Peugeot 308 Key Fob Replacement

Peugeot's 308 might seem somewhat old-fashioned but it's eye-catching. It's not the most luxurious vehicle in its class, but it's an enjoyable and relaxing driving experience.

We often receive requests from Coded Car Keys to replace peugeot key fobs. No matter if the issue is ongoing or continuous the following tips will aid.

Water Damage

When you accidentally leave your fob in the midst of a puddle or get it wet when kayaking, swimming, canoeing, rafting or canyoning, it's likely to sustain water damage. Keep your key fob in a dry bag every time you go outdoors or do things that expose it to large amounts of water.

It is also important to make sure that the fob is completely dry before opening it up and re-using it. If you smell any odors emanating from the fob (such as industrial liquid or windshield washer fluid) it is a indication that it's been submerged.

A wet circuit may cause the battery's energy to drain or even explode. If you are able to get your 308 keyfob out of the water it is best to turn the button side up and shake as much water as you can before opening the casing. Once you have opened it, take off the battery, and then clean the circuit board using an alcohol-soaked cotton swab. 90-percent isopropyl alcohol.

Other causes why your peugeot 207 key 308 remote entry keyless system might not function include a dead coin cell battery, receiver module problems signal interference, peugeot Key or a faulty chip. If none of the above are the cause, you can try resetting the system by disconnection of the battery that is 12 volts for approximately 15 minutes.

Dead Coin Battery

Peugeot cars come with a remote-start system which allows the driver to start the car from a distance and then warm up or cool down the vehicle prior to entering. This feature is extremely helpful, especially during winter's cold and chilly months. Remote start systems may cease to function for a variety reasons, including an inactive coin-battery.

The coin-shaped battery located inside the key fob will last between two and four years, based on how often it is used, the location it was purchased, and the way it is utilized. The date of use is typically written on the package or in the manual.

If the key fob stops working after exposure to water that is clean then you must remove the battery, clean the chip using a paper towel and isopropyl alcohol, then dry it thoroughly before replacing it. If the key fob has been exposed to salty or soapy water, it may have fried the chip. You will need to replace it.

If you're not sure the battery is faulty it is possible to test its voltage with a multimeter set to the car's voltage range. Connect it to the plus and minus terminals. If the voltage is less than 12-13 volts, it is time to replace the battery. You can also reset your onboard computer by disconnecting and reconnecting the 12 volt batteries in reverse order. (positive cable first, then negative cable). The engine should begin to run after this.

Faulty Receiver Module

If you don't see the "Key Detected" you might find that your receiver module is not working properly. It's the component that transmits the signal when your key fob is activated. It also functions as an alarm that stops the car from starting if you don't have the correct key.

This could be due to a number of factors including water damage or simply the aging process. If your Peugeot 308 key fob was exposed to dirty tap water, for example the electronic chip located inside may be damaged. In this scenario it is necessary to take the device apart and clean it thoroughly with isopropyl alcohol, or electronic cleaner. Once it's dry you can put the battery back in and test it again.

If the problem persists it is recommended to visit an area Peugeot expert or locksmith. They will be able to utilize a diagnostic tool to help pinpoint the issue and fix it.

The loss of your Peugeot car keys can be a stressful experience. A reputable auto locksmith will be able to solve the problem within minutes. They can cut a new key for peugeot 207 key and programme it to your vehicle, making sure you're out on the road in the shortest time possible. Click here to find a local locksmith near you.

Faulty Electronic Chip

The chip inside your Peugeot 308 key fob is a very vital component of the remote control system. If it becomes damaged, your car may not start, or you could receive a message saying "anti-theft active". If this occurs, the only option to fix the issue is to obtain a new key. Professional auto locksmiths are able to provide the service in the shortest time.

The chip inside your Peugeot 308's key fob could be damaged due to various reasons, such as water damage, sweat or dirt. If your Peugeot key fob has been exposed to soapy or dirty water, it should be cleaned as soon as possible. You can wipe the electronic component with the help of a towel that is soaked in isopropyl Alcohol. The battery should then be allowed to fully dry.

Sometimes keys may not function due to radio interference. This could be caused by other devices that operate on the same frequency as your Peugeot key fob. This can be caused by unsafe conditions or objects that are close to the vehicle. If you experience this problem you should visit an Peugeot dealership.

The Peugeot Key Fob 207/308 is delicate and requires special care. It is important not to drop or throw the key fob. If you lose it, try to find it as quickly as is possible. You can reset all the on-board computers by disconnecting the battery that is 12 volts for a few minutes. Remove the negative cable before the positive.