How to Replace a Nissan Juke Spare Key

Nissan Juke is a fun and stylish hatchback, with an unusual engine setup. It's noisy, but it's still a lot of fun to drive.

Replace the battery for the key fob of your Nissan Juke every two years or when it's low. It is easy to do at home, but you'll require some tools.

Dead Coin Battery

If the key fob in your Nissan Juke is not functioning, make sure you check the battery of your coin. It could be dead and requires to be replaced. This is a simple fix that will take only some minutes. You can do this by flipping the fob upside down and opening the tiny latch/release on the back. Replace the battery you have previously installed, making sure it is on the bottom of the fob. Place the two halves in a careful manner.

If the fob has been exposed to water, it will need to be cleaned prior putting the new battery in. This can be accomplished by using a paper towel along with isopropyl alcohol or electronic cleaner, and waiting for nowlinks.net it to dry completely before re-inserting battery.

The key fob needs to be connected with the vehicle to be able to start the car. This can be done by following the instructions in the owner's manual, or using an OBDII scanner. The most likely reason for why the key fob stopped working is that it wasn't connected to the car. A defective chip inside the fob can also cause it to stop working however this is not a common occurrence. In this case an entirely new receiver module might be required. If this is the scenario, the module will need to be replaced by a certified technician.

Water Damage

A key fob is powered by a battery, and these batteries should be replaced every two years or so, or at the first sign of your car not responding when you press the "start" button. The key's rubber seals are designed to keep out water, however submerging your key fob in the pool or ocean water could damage the electronic chip. If this happens then you'll need a replacement key from Nissan or locksmith.

If the key's fob has a working chip It's likely that the computer has lost connection to it, which can be the result of a variety of reasons. A simple restart of your car can fix this, but if the key's still showing the "Key ID" error message, you'll need to contact Nissan or an auto locksmith for assistance.

Three of the most common causes are a dead battery on the key fob or a key that's not programmed, and an unrepaired key fob that is damaged. The first two are relatively easy to fix, and the third is more difficult to fix in the moment, but it can be fixed with some patience. Compare Nissan Key Replacement prices in your area with WhoCanFixMyCar, and book your repair online. It only takes minutes, and you can even read reviews of customers from local garages, Nissan car mechanics and dealerships before you decide.

Faulty Chip

The key fob of your Nissan Juke has a special chip that sends an alert to the car whenever you turn it. If the chip is not functioning properly it could cause the key to cease working. If this is the case the issue is only solved by replacing the key. There are a myriad of reasons your Nissan Juke's keys could be faulty, including water damage, a dead coin battery or a malfunctioning receiver module.

If your key fob stops working after a soak in the wash or bath, you should check the chip for damage from water. Make sure that the metal clips that hold it in place are secure and that the chip isn't exposed to water. If you notice any signs of water damage to the electronic component, you should remove the battery and clean it with isopropyl ethanol or electronic cleaner.

If the chip is damaged You'll need to contact your local locksmith or dealer. They will need to know the year model, make, and year of your vehicle in order to locate an alternative. It is also necessary to write down the VIN (Vehicle Identification Number) to ensure that the dealer or locksmith can identify the key you have. This will allow them to find the correct key code and make sure that they are cutting the correct one.

Faulty Receiver Module

The key fob transmits the radio frequency signal to your car that performs a number of functions. It can unlock your trunk as you rush to the car with your groceries or start your car by pressing the button on the fob. It can also open your windows and turn the horn on if you accidentally lock the keys inside your car.

If the key fob ceases functioning, it could be a problem with the receiver unit in the vehicle. The receiver modules are tuned to detect specific frequencies that match the signals generated by the Nissan key fob. A malfunctioning receiver module can prevent your car from responding to the signal transmitted by the key fob of Nissan.

Whatever the way your Nissan key fob is damaged, it is always good to have a spare key in case the key gets damaged or lost. A spare key can be programmed by a locksmith or dealership to work with your Nissan and will help you avoid the hassle of locking your keys in your car or losing them.

If your Nissan Juke's key fob was exposed to rain or clean tap water, you can solve the issue by cleaning it with isopropyl, or an electronic cleaner. If, however, the chip has become damaged and you need to purchase a new key fob that can be encoded to your car by a locksmith or a dealer.