How to Replace upvc window Handle a UPVC Window Handle

If your window handle made of upvc is damaged, don't panic. Replacing a window handle made from upvc is an easy task and can be completed in just a few steps.

No matter if you have an in-line or a cranked espagnolette window handle each one has an oval spindle protruding out of the back plate. This spindle is then placed into the locking device.

Determine the type of lock and handle

Over time, window handles or locks may be damaged and lose their function. The good thing is that this can often be repaired without replacing the entire window unit made of uPVC. One of the first things you need to do is identify the type of lock and handle you have because this will help determine what parts will be required for replacement.

Identifying the kind of handle is done by looking at the handle's base. A screw or pin is what holds the handle to its base. If the screw is missing, this can be an indication that the handle has broken off from its base section. If the handle is split internally and doesn't hold the spindle any longer, it may also be a sign that the handle must be replaced.

There are a variety of different types of uPVC window handles however the most popular is the Espag handle. They are typically fixed using two bolts and the spindle works with the locking mechanism of the window frame. These handles are used on uPVC tilt and turn windows.

Another kind of uPVC window handle is the Cockspur handle. They're similar to Espag handles, but have a lower projection from the frame. These handles are generally used on older uPVC window frames.

Venetian window handles are another alternative. They are similar to Espag handles, but they have an elongated bottom that lets them to be positioned in a flush position with the frame. These are a great choice for homeowners who want an elegant, stylish handle that will blend in with their uPVC window frames. The handles are also available in a broad variety of colors to match any style.

Measure the spindle

It is crucial to be aware of how the handle fixed before you purchase an replacement. This will tell you whether it's tight enough or loose, and if it will fit into the window frame. This can be determined by identifying the handle type and measuring the spindle. The spindle is the metal shaft that connects the handle to the lock within the window frame. The spindle comes in a variety of sizes. The current industry standard is 8mm. Older handles may have a cross-section of 9mm, so it's crucial to take measurements of the old handle to ensure you get the right size replacement.

There are a variety of window handles, but the most popular are inline Espagnolette and the cockspur handle. They operate an locking mechanism within the window, using shootbolt rods which secure the window when it's closed. They are held in place by pins or screws depending on the kind of handle you have.

You can find replacement upvc window handles online and in most DIY stores. They are available in a variety of finishes and are suitable for new or replacement windows. For added security, they can be either key-locking or non-locking fire-escape.

To remove your old handle simply open the window and remove the screws that hold it in place. Place the screws in a container to prevent damage. Once the screws have been removed, carefully remove the handle and take a measurement from the base to the top of the spindle. This will provide you with the information you need to buy the correct replacement sash windows. The handle's spindle is the metal shaft that connects it to the lock gearbox in the window frame.

Remove the old handle

The replacement of the handle of an uPVC handle is a straightforward job that takes less than five minutes, if you have the appropriate tools. The first thing to do is determine the size and type of the handle or lock. This will allow you to determine the best replacement. After that, weighing the spindle will ensure that the new handle is a suitable to the existing one. The handle that was used previously needs to be removed and replaced with the new one.

Most uPVC handles come with inline Espagnolette handles. These handles have an internal spindle that slots into the locking mechanism on the window. They are generally simple to remove, Replace Upvc Window Handle however you may have to apply force if they're stuck. The handle is usually held in place by two screws which can be removed with the aid of a screwdriver. You may also need to remove pins, depending on the type of handle.

After removing the screws you can take off the old handle. The top of the base plate will be visible when the handle is in an open position, showing two screws you can unscrew. If the sticker remains in place, you'll need to take it off.

It is now possible to screw into the new handle using the screws that came with the old handle. The screw holes should be aligned on the window to the holes in the handle. Once you've completed this you can replace the cap screws. Test the new handle. The replacement of a uPVC window could be a quick and simple task, but you need to ensure you complete it in a proper manner.

Install the new handle

It's time for you to install your new handle if you have successfully removed the old one from the frame. Begin by locating and removing the screw covers with your screwdriver. Once the screw covers have been removed, place them in a safe place before proceeding to the next step.

Then screw the spindle in by aligning it with the hole that is already in place. Make sure that the holes in the handle with the ones in the window frame. Use a screw of the same size as the one used previously.

The uPVC Espag handle comes equipped with a spindle that is 7mm square that rotates the lock mechanism on the window. This kind of handle can be found in most modern uPVC windows. uPVC Cockspur handles (also called Cotswold handles) have long noses that lock over the outer frame or transom bar cross member. They are typically found in older windows made of uPVC.

Once the new handle is installed, it's crucial to ensure that it operates properly by locking and unlocking the window several times. If everything goes according to plan, the new uPVC handle should be properly attached and running smoothly. If not, the above steps will help you diagnose any issues and get it fixed quickly. If you're having trouble with your uPVC handle or any other issues with your home improvement using glazed don't hesitate to call us at Bridgewater Glass for professional assistance. Our glaziers have been trained to repair or replace windows with a variety of frames and handles making us a good option for your double glazing requirements.

Test the new handle

In time and with regular use, uPVC handles and locks can suffer from damage and wear and tear. They can become less secure and efficient which is why it's crucial to replace them as soon as you can. It's also an ideal idea to do this after you upgrade your windows, since changing the handle and lock will ensure the security of the windows you have just bought.

There are a variety of uPVC window handles. Some are fixed to the frame with pins or screws, while others have blades which slide into the lock mechanism. Each type has a distinct method of replacing it, so you need to know what type you have.

The most common type of window handle is called the espag. They're usually found on the latest uPVC Windows. The spindle extends from the handle to the lock gearbox and activates the locking system when you open the window. They are also easy to take off however you should take care not to damage the mechanism or the handle while doing so.

Cockspur handles are another alternative to uPVC window handles. They're secured by a spur that is snagged onto a wedge-shaped striker plate on the frame. When you shut or tilt the window, it triggers the locking mechanism. This kind of handle is more difficult to repair than other types however, it's still an excellent choice for the majority of homes.

Venetian handles are attached by two bolts, and they have a narrow projection on the frame. This is different from the Espag handle. These handles are ideal for those who want to have a flush handle which blends in with uPVC window frames. These are perfect for commercial and residential properties.