Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are easy to maintain and durable, as well as long-lasting. Unlike timber and aluminium, they don't get rusty or decay.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will help avoid unnecessary repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a great deal of damage to your home, making it very dangerous and potentially fatal. It is crucial to take the time to ensure that you are doing everything you can to keep your windows in good condition.

For single pane windows, it can be relatively simple to replace them, and the replacement will usually fit inside the old frame very easily. If you have double-paned windows that are joined by internal beading, it is harder to remove and replace the old panes. In this case you'll need to source some plastic spacers to assist the new pane to fit correctly into the window frame.

Wearing eye protection and thick gloves is a must for anyone who plans to remove the glass by yourself. It is also an excellent idea to lay down a dropcloth before you start working on the glass to ensure that any shards will fall onto the cloth instead of landing on the floor where they could be trampled upon and cause further damage.

It's a great idea to seal the gap after the glass has been removed. This will prevent water and drafts from entering your home until a professional comes out to fix the window. It also acts as a barrier to prevent any intruders from getting into your home. If the gap between the window and the door is large, you might need to consider an alarm system that includes a window. This will provide the best of both.

2. Sagging

Upvc is a long-lasting and energy efficient alternative to timber sash windows. In time, they could be affected by a variety of issues, including sagging. A sagging uPVC window can cause issues with light, draughts and even security. If you find that your uPVC window is beginning to lose its shape, it is important to act swiftly to stop the issue from worsening.

Repositioning the hinges can aid in fixing a window which is sliding. First, you'll need to unblock the windows so you can reach the frame. With a screwdriver, you can unscrew the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Close your window to check the fit after having repositioned your hinges. If you're happy with the fit, you can tighten the screws until they remain in position.

If you cannot reposition the hinges, you might have to replace the seal. Rubber seals can dry out and lose their elasticity over time, leading them to lose their tightness. If this happens, it's crucial to replace the seal as soon as possible to ensure your uPVC windows are waterproof and secure from draughts.

uPVC handles may also loosen. This is usually due to screws that have been removed over time, but it can be due to the handle mechanism wears out. Fortunately, it's easy to repair the handle of a window that is loose yourself. You'll first need to close the window and then perform an initial fitting. The corners of the sash must be aligned with the casing joint. If it does not, you can use the screwdriver to loosen the handle. Then, [Redirect-Meta-0] you can turn the mechanism to position.

3. Water Leaks

If you're waking up to wet floors and damp walls each time it rains, it's crucial to take action. Water leaks through windows can cause structural damage to your home and affect your ability to regulate the temperature inside your home. Most of the time, Rochester uPVC window leaks are caused by damaged or missing sealant.

It is a fairly easy fix and should be undertaken by any competent DIYer. Depending on the severity of the issue is, old caulking may have to be removed. It is essential to remember that when it is about uPVC window repairs you should not be tempted to apply too much caulk and then make the area more difficult to clean and can decrease the efficiency of your energy usage.

Check that any drainage holes do not have debris inside them and that the sill pan has been properly angled to drain away from the window. In more serious cases, you may need to replace the window.

Mold spots and rotten sills are another sign of water leakage. This fungus thrives in conditions of dampness and can spread quickly throughout the house.

If the leakage occurs between the double glazing repair Folketone-glazed glass it is more likely the issue is with the seal than the frame. It is also possible to be fixed by a uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault if your uPVC window is difficult to open or if it blows open with a breeze. These are easily repaired by any skilled DIYer and can be completed in just a few minutes.

Nearly every home in the UK will have either top hung or side-hung uPVC windows that have hinges and like any mechanical part they are susceptible to wear and tear over time. It is an easy procedure, but it is easier to do when you have a person to help you hold the frame in place.

Check that the uPVC hinges are closed and open in the right direction. You can check this by looking for the arrow on each hinge, this indicates the direction in which the window should open.

Window hinges that aren't working properly could be caused by improperly opening the window in a particular manner or because of improper installation in the factory. Sending us a photo through our website can often resolve the problem. We are more than happy to give suggestions.

Regularly lubricating the hinges is essential. Applying a light engineering lubricant on the hinges is a great method to accomplish this. We suggest using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also prevent corrosion and reduce the possibility of sticking. The ideal time to perform this every year. WD40 or other solvent-based oils are not recommended as they could damage your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by a few different factors. The hinges can also become misaligned due to wear, creating an opening between the frame and sash. These can be easily repaired by giving them a good clean, but in the event that they are beyond repair it might be necessary to have them re-aligned or replaced. The interlock may be misaligned. This happens on the hinge's side and could require to be cleaned. In some cases it might be necessary to replace them.

The seals may wear out or get damaged over time, allowing air escape. Installing high-quality weatherstripping can help prevent draughts. Replace the windows made of upvc with low-emissivity glasses. This will help to regulate indoor temperatures, and reduce draughts.

The final method to cut down on drafts effectively is to use a Draught-excluder. These are typically fabric tubes filled with a filler, which can be hung over your window sill. They will keep your home warm by blocking cold air.

With a bit of regular maintenance and repair, your upvc windows will provide an excellent level of security and insulation for your home. It is crucial to recognize that all windows have a life span and eventually, they will reach an point at which it is more efficient to replace them than fix them. If you have any problems with your upvc window, it's best to consult a professional as soon as possible.