How to Replace a Volvo Replacement Key Fob

Your Volvo key fob can do more than simply unlock and lock your vehicle. It's also a sophisticated antitheft device that uses special technology to communicate with your car in order to stop theft.

What happens what happens if the battery for your key fob is dead? Our team at Volvo Cars Mission Viejo has all the answers!

How to unlock Your Vehicle

Modern electronic key fobs offer greater functionality and volvo v70 key ease of use as compared to manual keys. However, they require batteries that will eventually wear out and need to be replaced. If your Volvo key fob has started to work intermittently, that's an indication that the battery is getting old and will need to be replaced soon.

You can replace the Volvo key fob batteries on your own by following a few simple steps. Choose a clean, dry surface to work on. Lay out all the tools you need. Locate the battery hatch and make sure that it is set to "open." Make use of a flathead screwdriver, coin or any other similar tool to open the hatch to open. Then, carefully pull out the battery by lifting the side closest to the key-ring hook. Be sure to use rubber gloves to avoid damaging the clips or electronic contact surfaces.

Place the new battery in the socket once the old one was removed. Make sure that the positive side is facing upwards and that it is placed in all the clips. Slide the cover down toward the key-ring portion until it becomes loose and falls off. Then, remove the cover to reveal the key blade hidden inside. This can be used to unlock your car from the driver's side door If the battery for your key fob is dead or lost.

How to Start Your Vehicle

Most modern vehicles are equipped with key fobs that do much more than unlock or lock the doors. They can also perform other functions like summoning and auto parking the vehicle. In fact, the newest Volvo XC60 can even remotely start the engine using key fob buttons. How does it work exactly?

Choose a surface where you can put all the materials required to complete this project. Place the fob on top of the surface with the volvo v70 key (Find Out More) logo facing up. Make use of a flathead, coin, or similar tool to open the battery hatch. Be careful not to touch the electronic contact surfaces of the fob using your tools, as this may cause the fob's key to cease functioning properly.

Once the hatch is open, slide the battery into its socket, making sure it is in the correct position with the positive (+) side facing up. After the clips are put in place replace the battery cover, and reassemble your fob.

Pressing the unlock button one time will disengage the alarm and unlock the driver door. Repeating this action will unlock all doors as well as the tailgate. The unlock button can also be used to roll down the windows on an extremely hot day or to let in fresh air before climbing behind the wheel. If you'd like more than that, the keyfob can be used to activate the ERS that will begin the climate control system of your vehicle. It will warm or cool the vehicle to desired temperature setting when the vehicle is parked.

How to replace the battery

If your key fob is no longer locks or unlocks your vehicle, it could be time to replace the battery. The battery can be replaced using a flathead screwdriver plastic pry bar or other small tools. Find the small slot is used to house the backup or emergency metal ignition key. Place the blade of your screwdriver or pry bar tool into this slot and gently open the rear of the fob for the key. Once the fob has been opened you can locate the CR2032 3V battery and remove it. Place a new battery in its spot and connect the fob.

Note: Some older Volvos use a different type of battery, the CR2025. CR2025 batteries are 7 tenths of millimeters thinner than a CR2032 battery, which means you'll need to be extra careful when placing the battery of the replacement.

Follow these guidelines to change the battery in your Volvo. Contact Jennings Volkswagen if you have any questions. Our team of experts is eager to assist. We also have a full service department that can take care of any auto repair or maintenance you may need. Book your appointment now!

How to unlock the Key Blade that is Hidden Key Blade

The keyfobs of Volvo have evolved in recent years. They are more than just a remote to start and lock your car. They can also open the windows and provide an extra boost when you need it. To unlock the full potential of your key fob, first you will have to learn how to use it.

Your key fob comes with a transponder which has been programmed for your Volvo. When you insert it into the ignition barrel an antenna reads its code and compares it to the one that is stored in the start inhibitor module. If the codes don't match and your car doesn't start, it won't. This is an important security measure to stop your Volvo from starting if the wrong key is used.

You'll have to take your key with you to a dealership to have it replaced. Your vehicle will also be reprogrammed. This process can take between 5 and 10 days and will cost you a significant amount of money. Fortunately, there is an alternative to cut out some of this expense by programming the system at home. You can find the necessary information in your owner's manual or on the internet. Remove the logo and nonlogo covers and lay your key fob on an uncluttered surface. Find the grey button in the upper right corner of the fob, and push it down. This will let the cover open to reveal the CR 2032 3V battery.