Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are long-lasting, durable and easy to maintain. They don't rot or rust like timber and aluminum.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will prevent unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window is broken it can cause a great deal of damage to your home, making it extremely dangerous and possibly fatal. It is important to take the time to make sure that you're doing all you can to keep your windows in good repair.

For single pane windows, it is fairly easy to replace windows, and the new one will usually fit inside the frame of the previous one easily. However If you have double-pane windows that are secured by internal beading it will be more difficult to remove the existing panes and install new ones. In this situation it is essential to purchase plastic spacers in order to make sure that the new pane fits into the window frame.

If you are going attempt to remove the window panes by yourself, it is essential to wear appropriate safety gear, including thick gloves and eye protection. It is also recommended to lay down a dropcloth before you begin working on the window panes so that any shards fall onto the fabric and not onto the floor and Upvc window repairs could be trampled under.

Once the glass is removed from the window, it's best to seal the gap with packaging tape or duct tape to stop water and drafts from entering the home until a professional is able to come out and repair the window. It also acts as an obstruction to prevent intruders from getting into your home. If the gap between the door and the window is significant, you may prefer an alarm system that has a window. This will provide the best of both.

2. Sagging

Upvc is a long-lasting and energy efficient alternative to timber sash windows. Over time, they can be affected by a variety of issues such as sliding. A sagging window in uPVC can cause problems with light, draughts and even security. It's important to take action immediately if you discover that your uPVC windows are falling down.

To fix a sagging window you can try repositioning the hinges. You'll first need to open the windows to reach the frame. Then, using a screwdriver, you can take off the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. After you've repositioned the hinges, close your window and test it for an appropriate fit. If you're satisfied with the fit, you can tighten the screws to ensure they remain in the right place.

If you cannot reposition the hinges, you might have to replace the seal. As time passes, rubber seals lose their elasticity and become dry, which causes their tightness to decrease. It is essential to replace your seal as quickly as you can to keep your uPVC window waterproof and draughtproof.

UPVC handles can also become loose. Most often, this is caused by screws that have come loose over time. However, it can be due to the fact that the handle mechanism has worn out. Luckily, it's not difficult to fix a loose uPVC window handle yourself. You'll first need to close the window and do an experiment fitting. The corners of the sash should align with the casing joint. If it isn't, you can make use of a screwdriver to loosen the handle and then return the mechanism to its original position.

3. Water Leaks

It is essential to take action if you awake each day to find mouldy walls and floors that are wet. Windows that leak water do not only lead to the degrading of the structure of your home but also hamper your efforts to regulate the temperature in your home. The most frequent reason for leaks in uPVC windows is that the sealant surrounding the frame is damaged or missing.

This is a simple fix that can be accomplished by any DIYer who is competent. Depending on the severity of the problem the old caulking may need to be removed before a fresh layer can be applied. It is important to remember that when it comes to uPVC window repairs, you should not be tempted to 'over-caulk' as this will only make the area more difficult to clean and could reduce your energy efficiency.

Verify that the drainage holes are free of debris inside them and that the sill pan has been properly angled to drain away from the window. In more serious cases you might have to consider replacing the window.

Moldy sills and rotten ones are another sign of water leakage. This fungus thrives under damp conditions and can spread quickly throughout the home.

It is also important to remember that if the leak is coming from between the glass in your double glazed windows, it is more likely to be a problem with the glass seal, rather than the frame or sliding. It is also possible to be fixed by an uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or are loose and blow open in a breeze It could be hinges that are at fault. They can be easily repaired by any skilled DIYer and can usually be completed in just a few minutes.

Most households in the UK will have top-hung or side-hung uPVC windows that have hinges and, like all mechanical parts, they are susceptible to wear and tear over time. The process of replacing a hinge on a window repair is an easy process but it can be simpler with someone else to help you hold the frame in place.

Verify that the uPVC hinges are closed and open in the proper direction. This can be done by looking for the arrow on each hinge. This indicates which way the window should be opened.

Window hinges that aren't working properly could be caused by improperly opening the window in a certain way or by inadequate installation at the factory. Sending us photos via our website will often resolve the problem. We are more than happy to give suggestions.

Regularly lubricating the hinges is essential. Applying an engineering lubricant that is light to the hinges is a great method of doing this. We recommend using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window operate and close more easily. It also helps prevent corrosion and reduce the risk of sticking. This is recommended to be done at least once a year. WD40 and other solvent-based lubricants should not be used since they could damage your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different causes. The hinges, also because of wear and tear, could become misaligned. This will cause an opening to appear between the sash and the frame. If they're beyond repair, it might be necessary to have them realigned. Second, the interlock can also become unbalanced. This is located on the hinge's side, and might require to be cleaned. In certain instances it is possible to replace them.

These seals are susceptible to wear and tear or get damaged over time, allowing air to escape. Replacement of these with high-quality weatherstripping will help to keep draughts at bay. Another alternative is to replace the window with low-emissivity glass. this will help in regulating indoor temperatures and will reduce the risk of draughts.

The final method to cut down on drafts effectively is to use a draught-excluder. These are usually made of fabric tubes filled with a filler, which can be placed over your window sill. These will help to stop cold air from entering and keep your home warm and cozy!

With a little maintenance and repair windows made of upvc will provide excellent security and insulation for your home. It is essential to remember that all windows will eventually wear out and it could be more cost-effective to replace them than to repair them. If you are experiencing issues with your Upvc windows, it is always best to seek professional assistance immediately.