Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are easy to maintain, durable and long-lasting. They don't decay or rust as aluminum or timber.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will help avoid unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window has been damaged, it can cause a huge deal of damage to your home, making it very hazardous and possibly fatal. It is important to take the time to ensure that you're doing everything you can to keep your windows in good shape.

For single pane windows it is fairly easy to replace them, and the new window is usually able to fit into the frame of the previous one easily. However, if you have double-pane windows that are secured by internal beading, it will be more difficult to remove the old panes and put in new ones. In this situation, it is necessary to purchase plastic spacers in order to make sure that the new pane fits into the window frame.

Wearing protective eyewear and thick gloves is a must if you plan to remove the glass yourself. It is also recommended to lay down a dropcloth before you start working on the glass to ensure that any shards fall on the fabric rather than on the floor where they could be trampled on and cause further damage.

Once the glass is removed from the window, it's best to seal the gap with clear packaging tape or duct tape to stop drafts and water from entering the home until a professional can come out and repair the window. It also acts as an obstruction to prevent intruders from making their way into your home. If the distance between the door and the window is significant, you may need to consider security screens that has an opening. This will provide the best of both.

2. Sagging

uPVC windows and doors are a low-cost, durable and energy-efficient alternative to timber windows with sash. As time passes, they may be affected by a variety of issues such as sliding. A sagging window can cause problems with light, draughts or even security. If you find that your uPVC window is beginning to sag it's crucial to act fast to stop the issue from worsening.

Repositioning the hinges could aid in fixing a window that is sagging. To accomplish this, you'll need to open the window so that you can get to the frame. You can then unscrew both the top and bottom hinges with a screwdriver and adjust them counter-clockwise or clockwise. Close your window to test the fit after you've relocated your hinges. If you're satisfied with the fit, tighten the screws until they stay in the right place.

If you are unable to move the hinges, you may need to replace the seal. As time passes, rubber seals lose their elasticity and dry out which causes them to loosen. It is essential to replace your seal as quickly as you can to ensure that your upvc window repairs window watertight and draughtproof.

UPVC handles can also become loose. This is often caused by screws that have loosened over time, but it could also be caused by the handle mechanism wearing out. It's fairly simple to fix a loose uPVC hand. First, you'll need to close the window and window Repairs then perform an initial test fit. The joint at the corner of the sash should align with the joint on the casing. If it isn't, you can use a screwdriver or a wrench to loosen the handle and then return the mechanism to its original position.

3. Water Leaks

It is essential to take action if you awake each day to find a smoky wall and wet floors. Water leaks from windows not only lead to the degrading of the structure of your home but also hamper your efforts to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is a simple fix that can be accomplished by any DIYer who is competent. Depending on how serious the issue is, old caulking may have to be removed. It is important to keep in mind that when it is about uPVC window repairs, you should avoid the temptation to "over-caulk and then make the area harder to clean and can reduce your energy efficiency.

It is important to check that any drainage holes are free of debris and that the sill pan has been angled in a way that allows it to drain away from the window. In more severe cases, you may need to replace the window.

Other indicators of long-term water leakage include rotted sills and the appearance of black spots of mold on the wall near the window. This mold thrives in damp environments and can quickly spread throughout the house.

It is also important to keep in mind that if the leakage is coming from between the glass of your double glazed windows, it is more likely to be a problem with the glass seal rather than the frame or sliding. A uPVC specialist can easily fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be at fault for the reason that your uPVC window is difficult to open, or if it opens with the breeze. They can be easily repaired by any skilled DIYer and can usually be completed in a matter of minutes.

Like all mechanical parts, hinges can wear out over time. It's very simple to change the hinges on a window however it is easier if someone helps you to hold the frame.

It is also important to ensure that the uPVC hinges are being opened and closed in the correct direction. This can be done by looking for the arrows on each hinge. This shows which way the window should open.

The issue can be caused either by opening the window incorrectly or a faulty installation in the factory. Sending us a picture through our website can often resolve the problem. We are happy to give advice.

It is also important to ensure that the hinges are lubricated on a regular basis. Applying an engineering lubricant that is light to the hinges is an ideal way to do this. We recommend using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also lower the risk of a window sticking and prevent corrosion. This is recommended to be done at least once a year. WD40 and other solvent-based lubricants are not recommended as they could damage parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by a variety of different things. First, the hinges due to wear and tear could become misaligned. This can cause an opening to appear where the sash joins the frame. If they are beyond repair, it could be necessary to have them realigned. In addition, the interlock could also become disaligned. This is located on the hinge's side and may need to be cleaned. In some instances it might be necessary to replace these.

The seals may wear out or get damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with glass that is low-emissivity, this will help to regulate indoor temperatures and again will reduce draughts.

One of the most effective ways to reduce draughts is by using a draught excluder. These are typically made of fabric filled with some type of filler. They can be positioned on the top of your windowsill. These will help to stop cold air from entering and keep your home warm and cosy!

Your windows made of upvc will remain a great source of insulation and security for your home with regular maintenance and repairs. It is important to remember that all windows eventually get worn out and it could be more cost-effective to replace them instead of fixing them. So, if you are experiencing issues with your upvc window repairs windows, it's best to seek professional assistance as soon as possible.