Replacement Handles For UPVC Windows

UPVC window handles come in a variety of styles, but all of them operate the same locking mechanism. To replace a uPVC handle, remove the top screw from the bottom of the window handle. This will reveal two screws.

Then, take a measurement of the spindle to ensure your new handle will fit. It is important to know the type of handle you've got as there are many different sizes.

Inline Espagnolette Handles

Most double glazing window replacement-glazed windows come with Espagnolette handles which operate multi-point locks to provide greater security. The handle is operated by an 7mm square spindle which connects to a gearbox inside the window frame. The gearbox rotates the multi-lock mushroom when the handle is turned. They are available in a variety of styles including cranked, inline key locking and cockspur handles and they can also be supplied as sets to replace one handle that is broken or worn out.

Our uPVC replacement handle kits are designed to make it easy to replace a damaged or faulty window handle made of espagnolette. These uPVC handle sets come pre packed with a variety of spindle lengths that will fit the majority of applications. They come with all of the fixing screws required for installation included. These handles also come with key-plugs which allow them to change from the standard open/closed handles to egress or fire escape non locking handles (if when used with the correct key plug).

If you are just looking for an espagnolette handle that can simply replace your existing window handles without changing the position of the mushroom plates, we recommend our Simplefit Inline Espag Handle with 3 Spindles. These handles are designed specifically for this purpose and they come ready to fit with a range of spindle lengths already inserted so you don't need to worry about cutting them down on site. The handles are also a good choice for new build or refurbishment projects due to their excellent value and easy installation.

Yale Sparta Inline Espag Handle is a different choice. It was designed to minimize aesthetic intrusion and has a lower height at the base. It is part the suited hardware range and is available with a variety of finishes that all conform to the requirements of BS EN1670 : 2007 Grade 5. They have been tested for durability and are suitable for use in acidic woods and coastal environments. They are also compatible with cylinder immobiliser inserts that allow you to obtain key-locking status if this is needed.

Cockspur Handles

Commonly found typically on older uPVC and aluminium windows the cockspur handles are a basic latch and catch arrangement. The handle's nose slides into or into the catch which is a plastic wedge block placed on the window frame. Since the wedges come in different sizes, it is essential that you know what step height you will need before buying a new handle. As a rule Upvc windows typically have a step size of 21mm and aluminium frames usually come with a handle step of 9mm.

A cockspur handle can be locked with the key, which provides additional security for your home. The lock is fitted to the handle with spindles that fit into the handle via the lock hole (also known as a backset). The spindle measures 7mm square and can be used to open or close the window.

It is essential to make sure that the new cockspur handle is the same height of the original. Usually, this measurement is taken from the bottom of the spur on the handle to the underside of the handle's nose. This measurement is often referred to as the backset or stack height, and it is vital to know this information before you purchase a handle.

Cockspur handles can be straight/universal or cranked, and are available in left hand or right handed versions. This is to allow the handles to be fitted onto windows that open to the left or right and to allow the user a better access to the window.

It is crucial to determine whether or not your window is required to have a restrictor, which is designed to prevent the handle from being opened past a certain level. Generally speaking, they are required for high rise flats or commercial properties for safety reasons. However, the majority of homes do not require them.

There are a number of different styles and colours of the cockspur handle, such as stainless steel brushed and white uPVC. Choosing the best one for your windows will be based on your personal taste and style, as well as how you would like the window to perform.

Tilt and Turn Handles

Tilt and turn handles are a popular style of handle that are typically found on double glazed windows in the UK. They can be found on both upvc and timber windows. The handle is typically placed at 90 degrees, but it can also be turned at 180 degrees. This permits the window to be opened to the room fully, and also to lower to let air circulate. The handle is locked in this position and requires the use of a key to unlock it when needed.

This kind of handle can be easily replaced, as it only has one large handle and replacement Handles for upvc windows not multiple smaller ones. This makes it less obvious the handle and is more in line with contemporary minimalist design trends. They are also much easier to clean as they open inwards.

Another advantage of tilt and turn windows is that they are 4 - 8 times stronger than casement windows. This makes them ideal for larger windows and doors. The frames are made from steel cores which adds strength and durability.

The tilt and turn mechanism is also safer than a casement window, as the handle can be locked at any angle. This is particularly important in areas where children might live, since it will stop children from opening the window.

Many homes opt for tilt and turn windows as they can be used in various ways. They can be opened horizontally like windows that are regular, lowered down in a hopper fashion to provide ventilation, or tilted backwards to allow for cleaning and maintenance. This is a great option for those who wish to increase airflow and lessen the sound in their home. They are also easy to clean and maintain, since the glass is removed. These windows are available in a wide range of sizes and colors. They are ideal for any house and can be paired with both traditional and contemporary styles.

Crank Handles

Crank handles require minimal effort to open, and allow for replacement handles for upvc windows a spectacular view of the outdoors without obstructing the glass. These handles are usually used on casement windows that are hinged on the side or awning windows. They feature mechanisms that are similar to a window bar and a linkage arm that supports the window sash. The window sash can be opened or closed when you turn the handle clockwise. In contrast to other types of handles the mechanism of a crank window and handle are usually subject to significant wear and tear that can cause the gears to strip and the handle to stop functioning or fall off the operator shaft. Regularly inspecting the handle as well as the operator mechanism will ensure that they are in good shape for many years.

A crank handle is made up of a shaft made of metal that rotates perpendicularly, and is attached to an arm. The handle is rotated in a circular direction by grasping it and rotating it in the same way that you operate a sharpener. In certain situations the handle could be operated by the leg.

The base of the crank handle is hollow. This hole permits the handle to be connected to equipment and machinery. The handle's arm also has a connecting rod, which converts the circular motion the handle into a rotary or reciprocating motion, which is used to operate machines and equipment.

Boats are often transported on trailers using crank handles, in addition to adjusting equipment and machinery. They are typically made from stainless steel that is resistant to corrosion in marine environments. Because of this, most boat crank handles are coated with powder to protect them from rust and to make them easier to clean.

Replace the crank handle when it ceases to function or does not open the window. Before you do that check for trim mounting screws inside the window frame's track for screen. If there aren't any, you can try to loosen the casement cover with a stiff putty knife by sliding it between the window jamb as well as the frame and pulling on it. If it doesn't work, you can take off the cover and get access to the crank mechanism by uncreasing the screws on the window frame.