UPVC Window Repairs

Upvc windows are energy efficient and help to reduce heating bills. However, as they age problems can arise which need repair. This can be due to damaged handles, hinges or locks.

DIY enthusiasts can repair wooden windows with ease. It can also be much less expensive than a brand new replacement window.

Cracks

Cracks and tears in uPVC windows could be a serious issue. Unrepaired windows can cause water intrusion and weaker barriers to cold weather, and even structural damage. Find a local builder who specializes in the repair of uPVC frames. They should possess the necessary knowledge and experience, as well as the equipment needed to get the best results. This will ensure that the crack is repaired swiftly before it gets worse, and you don't need to replace your window unit or glass.

Small cracks in glass can be fixed by using a variety of home-based solutions. Super glue and masking tape are among the most popular products that can keep cracked glass in place for a few minutes. For cracks that are more extensive the tape may have to extend beyond the crack on both sides to achieve the optimal results.

Additionally, two-part epoxy can be used to fix broken or cracked glass. It is available at most hardware stores and can be bought for about $10. Make sure that your workspace is ready prior to mixing the epoxy. Also, ensure you have all the equipment required to complete the task.

If your upper or lower sash is difficult to raise it's due to the fact that the cords on the sash's weights have been damaged. Thankfully, this is an easy fix that can be done with the help of a ladder and a flathead screwdriver. Replacing a damaged drip cap is a second repair that can be completed at home. The drip caps that are not rot-free are available at a majority of home centers and can be secured with nails and caulked into place with ease. Also, if you have a double- or triple-pane window, be sure to make sure that one of the panes isn't broken. The reason is that the gases in the space between the windows are responsible for increasing the energy efficiency of the window. This should not escape.

Water Leaks

If your uPVC windows leak, it could ruin the interior of your house and cause costly repairs. Water leaks can also damage the structure of your house and lead to the growth of mold. To prevent damage, it's crucial to address any issues caused by windows that leak as soon as you can.

A damaged sealant around window frames is a common cause of leaks. Using silicone caulking can help improve the condition of the seal back to normal and prevent water leakage. Check for cracks and gaps around the window frame and also the stone or brick wall surrounding your windows.

A blocked drainage hole or an issue with flashing are the other two common causes of leaking windows. It's crucial to make sure the drainage holes are clean and unclogged, especially after a heavy rainstorm. It's also an excellent idea to check the flashing around the top of your window and make sure it's properly sealed.

Lastly, it's important to ensure that your drip cap isn't damaged or decaying. A rotted drip cap or one that's not there allows water from above to get into your window and cause structural damage. Replacing drip caps isn't a complicated job, and it's generally a simple process of buying a new one and putting it in the right spot.

It's an excellent idea to have your windows checked for water-tightness by a qualified. They can use a special tool to determine the water-tightness and strength of your windows and make sure that they meet industry standards. If your windows fail the test, you will need to replace them. It's a costly fix but it's is worth it to ensure the safety and comfort of your family.

Sagging

If your windows don't shut properly, it could lead to a number issues, such as condensation, drafts and an increase in your energy bills. It could also be an indication that the windows weren't properly installed or the sealant has worn away. There are fortunately, a few things you can do to fix the problem.

To repair your window correctly it is necessary to set up a workspace with plenty of natural light. Begin by placing newspaper or an old blanket on the floor to shield it from any splinters or Upvc Repairs drips that may come from the window as you work.

Use a white cloth soaked in a solution of detergent and water. This will ensure you don't leave any stains of color on your windows. Note the location of the hinge channel on your uPVC window when you are ready to begin working. Then unscrew the channel from the frame and fill the screw holes with epoxy (for uPVC windows) or wood filler (if the frames are constructed from wood). Make sure you scrape the hole you have filled before it sets.

Install the hinge channel after the holes are filled. Make sure it is centered on the window jamb. Also, make sure that you drill the new holes approximately quarter inch away from the original locations.

Then, measure the spindle protruding from the underside of your handle. You can request a replacement or bring it to a hardware shop for a replacement. Then, pull out the setscrew on the operator shaft and file it flat so the set screw is able to secure itself to the shaft (photo). Now your uPVC window should shut smoothly.

Broken Hinges

If your uPVC window hinges are damaged or aren't working properly and you are unable to open or close the window, it will be difficult to open or close the window. This could cause problems with security and prevent your home from staying warm or cool. It is easy to get a new hinge for your uPVC window. However, it's important to make sure you have the right hinge for your windows.

The hinges must be the same size in order to fit into the window doctor frame. The most commonly used hinge used in uPVC windows is a standard 15mm or 18mm UPVC window hinge. There are also specialised hinges for wooden frames. The proper hinge can help you avoid common problems with your windows.

There are many reasons why your window hinges could be loose or stiff. The hinges may not be properly tightened. To check this, use a screwdriver and find the friction screw on the hinge's end. Then loosen it. Then, you are able to adjust the hinge by twisting it in any direction until you get the desired result.

If your UPVC window hinges are not functioning as they should, you can call Preston Glass Fix for a quick repair. Our technicians will inspect the condition of your hinges and give you suggestions on the best solution. We can replace the window hinges, re-tension them or install new locking mechanisms to ensure that your upvc repairs near me windows are secure and safe for years to come.

Locks that aren't working

UPVC window mechanisms and locks are a crucial component of home security. They make it very difficult to open a window without breaking into the home. When a lock fails, it can be a frustrating experience, but it is a quick and simple fix and you don't need to replace the entire window.

Often the problem can be an issue that could have been avoided if you have had regular maintenance. This is why we suggest getting your uPVC windows serviced regularly with our yearly maintenance package to reduce the chance of having problems.

Modern uPVC windows are equipped with espagnolette locks. They work by pushing the nose end of the handle onto the wedge block, Upvc Repairs then turning it to close the lock. They are very effective in keeping the window secure, but over time they can start to fail if not properly maintained. We suggest using WD-40 for lubrication a couple of times per year.

If you find that your uPVC window isn't opening or closing as easily as it did in the past, or if the lock doesn't work properly, there could be a problem with the locking gearboxes within the frame. This can be difficult to access as it requires the removal of the seals that surround the frame of the window and then taking the handle off.

A locksmith who specialises in UPVC repairs is able to identify the problem quickly and will then be able to repair the failed locking gearbox with an exact replacement. This quick and easy fix could save you hundreds of dollars by not the need to purchase new windows.