How to Replace a Nissan Juke Spare Key

Nissan Juke is a fun and stylish hatchback, with an unusual engine setup. It's quite noisy however it's still a fun car to drive.

Replace the battery in the key fob of your Nissan Juke every two years or when it is low. You can do it yourself, but you'll need a few tools.

Dead Coin Battery

If your Nissan Juke key fob isn't functioning the first thing you need to examine is the battery within it. It could be dead and need to be replaced, which is a straightforward fix that takes just less than a minute. Flip the fob upside down and you will be able to access the small latch/release in the back. Remove the battery from the old one and then replace it with the new one, making sure that it is facing down in the fob and line between the two halves of the fob in a careful manner.

If the fob was exposed to water, it will need to be cleaned prior to putting the new battery in. You can clean the fob using isopropyl or electronic cleaner and paper towel. Then, allow it to dry completely prior to reinstalling the battery.

To start the car the key fob needs to be paired with the car. This can be done by following the instructions in the owner's manual or by using an OBDII scan. The most likely reason why the key fob stopped working was because it was not linked to the car. A damaged chip in the fob can cause it to stop working however this is not a common occurrence. A new receiver module might be required in this scenario. If this is the situation it must be replaced by a professional technician.

Water Damage

A key fob is powered by batteries, and the batteries require replacement every two years or more, or at the first sign of the car not responding when you press the "start" button. The keys' rubber seals keep water out, but submerging the key fob in the ocean or in pool water can damage the electronic chip. If this happens, Nissan Juke Spare Key you will need to obtain a new key from Nissan or an automotive locksmith.

If the key's chip is an operating chip, it's likely that the computer has simply lost its connection to it, which can occur for a variety of reasons. A simple restart of the vehicle could fix the issue, however if the key is still displaying the "Key ID" error message, you'll need to contact nissan qashqai replacement key or an auto locksmith for assistance.

Three common causes are dead key fob battery or a key that's not programmed, or damaged key fob. The first two are relatively simple to fix, while the latter is a bit more difficult to fix in the moment, but it is generally fixable with a bit of patience. Compare Nissan Key Replacement prices in your area with WhoCanFixMyCar and book your repair online. You can read customer reviews about local Nissan dealerships, Nissan mechanics, and garages in just a few moments.

Faulty Chip

The key fob in your Nissan Juke has a special chip that sends an indication to the car every time you turn it. If the chip is defective, Nissan juke spare key it can cause the key to stop working. In this instance, you can only fix the problem by replacing the key. There are a myriad of reasons your Nissan Juke's key could be defective, such as water damage, a dead coin battery, or a broken receiver module.

If your key fob stopped working after an immersion in the wash or even a bath, you should check the chip for damage from water. Check that the metal clips holding the chip are tight. Also, make sure the chip isn't in contact with water. If you see any signs of water damage, try removing the battery and then wiping the electronic component using isopropyl alcohol or an electronic cleaner.

If the chip is damaged If the chip is damaged, you'll have to contact your local locksmith or dealer. To locate a replacement, they will require the year, model and year of your car. It is also necessary to write down your VIN (Vehicle ID Number) so that the dealer or locksmith will know what key you have. This will allow them to search for the correct key code and ensure that they are cutting the right one.

Faulty Receiver Module

The key fob transmits a radio signal to your car to perform various functions. The key fob is able to unlock your trunk as you rush to get groceries or even start your car by pressing the fob's button. It can also open your windows and turn on the horn in the event that you lock the keys in your car.

If the key fob doesn't function, it could be due a problem in the receiver module. The receiver modules are tuned to ensure that they can receive specific frequencies that correspond to signals transmitted by Nissan key fobs. A faulty receiver module will stop your car from responding to the signal sent by the key fob in Nissan.

It is always best to have an extra Nissan key fob in case your original key gets lost or breaks. A spare key can be programmed by a locksmith or dealership to work with your Nissan and can assist you in avoiding the difficulty of locking your keys inside your vehicle or losing them.

If your Nissan Juke's key fob has been exposed to rain or clean tap water, you can resolve the issue by cleaning it with isopropyl or an electronic cleaner. If the chip is fried and you need to buy a new key fob, which can be programmed to your car through a locksmith or dealer.