle.

To determine why your key fob isn't working and fix the issue, replace the battery in the coin. This is a cheap and easy fix.

How do I program the Saab 93 key fob

Saab keys 93 allow you to control the doors, trunk and engine of your vehicle. They can also unlock the fuel door as well as activate a panic button. Remotes can also be programmed using the car's transmitter. Put the key in the ignition and switch it ON. Follow the prompts on the Tech2 until you have programmed all the keys that you want to work with the vehicle.

New Saabs come with two keys, whereas the used ones typically have only one. You can add another key by re-installing the transmitter (which includes the transponder) and programming it in using a handheld computer dubbed Tech-2 Tech-2 at your Saab dealer. It will also require a new key to match the old one in order for it to function. This can be costly however it's cheaper than replacing the entire CIM system and locking cylinders should you lose the sole key that works.

Saab 93 key fob replacement

Saab owners who have lost their only key should acquire a second one as soon as they can. The key fob is not like the metal keys used in automobiles 20 years ago. It is an electronic device that communicates with the car through a specific chip. This is what helps the car recognize the key fob as well as prevent it from being copied. Dealers can do this however it can be expensive. It is recommended to avoid this issue by getting an alternate Saab key from an online retailer.

The main reason for having an additional key is to make your car safer if you should lose it. The thief is more likely find a spare key than a stolen one. Most thieves do not have the equipment necessary to copy these modern keys. They would need a specialized machine to do so but that's not a guaranteed method of protecting your car from theft.

A spare key will also save you money when replacing the saab keys replacement 9-3 remote's battery. Every electronic unit in the keyfob contain batteries, and eventually, they'll fail. It is simple to change the battery, but you must be careful to not to damage the electronics within the case. You can watch videos on Youtube to learn the best way to do this job, such as the Cyclone Cyd videos.

Saab 93 key fob battery

If you've been struggling with an infrequent response from your key fob, Saab 93 Key chances are it's time to replace the battery. While there could be other causes for the delay but a dead battery is the most likely cause. This is a cost-effective and simple solution, so don't hesitate.

To remove the backup key, first take off the fob. To do this, push firmly on the Saab Logo and pull it off the key ring loop. Put a flathead Phillips screwdriver through the indentation in the key fob case. To remove the case, twist the screwdriver. It shouldn't require much effort, but be careful not to scratch the plastic.

When the case is opened, you can see the electronic components inside. The circuit board is connected to the metal retaining clips. If they are rusty or dirty, the fob will not work properly. Clean them with rubbing alcohol. This is a temporary solution. The clips will eventually wear out and require to be replaced.

Before you replace the battery, make sure to test the car door locks using your backup remote. If your backup remote works, then the problem is most likely with your main key fob. Replacing the battery should resolve the issue, but if still experiencing delays when you lock or unlock your doors, it's a sign that something else is wrong with your car.

Saab key fob case 93

A new case is available when your key fob appears old and worn. They are easily accessible on the internet and can be easily connected to your existing remote. All you need is a flathead, and a little patience. Put the flathead screwdriver in the slot at the middle of the case, and gently split it open. Make sure you don't damage the limiters holding the battery in place. The new case will be installed in the existing electronics after taking out the emergency badge and key. It won't require any programming.

The most effective key fob cover has a special lining that stops signals from being sent to the key fob. This is essential, since it's the signals that enable your vehicle to start. Some of these cases are made with silver layers, while others are made from copper to distort transmissions more effectively.

Key fob covers are also a great option to shield your keys from being damaged. It can help you keep track of your key fob and help you locate it in the dark on the way to your vehicle. A quality key fob case will safeguard your keys from theft, and it will also add a touch of fashion to your keychain.