Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are durable, long-lasting and easy to maintain. They are not susceptible to rot or rust like aluminum and timber.

It is important to clean and oil UPVC doors and windows on a regular basis. This will help prevent unnecessary repair costs and also improve energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a huge deal of damage to your home, making it extremely dangerous and possibly fatal. It is important to take the time to make sure that you're doing everything you can to ensure that your windows are in good shape.

For single pane windows it is relatively easy to replace them, and the replacement will usually fit inside the old frame very easily. However, if you have double-pane windows that are anchored by internal beading, it will be more difficult to remove the existing panes and install new ones. In this case you'll need source some plastic spacers to help the new pane to fit correctly into the window frame.

Wearing eye protection and heavy gloves is essential when you are planning to remove the glass yourself. It is also recommended to lay down a drop cloth before you start working on the glass so that any shards will fall onto the fabric instead of onto the floor where they could be trampled on and cause further damage.

It's a great idea seal the gap after the glass has been removed. This will stop water and drafts from entering your property until a professional is able to fix the window. This also serves as a barrier to prevent any criminals from getting into your home. If the distance between the window and the door is substantial, you may need to consider a security screen that also has an opening. This will provide the best of both.

2. Sagging

uPVC is a durable, energy-efficient and affordable alternative to timber sash windows. However, over time they may be afflicted by a variety of issues like sliding. A sagging uPVC windows can cause problems with light, draughts and even security. It's crucial to act as soon as you realize that your uPVC windows are falling down.

To repair a window that is sagging, you can try to reposition the hinges. First, you'll need to unblock the windows so you can access the frame. You can then unscrew both the hinges at the top and bottom using a screwdriver and adjust them clockwise or counter-clockwise. Once you've repositioned the hinges, close your window and check for fitting. If you are happy with the fit of your window repair near me, tighten the screws to secure them in the right position.

If you are unable to reposition the hinges, you might require replacing the seal. Over time rubber seals can lose their elasticity and become dry which causes them to loosen. It is crucial to replace your seal as quickly as you can in order to ensure that your uPVC window watertight and draughtproof.

uPVC handles may also become loose. This is usually due to screws that have been removed over time, but it could also be due to the handle mechanism wearing out. It's relatively simple to repair a loose uPVC handle. The first step is to close your window and do an initial test to ensure that it fits. The joint at the corners of the sash must align with the joint on the casing. If it isn't, you can use a screwdriver to loosen the handle and return the mechanism to its original position.

3. Water Leaks

It is important to act if you awake each day to find a smoky wall and wet floors. Windows that leak water do not only lead to the destruction of your home's structure but also hamper your efforts to regulate the temperature inside your home. The most common reason for leaks in uPVC windows is that the sealant surrounding the frame is either damaged or not present.

This is a fairly simple fix that can be done by any competent DIYer. Depending on how serious the issue is, the old caulking may need to be removed. It is essential to remember that when it comes to uPVC window repairs, do not be tempted to 'over-caulk' as this will only make the area more difficult to clean and reduce your energy efficiency.

It is important to check that any drainage holes are free of debris and that the sill pan has been angled in a way that allows it to drain away from the window. In more extreme situations, you may have to replace the window.

Moldy sills and rotten ones are another sign of water leakage. This fungus thrives in damp conditions and can spread quickly throughout the house.

If the leakage occurs between the double-glazed glass it is more likely the issue is with the seal rather than the frame. A uPVC specialist can fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or slack and open in a breeze, it may be hinges that are at the fault. They can be easily replaced by any competent DIYer and are usually completed in a matter of minutes.

Nearly every home in the UK will have top-hung or side hung uPVC windows that use hinges and, like all mechanical parts, they can wear down over time. The process of replacing a hinge on a window is essentially a very simple process, but it's easier to do when you have a person to help hold the frame in place.

It is also important to verify that the uPVC hinges are being opened and closed in the right direction. Look for the arrows that are on each hinge to determine which way the window should be opened.

The problem with the hinges on windows can be caused by incorrectly opening the window in a particular way or due to improper installation in the factory. This can often be resolved by sending us a photo on our website. We will be more than happy to give you suggestions.

Regular lubrication of the hinges is essential. Applying a light engineering lubricant to the hinges is an ideal method to accomplish this. We recommend using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window to open and close more easily. It can also reduce the chance of windows sticking and help prevent corrosion. This is recommended to be done at least once a year. WD40 and other solvent based fluids are not recommended since they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by several different factors. The hinges can also be disaligned as a result of wear, which can cause gaps where the sash meets frame. This can be easily repaired by giving them good clean, but in the event that they are beyond repair it could be necessary to have them aligned or replaced. In addition, the interlock could be disaligned. This happens on the hinge's side, and might require to be cleaned. In certain instances it is possible to replace these.

These seals can wear down or get damaged over time, allowing air escape. Installing high-quality weatherstripping is a good way to stop draughts. Replace the windows made of Upvc with low-emissivity glasses. This will help control indoor temperatures and lessen the risk of draughts.

Another method of reducing draughts effectively is by using a Draught-excluder. These are usually made of fabric tubes filled with a filler which can be placed over your window sill. They can keep your home warm by blocking cold air.

With a little maintenance and upvc window Repairs repair windows made of upvc will provide a great level of security and insulation for your home. It is crucial to recognize that all windows have a life span and they may reach the point when it's more economical to replace them than fix them. If you are experiencing issues with your upvc window, it's best to consult a professional as soon as possible.