Double Glazing Door Lock Repairs

Is your uPVC door or window mechanism broken? Perhaps the handles on your uPVC windows and doors aren't aligned correctly or are difficult to operate.

It is essential that the double glazed doors work smoothly, otherwise you'll be wasting energy and increase the chance of burglary. Owen the Locksmith can repair your door lock for an affordable cost.

Snapped Key

It can be frustrating when a key is snapped into a lock. This can also be a security problem, as it may make you vulnerable to burglars if your door does not lock. Fortunately, there are simple fixes you can attempt to fix the issue and get your door working correctly.

Be calm. If you get scared and start doing a lot of fumbling around, you might just end up pushing the broken piece of the key even further into the lock, which could make the situation even more difficult.

Next spray WD-40 or another penetrating oil into the lock to aid in making the broken piece slide out more easily. You can also use a screwdriver to break off any pieces that are stuck. If you happen to have a bit of the key left visible, you can make use of a paperclip, or any other metal object that is thin to grab it and remove it. Both of these methods work well, but be cautious not to push the broken piece of the key even further into the keyway.

Some paperclips come with grooved edges that can be used as hook extractors. Jigsaw blades can also work well for this. If you don't have any of these handy, you can make use of needle-nose pliers that bend to create hooks. Additionally, a pair of tweezers can be used to grip and pull out the remaining bit of the broken key.

If you can't get the broken piece of the key out, try using a lock de-icer. It is available in most hardware stores and works by freezing any moisture present within the lock.

If none of these solutions work, it might be time to contact a locksmith. The experts at Fitlocks can quickly fix problems with uPVC door mechanisms and locks that have snapped keys as well as broken handles. They can also alter your double glazing door mechanisms to make them more user-friendly. You can request a double-glazing repair online or call us to discuss your requirements.

Broken Cylinder

A broken cylinder can be a serious security risk. A professional locksmith can easily repair the cylinder. A locksmith must tap the cylinder in order to fix it. They can do this using the hammer or any other tool, but the most efficient way is to employ a long match or piece of wire. Then, put the match's end or wire close to the keyway. After that, the locksmith can strike the lock to crack it open. This is much safer than using a hammer that can harm the lock.

Overheating is the most common reason behind cylinder heads cracking. This can occur when the block and cylinder head are made of various metals, such as cast-iron or aluminium. Different metals can heat up and cool off at different rates. This could cause localized hotspots to expand faster than the rest.

Another reason that could cause cylinder cracks is corrosion. If the cylinder head and the block of the cylinder are not maintained properly, this could result in corrosion or rust that could cause them to expand at greater rates than they should. Over time, this can also lead to cracks.

If your uPVC door or window lock is brittle or requires lots of pressure to turn, this can be caused by many things. This problem can be caused by a malfunctioning locking mechanism, or misalignment and also a worn out handle.

This is a simple and cost-effective fix that a majority of double glazing owners can do. A professional locksmith will usually solve the issue within one hour of arriving at your property. They can replace the locking mechanisms, or window Repair change the window handles and replace the gearboxes, depending on your specific needs. A professional locksmith can always advise you on the most cost-effective solution for your home. They may recommend upgrading to 3 Star TS007 Euro Cylinders, which provide an additional layer of protection from burglars. It is a small cost to get the peace of mind that comes from knowing that your uPVC door is secured.

Broken Handle

Window handle locks have complex mechanisms that deteriorate with age and use, so it's no surprise that they sometimes break. It isn't always easy to pinpoint the reason for a broken window handle lock and repair it correctly.

Whether the problem is related to the locking mechanism inside or the latch, fixing your broken handle will increase your uPVC double glazing near me glazing door's security as well as help you to stop the draughts. It can be expensive to replace or repair your handle if it is not done correctly and can also harm the frame and the lock of your door.

Screwdriver: With the window open and the screw loose, loosen the handle. It should be located on the inside face of the back plate, normally concealed by an attractive cover for the screw for aesthetic reasons. Be careful not to lose any of the internal components within the handle, for example the plates or levers on either side of the spindle. Keep them in the same arrangement so that it is easier to replace them if needed.

Next, turn the handle until it's 90 degrees to the window frame. Finally, loosen the screw on the back of the handle that fixes it to the internal spindle using a second screwdriver. Once this is removed, you should be able to pull the handle away and pull out the broken spindle. Replace it with a brand new one, ensuring it's the same size as the old one (you can typically find these on the internet or in hardware stores) and screw it securely in the correct position. Be cautious not to overtighten because this could cause damage to the handle or the window frame.

Ensure the new handle is correctly installed after which you can close and test the handle. It should function smoothly, and you will be able to open your window once more.

Make sure to check that your uPVC window is shut correctly while you're working with the handle. If they're not closing properly, you may experience damp or draughts in your home. Also, you could be compromising the energy efficiency of your home. A local window company, such as Core Sash Windows, will be able to adjust the hinges on your window frames so they can shut properly.

Broken Spindle

It is often the case that the spindle in the handle is broken, not the handle itself. This is most common in uPVC tilt-and-turn windows. These windows require a handle that acts as an electronic locking mechanism within the window repairs near me frame. The handle is attached to a central rod which activates mushroom-shaped locking cams that secure the window frame keep. If the dead latch mechanism fails to open when the handle is turned it is possible that the spindle has broken and this could be a frustrating problem.

There are ways to fix this issue. A good locksmith can quickly and efficiently fix this problem. They will be able to take apart the window handle using a tool to remove the wheel component of the mechanism, where the spindle is. This is done without damaging the handle or causing other damage to the window frame.

After removing the wheel the technician can inspect the spindle and identify the reason for its break. This involves breaking the spindle into its constituent components and carefully observing their general condition as well as any particular areas of damage or excessive wear. This procedure is usually carried out in a clean room by skilled technicians.

The next step is to clean the damaged spindle, this assists in removing any dirt or other debris that might be obstructing its normal function. Following this the spindle could be repaired or replaced. If it is replaced, the technician can take the dowel that is similar in size to the one used in the first and drill mating holes into both pieces of the spindle. This ensures that the new spindle has an exact fit with the handle.

If the spindle that is damaged is beyond repair, it may be necessary to replace it entirely. Home centers sell generic replacements but if the window style is rare, you will have to speak with an expert in cabinet making or woodworking who can recreate the exact component. Once the new spindle is in place it can be attached to the handle by lining up the screw holes in the handle with the frame's existing screws. Once the handle is securely in place, you can use your uPVC windows.