Peugeot 308 Key Fob Problems and How to Fix Them

If your Peugeot key fob suddenly stopped working, it could be due to a dead coin-cell battery, damaged receiver modules, water issues, or even a defective chip. Fortunately, these issues are easy to fix and you'll be able to get your vehicle back to normal in no time!

Car keys can also become faulty due to the blade getting worn. This can be fixed by visiting your local Car Key Man Auto Locksmith and let them fit the new key blade for you.

Battery

The battery that powers the replacement key for peugeot partner van fob on your peugeot 207 car key 308 can sometimes die or become insufficient to send an energizing signal to the car. The key fob could stop working and prevent you from locking or unlocking your doors or starting the engine. To fix this issue, you'll need to replace the battery on the key fob.

You'll need to purchase a new battery from an auto parts store or your local hardware store. Make sure the battery is brand new and has not sitting on the shelf for too long. A new battery has greater capacity and can transmit a stronger signal your car.

After replacing the battery, try unlocking and locking the doors of your Peugeot by using the key fob. If the doors won't open it is most likely with the car's receiver module which can be changed by your local Peugeot dealer.

It's also possible that the chip inside your key fob has been damaged. It is possible to cause damage to your key fob if you drop it on the ground, or [Redirect-Java] expose it to moisture. The rubber seals that shield the chip from moisture might be worn down over time, particularly if your key fob is exposed to water for lengthy durations, like submerging it in the ocean at the beach. To avoid this from happening, it's essential to keep your key fob safe from water and never let it come into contact with water.

Water Damage

Don't give up on your key fob if it gets wet, whether you dropped in the pool or slipped into a water puddle. While the key fob has rubber seals to protect it from water, prolonged exposure to water can cause damage to the electronic chip. Water is a good conductor, and any water that is absorbed into the key fob will trigger an array of short circuits which eventually damage the electronic chip. After removing the battery clean the contacts with isopropyl alcohol, and dry it completely before putting it back into.

Your Peugeot 308 may not start due to a dead battery. Jumper cables can be a great option to restart the engine if you own an extra car. If the battery is defective and needs to be replaced, it should be replaced.

A poor receiver in the car could also block it from receiving the signal from the keyfob. It could be a issue with the antenna, or wiring or the key fob could be damaged. If you are using a new key fob it might need to be programmed to the vehicle. If you're not able to fix the problem, contact a professional technician. A trained technician in the field will be able to determine the issue quickly and fix it immediately.

Radio Interference

Interference can trigger problems such as a key fob that's not being recognized or has a limited range. The interference could be radiated or transmitted, the latter caused by speaker and power cables passing too close to electrical components. In general, [Redirect-302] rerouting cables and moving them away from these components will fix the issue.

It's unlikely someone is listening to the key fob's signal in order to steal your vehicle It's possible, however, that radio interference has ruined the signal. This is a simple issue to solve.

If your key fob isn't being recognized by the system, try a new battery. Also, make sure that the battery is of the correct size and type. Batteries that aren't the correct dimensions can harm your battery.

These devices could interfere with the key signal if they operate on the same radio frequency. It is advised to avoid having these devices attached to your key fob.

Pairing Issues

The remote keyless entry system of a car has a receiver that receives radio signals from the key fob. If the receiver has developed issues, you will not be in a position to start your car even if your key fob functions and is reset. The issue could be caused by a range of things, including the battery of a coin that is dead and water damage. The receiver could also be failing due to a software glitch or internal damage in the key.

One of the most frequent reasons why your Peugeot 308 key fob doesn't work is because the battery inside has gone out of service. The battery can be replaced, but you need to ensure that it's the right battery for your keyfob. The wrong battery could cause more problems with the key fob, so it's best to use the original or an alternative that is similar in size, voltage, and specification.

Another reason your Peugeot 308 key fob might not be working is because it is connected to an unrelated vehicle. This could be the case if you have given your key fob to someone else or if the key has been used to unlock and begin other vehicles. It is possible to fix this issue by reprogramming the fob with an OBDII scanner. This tool will request information about your car, including its VIN or engine type. It is vital that you enter the correct details.