Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are easy to maintain and durable, as well as long-lasting. Unlike timber and aluminium, they do not corrosion or rot.

It is important to clean and oil UPVC doors and windows regularly. This will reduce costly repairs and improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows could cause significant damage to your home and may even be fatal. You should take the time to make sure that your windows are in good shape.

Single-pane windows are relatively easy to replace, and they generally fit into old frames very easily. However when you have double pane windows that are held in place by internal beading, it will be more difficult to take out the existing panes and install new ones. In this situation, you will need to locate some plastic spacers that will help the new pane to fit correctly into the window frame.

Wearing eye protection and heavy gloves is essential for anyone who plans to remove the glass yourself. It is also an excellent idea to lay down a drop cloth prior to when you begin working on the glass to ensure that any shards will fall onto the fabric instead of landing on the floor where they can be trampled upon and cause further damage.

It's a great idea to cover the gap with tape after the glass is removed. This will keep water and drafts from entering your property until a professional arrives to repair the window. This also serves as an obstruction to prevent intruders from making their way into your home. If the distance between the window and the door is substantial, you may need to consider security screens that includes a window. This will give you the best of both.

2. Sagging

Upvc windows and doors are a low-cost energy efficient, timber durable and long-lasting alternative to timber windows made of sash. However, over time they can suffer from a variety of issues, including sliding. A sagging window in uPVC can cause issues with light, draughts, and even security. It's important to take action as soon as you realize that your uPVC windows are sliding.

To repair a window repair near me that is sagging, you can try repositioning the hinges. First, you'll need to open the windows to access the frame. After that, using a screwdriver, you can take off the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. After you've repositioned the hinges, close your window and check for fit. If you're satisfied with the fit of the window, you can tighten screws to hold them in place.

If you are unable to reposition the hinges, you might have to replace the seal. Over time, rubber seals lose their elasticity and dry out, which causes their tightness to decrease. If this happens, it's essential to replace the seal as soon as you can to ensure that your uPVC windows are watertight and secure from draughts.

uPVC handles may also loosen. The majority of the time it is due to screws that have become loose over time. However, it could be due to the fact that the handle mechanism has been worn out. It's relatively simple to repair a loose uPVC handle. You'll first need to close the window and then perform an experiment fitting. The joints at the corners of the sash must align with the joint on the casing. If it isn't then you can use a screwdriver to loosen the handle and then reverse the mechanism back into its original position.

3. Water Leaks

If you're waking up to wet floors and mouldy walls every time it rains it is important that you take action. Windows that leak water do are not just a cause for degradation of your home's structure but also undermine your efforts to regulate the temperature in your home. The most frequent reason for leaks in uPVC windows is that the sealant around the frame has been damaged or is missing.

This is a simple fix that can be done by any DIYer who is competent. Depending on the severity of the problem the old caulking might need to be removed before a new layer of caulk can be put on. It is important to keep in mind that when it comes to uPVC window repairs you should avoid the temptation to "over-caulk' as this will only make the area harder to clean and can decrease the efficiency of your energy usage.

It is crucial to make sure that the drainage holes are clear of debris and that the sill pan is angled in a way that allows it to drain away from the window. In more extreme situations, you may have to replace the window.

Mold spots and rotten sills are another sign of water leakage. The is a fungus that thrives in damp conditions and can quickly spread across the home.

It is also important to remember that if the leak is coming from between the glass of your double-glazed windows, it is more likely to be an issue with the glass seal, rather than the frame or sagging. This can be easily fixed by an uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame if your uPVC window is difficult to open, or if it opens in the breeze. These are easily repaired by any DIYer who is skilled and can usually be done within a few minutes.

Like any mechanical part hinges are prone to be damaged over time. It is very easy to change a window repairs near me hinge but it's much simpler if you have someone to help you to hold the frame.

It is also important to ensure that the uPVC hinges are being opened and closed in the correct direction. Look for the arrows that are on each hinge to determine the direction in which the window should be opened.

The problem with the hinges on windows can be caused by incorrectly opening the window a certain way or by poor installation at the factory. This issue can be fixed by sending us a picture through our website and we will be more than happy to give you advice.

Regular lubrication of hinges is also essential. Applying an engineering lubricant that is light to the hinges is an ideal method to accomplish this. We recommend using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can help the window to operate and close more smoothly. It also helps prevent corrosion and reduce the risk of sticking. It is recommended to do this once a year. WD40 and other solvent-based lubricants should not be used since they can cause damage to your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by a variety of various factors. Firstly the hinges, again because of wear and tear, could become misaligned. This will cause a gap to form where the sash meets the frame. If they are damaged beyond repair, it may be necessary to have them realigned. The interlock may be unbalanced. It is located on the hinge side and might require to be cleaned. In certain instances, it may be necessary to replace these.

The second most frequent reason for draughts is window seals, these are susceptible to being worn out or damaged over time and will allow air to escape through these gaps. Replacement of these with high-quality weatherstripping is a good way to prevent draughts. Another alternative is to replace the upvc window with glass that is low-emissivity, this will help in regulating indoor temperatures, and also reduce the risk of draughts.

Lastly, one of the most effective methods to reduce draughts is by using an draught excluder. These are typically fabric tubes which are filled with a sort of filler and can be positioned on the top of your windowsill. They will help block out cold air and keep your home warm and cozy!

Your windows made of upvc will keep providing excellent insulation and security in your home with regular maintenance and repairs. It is crucial to realize that windows last for a certain period of time and there may come a point where it is more efficient to replace them than fix them. So, if you are experiencing problems with your upvc windows, it is recommended to seek help from a professional immediately.