Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are long-lasting, durable and easy to maintain. They are not susceptible to rot or rust like timber and aluminum.

It is crucial to wash and oil UPVC doors and windows on a regular basis. This will reduce unnecessary repair costs and increase energy efficiency.

1. Broken Glass

The broken glass in your windows could cause significant damage to your home and may even be fatal. You should take the time to make sure that your windows are in good working order.

For single pane windows, it is fairly easy to replace them, and the new window is usually able to fit into the frame of the previous one easily. If you have double-paned windows that are held together by internal beading, it will be difficult to remove and replace the panes that were previously in use. In this instance you'll need source some plastic spacers that will assist the new pane to fit correctly into the frame of the window.

If you plan attempt to remove the glass panes yourself, it is essential to wear the proper safety gear such as gloves that are thick and protective eyewear. It is also a good idea to lay down a dropcloth before you begin working on the glass, so that any fragments of glass fall on the fabric rather than on the floor where they could be trampled on and cause further damage.

It's a good idea to cover the gap with tape after the glass has been removed. This will stop drafts and water from getting into your home until a professional is able to repair the window. It also acts as a barrier, deterring any intruders from gaining entry to your home. If the gap between the door and the window is significant, you may want to use a security screen that also includes a window. This will provide the best of both.

2. Sagging

Upvc windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber windows with sash. In time, they could develop a variety of issues such as sagging. A sagging window can cause problems with light, draughts or upvc window repair even security. If you find that your uPVC window is beginning to lose its shape, it is important to act swiftly to stop the issue from worsening.

Repositioning the hinges could help fix a window that is sliding. First, you'll need to open the windows to access the frame. After that, using an screwdriver, unscrew the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've repositioned the hinges, close the window and test it for fit. If you're happy with the fit, tighten the screws until they stay in position.

If you can't reposition the hinges, you may need to replace the seal. As time passes, rubber seals lose their elasticity and dry out and cause them to loosen. If this happens, it's essential to replace the seal as soon as you can to ensure that your uPVC windows are watertight and safe from drafts.

uPVC handles may also become loose. This is typically caused by screws that have been removed over time, but it could also be due to the handle mechanism wears out. It's fairly simple to fix a loose uPVC hand. You'll first need to close the window and then perform an experiment fitting. The corner joints of the sash need to align with the casing joint. If it isn't, you can use the screwdriver to loosen the handle. Then, turn the mechanism back into place.

3. Water Leaks

It is important to take action if wake up every morning to discover mouldy walls and floors that are wet. Water leaks through windows can cause structural damage to your home and hinder your ability to control the temperature of your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is an easy fix that can be accomplished by anyone who is a DIYer with the skills. Depending on the severity of the issue is, old caulking may need to be removed. It is essential to remember that when it comes to upvc Window Repair window repairs, do avoid the temptation to "over-caulk' as this will only make the area harder to clean and can reduce your energy efficiency.

It is essential to ensure that any drainage holes are clear of debris and that the sill pan is angled in a way that allows it to drain away from the window. In more severe cases, you may need to replace the window.

Mold spots and rotted sills are other signs of water leakage. The fungus thrives in damp conditions and can quickly spread throughout the home.

It is also important to remember that if the leakage is coming from between the glass of your double glazed window repairs glazed windows, it's more likely to be a problem with the glass seal, rather than the frame or sliding. A uPVC specialist can easily solve this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or loose and blow open with a breeze It could be the hinges that are at fault. They can be easily repaired by any DIYer who is skilled and can usually be completed in a matter of minutes.

Like any mechanical component hinges will be damaged over time. It's easy to replace a hinge on a window but it's much easier if someone helps you hold the frame.

It is also important to verify that the uPVC hinges are being opened and closed in the right direction. Look for the arrows that are on each hinge to determine which direction the window should be opened.

The issue can be caused due to opening the window in the wrong way or a faulty installation in the factory. Sending us a picture via our website is often enough to resolve the problem. We are more than happy to offer assistance.

It is also essential to lubricate the hinges regularly. This can be done by applying a light engineering oil on the hinges. We recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also lower the possibility of a window sticking and help prevent corrosion. Ideally, you should do this once a year. WD40 or other solvent-based oils should not be used as they could damage your uPVC windows.

5. Draughts

Draughts can be caused by different things. The hinges can also be unbalanced due to wear, creating gaps where the sash and frame meet. They can be fixed by giving them a thorough clean, however if they are beyond repair it may be necessary to get them realigned or replaced. The interlock may be misaligned. It is located on the hinge's side, and may need to be cleaned. In certain instances it is possible to replace them.

The seals may wear out or become damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the window with low-emissivity glass, which will help regulate indoor temperatures and again will reduce the risk of draughts.

The final method to cut down on the amount of draughts is to use a draught-excluder. These are usually made of fabric tubes filled with a filler, which can be hung over your window sill. They will keep your home warm by blocking cold air.

With a little maintenance and repair windows made of upvc will provide an excellent level of security and insulation for your home. It is crucial to recognise that windows last for a certain period of time and eventually, they will reach a point where it is more economical to replace them than fix them. If you are experiencing issues with your window made of upvc it is recommended to speak with an expert immediately.