Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are easy to maintain and are durable and long-lasting. In contrast to aluminium and timber, they do not rust or rot.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will reduce repair costs as well as improve the efficiency of energy.

1. Broken Glass

If the glass in your window is broken it can cause a huge deal of damage to your home, making it very dangerous and potentially fatal. It is crucial to take the time to make sure that you are doing everything you can to ensure that your windows are in good condition.

Single-pane windows are relatively simple to replace and will usually fit into the old frames very easily. However when you have double-pane windows that are secured by internal beading, it will be more difficult to remove the old panes and put in new ones. In this instance, it is necessary to purchase plastic spacers in order to make sure that the new pane fits into the window frame.

If you're planning to attempt to remove the glass panes yourself it is crucial to wear the proper safety gear that includes gloves with a thick layer of material and eye protection. It is also an excellent idea to lay down a dropcloth before you start working on the glass to ensure that any fragments of glass fall onto the fabric instead of onto the floor where they can be trampled on and cause further damage.

Once the glass is removed and the glass is removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to stop drafts and water from entering the home until a professional is able to come out and repair the window. This will also act as a barrier, preventing any intruders to gain access to your home. If the gap between the window and the door is large, you might need to consider security screens that includes a window. This will provide the best of both.

2. Sagging

uPVC windows and doors are a cost-effective, durable and energy-efficient alternative to timber sash windows. In time, they could develop a number of problems such as sagging. A sagging window in uPVC could cause issues with light, draughts and even security. If you find that your uPVC window is beginning to sag it's important to act quickly to stop the issue from getting worse.

To repair a window that is sagging, you can try repositioning the hinges. First, you'll need to open the windows so you can reach the frame. With an screwdriver, remove the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. After you've repositioned the hinges, shut your window and check for an appropriate fit. If you're satisfied with the fit of the window, you can tighten screws to keep them in place.

If you can't reposition the hinges you may need to replace the seal. Over time rubber seals can lose their elasticity and dry out and cause them to loosen. If this happens, it's essential to replace the seal as fast as possible so that your uPVC windows are watertight and safe from drafts.

Upvc window repair handles can also loosen up. Most often this is due to screws that have come loose over time. However, it could occur because the handle mechanism has been worn out. Fortunately, it's easy to fix the loose uPVC window handle yourself. You'll first need to close the window and perform an initial fitting. The joints at the corners of the sash must align with the joint on the casing. If it isn't, you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism to position.

3. Water Leaks

It is crucial to take action if you wake up every morning to find mouldy walls and floors that are wet. The leaks of water through windows could cause structural damage to your home and also impact your ability to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

It is a fairly easy fix that can be completed by any competent DIYer. Depending on the severity of the issue is, old caulking may need to be removed. It is crucial to keep in mind that when it is about uPVC window repairs, you should not be tempted to 'over-caulk' as this will only make the area harder to clean and could reduce your energy efficiency.

It is important to check that any drainage holes are clear of debris and that the sill pan is placed in a way that allows it to drain away from the window. In more serious cases, you may need to replace the window.

Other indicators of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the wall near the window. The is a fungus that thrives in damp conditions and is able to quickly spread throughout the home.

If the leakage occurs between the double-glazed glass, it is more likely that the issue is related to the seal, not the frame. A uPVC specialist can fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be the reason when your uPVC window is difficult to open, or if it opens with the breeze. These are easily repaired by any skilled DIYer and can usually be completed in just a few minutes.

Almost every household in the UK will have either top hung or side-hung uPVC windows that use hinges and, just like any mechanical component they can wear down over time. It's very simple to replace a hinge on a window however it is easier if someone helps you to hold the frame.

Verify that the uPVC hinges are closed and open in the right direction. Look for the arrows on each hinge to determine which way the window should be opened.

The issue can be caused either by opening the window incorrectly or a faulty installation in the factory. Sending us a photo via our website is often enough to resolve the problem. We are happy to provide advice.

Regular lubrication of the hinges is also necessary. Applying an engineering lubricant that is light to the hinges is an ideal method of doing this. We suggest using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It also helps prevent corrosion and decrease the chance of sticking. This is recommended to be done at least every year. WD40 and other solvent based oils are not recommended because they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different factors. The hinges may also become misaligned due to wear, creating a gap between the frame and sash. This can be easily repaired by giving them a good cleaning, but in the event that they are beyond repair it may be necessary to get them realigned or replaced. In addition, the interlock could be unbalanced. This is located on the hinge's side, and might require to be cleaned. In some cases it might be necessary to replace the hinges.

The next most common cause of draughts is the window seals. They can become worn down or damaged over time and let air escape through the gaps. Installing high-quality weatherstripping can help prevent draughts. Another option is to replace the window with low-emissivity glass, which will help regulate indoor temperatures and upvc Window Repair again will lessen the possibility of draughts.

The last way to reduce drafts effectively is to use a draught-excluder. These are usually made of fabric tubes filled with a filler, which can be hung over your window sill. They will help block out cold air and keep your home warm and cosy!

With a little regular maintenance and repairs, your upvc windows will provide a great level of insulation and security for your home. However, it is important to recognise that all windows have a life span and eventually, they will reach a point where it is more cost-effective to replace them rather than repair them. If you encounter any issues with your upvc window it is recommended to speak with a professional immediately.