Double Glazing Door Lock Repairs

Have your uPVC window or door mechanism started to fail? Maybe the handles on your uPVC windows and doors are not aligned properly or are difficult to use.

You will lose energy when your double-glazed doors do not perform as they should. This increases the risk of burglary. Owen the Locksmith will be able to repair your door lock at a reasonable cost.

Snapped Key

If a key is snapped off in the lock, it can be incredibly difficult. It can also be a security risk in that it can expose you to an intruder if the door does not lock. There are a few easy fixes you can try to repair the issue and make your door functional again.

The first step is to remain calm. If you panic, you could end up pushing the damaged key piece further into the lock.

Then spray WD-40 or a different penetrating oil into the lock to make the broken piece slip out more easily. You can also make use of a screwdriver to break up any pieces stuck that could be hindering the flow. If you happen to have a bit of the key hanging out, you can make use of a paperclip or other metal object that is thin to grab it and pull it out. Both methods are effective, but you need to be careful not to push the broken key further into the keyway.

Some paperclips have grooved edges, which can be used as a hook extractor, and some jigsaw blades are also suitable for this function. If you don't have any of these available, you can use needle-nose pliers to bend and create hooks. You can also use a pair of tweezers grab and pull out the last piece of broken keys.

If you are unable remove the broken key piece, use a lock deicer. It's usually available at most hardware stores, and it works by freezing any moisture or ice that might be in the lock.

If none of these strategies are working you, it's time to call locksmith. The experts at Fitlocks can quickly solve problems with uPVC door mechanisms and double glazing repair locks that have snapped keys as well as broken handles. They can also modify your double glazing door mechanisms to make them easier to operate. Book a double glazing repair with us online, or give us a call to discuss your needs.

Broken Cylinder

A damaged cylinder can pose an immediate security risk. A locksmith professional can fix the cylinder. To fix the cylinder, a locksmith will need to tap it. This can be accomplished with a hammer or other tool. However, the most effective method is to employ a wire or long match. Place the match or wire end near the keyway. The locksmith can then strike the lock to break it. This is much better than using a heavy hammer, which could harm the lock.

The most common cause of cracks in the cylinder head is overheating. This can occur when the cylinder head and block are made of various metals like cast-iron and aluminum. Different metals can be heated and cool at different rates. This could cause localized hotspots to expand quicker than the rest.

Another possible cause of cracks in cylinders is corrosion. If the head and block of the cylinder are not maintained in a timely manner they could corrosion or rust and cause them to expand faster than they would normally. This can lead to cracks in the future.

If your uPVC window or door lock is brittle or requires an enormous amount of pressure to turn, it can be the result of a number of things. A malfunctioning locking mechanism, misalignment, or the wear of the handle are typical causes of this problem.

Fortunately, this is an easy and affordable fix for the majority of double glazing owners. A professional locksmith will typically be able to solve this issue within a matter of hours of arriving at your home. Based on your requirements, they can replace the locking mechanism, replace the window handles, and change the gearboxes. A professional locksmith will always be able advise you on the most cost-effective solutions for your home. They may suggest upgrading to 3 Star TS007 Euro Cylinders, double Glazing repair which provide an additional layer of protection against burglars. This is a small price to pay for the peace of mind that comes from knowing that your uPVC doors are secure.

Broken Handle

Window handle locks are complex mechanisms that deteriorate with age and use, so it's no surprise they occasionally break. It isn't always easy to pinpoint the cause of the broken window handle lock and repair it correctly.

Fixing the broken handle, regardless of whether it's the internal latch or the locking mechanism can increase the security of your uPVC door and reduce the risk of draughts. It can be expensive to repair or replace the handle in a way that isn't done correctly. It can also harm the frame and the lock of your door.

Screwdriver: With the window open remove the screw that holds the handle. The screw should be on the inside of the back plate, which is usually concealed by an aesthetically pleasing cover for the screw reasons. Be sure to not damage any of the internal components inside the handle, such as the plates or levers that are on the opposite side of the spindle. Keep them in the same order so that it is easier to replace if necessary.

Then, using an additional screwdriver, loosen the screw that holds the handle to the spindle on the back. Once the screw is released, you'll be in a position to pull the handle off and take off the damaged spindle. Replace it with a brand new one, ensuring it's the same length as the old one (you can typically find these on the internet or in hardware stores) and screw it securely in place. Be cautious not to overtighten as this could cause damage to the handle or the window frame.

Close the handle and test it. It should work smoothly, and you will be able open your window once again.

Don't forget to double-check that your uPVC window is shut properly when you're using the handle. If they aren't closing properly, you could experience damp or draughts in your home. You could also compromise the energy efficiency of your home. Core Sash Windows is a local window company that can alter the hinges of your window replacement frames to ensure that they shut properly.

Broken Spindle

It is often the case that the spindle in the handle breaks, rather than the handle itself. This is most common in uPVC tilt-and-turn windows. These windows require a handle to operate a locking device in the frame of the window. The handle is attached to a central rod that triggers the cams with a mushroom shape that secure into the frame of the window keep. If the dead latch mechanism fails to open when the handle is turned, it's likely the spindle has been damaged. This could be a problem that is frustrating.

Luckily, there are ways to rectify this issue. A good locksmith will be able to quickly and effectively fix this issue. A professional locksmith will be able disassemble the window's handle using a tool to remove the wheel part where the spindle is located. This can be done with no damage to the handle or window frame.

After removing the wheel, the technician can examine the spindle to determine what caused it to break. This involves disassembling the spindle and inspecting each component part, noting any wear or damage. This process is typically carried out in a clean room by highly skilled technicians.

The next step is to clean the damaged spindle, this helps eliminate any debris or dirt that could be hindering its normal functioning. The spindle may be replaced or repaired. If it is replaced, the technician will need a dowel of a similar size to the one used in the first and drill mating holes into both pieces of the spindle. This will ensure that the new spindle has an exact fit with the handle.

If the damaged spindle is beyond repair, it could be necessary to replace it entirely. Home centers sell generic replacements, but if your window design is unique you'll require contacting an expert in woodworking or cabinet making who can recreate the exact component. After the spindle is installed, it is attached to the handle. The screw holes on the handle to the screws already in the frame. Once the handle is set, you are able to operate your uPVC windows.