Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are durable, long-lasting and easy to maintain. They don't rot or rust like timber and aluminum.

It is important to clean and oil UPVC windows and doors on a regular basis. This will prevent unnecessary repair costs as well as improve energy efficiency.

1. Broken Glass

The broken glass in your windows could cause severe damage to your home and even be fatal. It is important to take the time to make sure that you're doing everything you can to ensure that your windows are in good condition.

For single pane windows it can be relatively simple to replace windows, and the new one is usually able to fit into the old frame very easily. However If you have double pane windows that are anchored by internal beading, it will be more difficult to take out the old panes and put in new ones. In this instance you'll need find some plastic spacers that will assist the new pane to fit perfectly into the frame of the window.

If you are going attempt to remove the window panes by yourself it is crucial to wear the proper safety gear that includes gloves with a thick layer of material and upvc window Repair protective eyewear. You should also lay down a dropcloth before you begin working on the window panes so that any shards fall onto the fabric and not on the floor which could cause them to be trampled under.

After the glass has been removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to stop water and drafts from getting into the property until a professional comes out and repair the window. It also acts as a barrier that will prevent any intruders from getting access to your home. If the gap is particularly large, Upvc Window Repair you might want to consider using the security door with an integrated window as it will provide the best of both worlds.

2. Sagging

uPVC windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber windows made of sash. However, over time, they may be afflicted by a variety of problems including sliding. A sagging uPVC windows could cause issues with light, draughts, and even security. If you notice that your uPVC window is beginning to sag it's crucial to act fast to prevent the problem from worsening.

To fix a window that is sagging you can try repositioning the hinges. To do this, you'll need to open the window to get to the frame. With an screwdriver, unscrew the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after you've moved your hinges. If you're satisfied with the fit, you can tighten the screws to ensure that they remain in position.

If you are unable to move the hinges, you may need to replace the seal. As time passes, rubber seals lose their elasticity and become dry which causes their tightness to decrease. It is crucial to replace your seal as soon as you can in order to ensure that your uPVC window watertight and draughtproof.

uPVC handles could also become loose. Often this is due to screws that have become loose over time. However, it could be due to the fact that the handle mechanism has been worn out. It's relatively simple to fix a loose uPVC handle. First, you'll need to close your window and do an initial test to ensure that it fits. The joint at the corners of the sash should be aligned with the joint on the casing. If it isn't, you can use a screwdriver or a wrench to loosen the handle and reverse the mechanism back into position.

3. Water Leaks

If you wake up to wet floors and mouldy walls every time it rains it's important to take action. Water leaks from windows not only lead to the degradation of your home's structure but also hamper your efforts to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is a relatively easy fix and should be undertaken by any competent DIYer. Depending on how serious the issue is, the old caulking might need to be removed. It is important to keep in mind that when it is about uPVC window repairs you should not be tempted to 'over-caulk and then make the area harder to clean and reduce your energy efficiency.

Verify that the drainage holes have no debris inside them and ensure that the sill pan has been angled correctly to drain away from the window. In more extreme cases, you may need to replace the window.

Mold spots and rotted sills are other signs of water leakage. This mold thrives in damp environments and can quickly spread throughout the home.

If the leakage occurs between the double glazed window repairs-glazed glass it is more likely that the issue is more related to the seal, not the frame. Again this can easily be corrected by a uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault for the reason that your Upvc window Repair window is difficult to open or if it blows open with an ease. They can be easily repaired by any skilled DIYer and can be completed in just a few minutes.

Like all mechanical parts hinges are prone to wear out over time. The process of replacing a hinge on a window is an easy process, but it's easier if you have someone to help hold the frame up.

It is also important to verify that the uPVC hinges are being opened and closed in the correct direction. You can do this by checking for the arrows on each hinge. This indicates which way the window should be opened.

The issue could be caused either by opening the window repair improperly or by a poor installation in the factory. Sending us a photo through our website can often resolve the problem. We are always happy to offer assistance.

Regular lubrication of hinges is also essential. Applying a light engineering lubricant to the hinges is an ideal method of doing this. We suggest using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window operate and close more smoothly. It can also prevent corrosion and reduce the risk of sticking. This should be done at least every year. WD40 and other solvent based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by a variety of different things. The hinges can also become disaligned as a result of wear, which can cause a gap where the sash and frame meet. If they are beyond repair, it may be required to realign them. The interlock may be disaligned. This is located on the hinge's side, and may need to be cleaned. In some instances, it may be necessary to replace them.

The second most frequent cause of draughts is the window seals. These can become worn down or damaged over time and will allow air to escape through the gaps. Replacement of these with high-quality weatherstripping is a good way to prevent draughts. Another alternative is to replace the window with glass that is low-emissivity, this will help in regulating indoor temperatures and will reduce the risk of draughts.

The last way to reduce draughts effectively is by using a Draught-excluder. These are typically fabric tubes filled with a filler which can be hung over your window sill. They will help stop cold air from entering and keep your home warm and cozy!

With a little maintenance and repair your windows made of upvc will provide an excellent level of security and insulation for your home. It is essential to remember that all windows will eventually wear out and it could be more cost-effective to simply replace them instead of fixing them. So, if you're having issues with your upvc windows, it is always best to seek professional assistance as soon as you can.