Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are durable, long-lasting and easy to maintain. In contrast to aluminium and timber, they are not susceptible to corrosion or rot.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will reduce unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows can cause significant damage to your home, and could even be fatal. It is essential to make sure that your windows are in good shape.

For single pane windows it can be relatively simple to replace windows, and the new one is usually able to fit into the old frame very easily. If you have double-paned windows which are joined by internal beading, it is harder to remove and replace the old panes. In this case it is essential to purchase plastic spacers in order to make sure that the new pane fits into the window frame.

Wearing eye protection and thick gloves is essential if you plan to remove the glass by yourself. You should also lay down a drop cloth before you begin working on the window panes so that any shards fall on the fabric, not onto the floor, where they could be trampled under.

Once the glass has been removed and the glass is removed, it's a good idea to cover the gap with clear packaging tape or duct tape to block drafts and water from entering the home until a professional can come out and repair the window. It also acts as a barrier, preventing any intruders to gain access into your home. If the distance between the window and the door is large, you might prefer a security screen that also has windows. This will provide the best of both.

2. Sagging

uPVC is durable energy-efficient, Upvc Window Repairs cost-effective and economical alternative to timber sash windows. However, over time they may be afflicted by a variety of issues like sagging. A sagging window can cause problems with light, draughts or even security. It's important to take action as soon as you realize that your upvc window repair near me windows are sagging.

Repositioning the hinges could aid in fixing a window that is sagging. To accomplish this, you'll have to open the window so that you can access the frame. You can then unscrew both the hinges on the top and bottom using a screwdriver, and then adjust them counter-clockwise or clockwise. Close your window to check the fit after having relocated your hinges. If you're happy with the fit, tighten the screws until they remain in place.

If you are unable to reposition the hinges, you may have to replace the seal. Over time, rubber seals lose their elasticity and dry out, which causes them to lose tightness. It is essential to replace your seal as soon as you can in order to keep your uPVC window watertight and draughtproof.

uPVC handles can also loosen up. This is typically caused by screws that have loosened over time, but it could be due to the handle mechanism getting worn out. It's relatively simple to fix a loose uPVC hand. First, you'll need to close the window and then perform an initial test fit. The corners of the sash should align with the casing joint. If it does not, you can use the screwdriver to loosen up the handle. Then turn the mechanism into position.

3. Water Leaks

It is essential to take action if you awake each day to discover mouldy walls and wet floors. Water leaks from windows are not just a cause for degradation of your home's structure but also undermine your efforts to regulate the temperature within your home. The most common reason for leaks in uPVC windows is that the sealant surrounding the frame is damaged or is missing.

This is a simple fix that can be done by anyone who is a DIYer with the skills. Based on the severity of the problem the caulking that was used up might need to be removed before a new layer is applied. It is essential to remember that when it is about uPVC window repairs, you should not be tempted to 'over-caulk' as this will only make the area harder to clean and reduce the efficiency of your energy.

Verify that the drainage holes do not have debris in them and ensure that the sill pan has been properly angled to allow the water to drain from the window. In more serious situations, you may need to think about replacing the window.

Mold spots and rotten sills are other signs of water leakage. This fungus thrives in damp conditions and can quickly spread across the home.

If the leakage is occurring between the double-glazed window, it is more likely that the problem is with the seal rather than the frame. Again this can easily be corrected by a uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason for the reason that your uPVC window is difficult to open or it opens in an ease. These are easily replaced by any competent DIYer and are usually completed in a matter of minutes.

Like any mechanical part hinges will wear out over time. The process of replacing a hinge on a window is essentially a very simple process but it can be easier with someone else to assist in holding the frame up.

Verify that the uPVC hinges open and upvc window repairs close in the proper direction. You can do this by looking for the arrow on each hinge. This indicates the direction in which the window should be opened.

The issue can be caused by opening the window improperly or due to a poor installation in the factory. Sending us photos through our website can often solve the issue. We are more than happy to offer advice.

Regularly lubricating hinges is also essential. This can be accomplished by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can allow the window to open and close more easily. It can also prevent corrosion and reduce the risk of sticking. It is recommended to do this at least once a year. WD40 and other solvent-based lubricants are not recommended as they can damage the parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by various factors. The hinges may also become disaligned as a result of wear, creating gaps between the frame and sash. If they are damaged beyond repair, it might be necessary to get them re-aligned. Secondly the interlock, this is located on the hinge of the window, can also be misaligned, and again it's feasible to give them a good clean, but in certain cases, it may be necessary to get them replaced.

The seals may wear out or be damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the window with glass that is low-emissivity, this will help to regulate indoor temperatures and will reduce the risk of draughts.

The final method to cut down on drafts effectively is to use a draught-excluder. These are usually fabric tubes filled with a filler that can be put on top of your window sill. They will help block out cold air and keep your home warm and cosy!

With a bit of regular maintenance and repairs windows made of upvc will continue to provide a great level of insulation and security for your home. However, it is important to recognize that all windows have a lifespan and eventually, they will reach an point at which it is more efficient to replace them than repair them. So, if you're experiencing issues with your Upvc windows, it's best to seek professional assistance as soon as possible.