Double Glazing Door Lock Repairs

Are you experiencing issues with your uPVC door or double Glazing window mechanism faulty? Perhaps the door or window handles aren't able to connect correctly or are difficult to use.

It's important that your double glazing repair glazed doors work smoothly, otherwise you'll be wasting energy and increase the chance of burglary. Owen the Locksmith will be able to repair your door lock for an affordable price.

Snapped Key

It can be a hassle when a key gets stuck inside a lock. It can also be a security risk, as it may make you vulnerable to burglars if your door does not lock. There are a few easy fixes you can make to repair the issue and make your door work again.

Be sure to remain calm. If you panic you could end up pushing the broken key piece further into the lock.

Then spray WD-40 or another penetrating oil into the lock to make the broken piece slip out more easily. You can also use a screwdriver to break off any pieces that are stuck. If you have a part of the key that is stuck and is not being removed, grab it with a paperclip or another thin metal object and pull it. Both methods work, but you must be careful not to push the damaged key further into the keyway.

Some paperclips have grooved edges that can serve as a hook extractor and some Jigsaw blades can also be used for this purpose. If you don't have any of these handy, Double glazing you can use needle-nose pliers to bend them and create a hook. You can also make use of a pair of tweezers to grasp and pull out the last bit of the broken keys.

If you can't get the broken piece of key out, you can try using a lock de-icer. This is usually available at all hardware stores. It works by freezing any moisture or ice that might be inside the lock.

If none of these solutions seem to work, it might be time to consult a locksmith. The experts at Fitlocks can quickly fix issues such as broken handles or snapped keys with uPVC locks and door mechanisms. They can also reconfigure your double glazing door mechanisms to make them more user-friendly. Book a double glazing repair through us online or give us a call to discuss your needs.

Broken Cylinder

A damaged cylinder poses an extremely risky security issue. It's a good thing that it's a simple repair for a professional locksmith to complete. Locksmiths will need to tap the cylinder to fix it. This can be done with a hammer, or any other tool. However, the most effective method is to make use of a wire or a long match. Then, put the match's end or wire close to the keyway. The locksmith can then strike the lock in order to crack it. This is superior to using a hammer that could cause damage to the lock.

Overheating is the main reason for cylinder heads to crack. This can happen when the cylinder head and block are made of different metals, such as cast-iron or aluminium. When the various metals are heated and cool at different rates, it could create hotspots locally that expand faster than the rest of the cylinder head, leading to cracks.

Another possible cause of cracks in the cylinder is corrosion. When the cylinder head and the block of the cylinder are not maintained properly, this could result in corrosion or rust and cause them to expand at a higher rate than they ought to. This can lead to cracks in the future.

If your uPVC window or door lock is brittle or requires an enormous amount of pressure to turn, it can be the result of many things. A malfunctioning locking mechanism, misalignment, or a worn handle are common causes of this problem.

Fortunately, this is an easy and inexpensive fix for most double glazing owners. A professional locksmith will usually be able solve this problem within an hour of arriving at your home. Depending on your needs, they can replace the locking mechanism, change the window handles, and change the gearboxes. A locksmith with experience will always be able to advise you on the most cost-effective solution for your home. They can recommend upgrading to 3 Star TS007 Euro Cylinders that provide an additional layer of protection from burglars. It's a small price to pay for the peace of mind that comes with knowing your uPVC doors are safe.

Broken Handle

Window handle locks are complex mechanisms that deteriorate as time passes and usage, so it's no surprise they occasionally break. It isn't always easy to pinpoint the reason behind a broken window handle lock and fix it correctly.

Whether the problem is in the internal locking mechanism or the latch, fixing the broken handle will improve your uPVC double glazing door's security and help you to stop the draughts. It could be costly to replace or repair the handle in a way that isn't done correctly. It could also harm the frame and the lock of your door.

With the window open and the window open, loosen the screw holding the handle with a screwdriver. It should be located on the inside of the back plate, which is usually concealed by an attractive cover for the screw for aesthetic reasons. Be careful not to lose any internal components within the handle, for example the plates or levers that are on either side of the spindle. Keep them in the same order to make it easier to replace if necessary.

Then, with a second screwdriver take the screw off that holds the handle to the spindle at the back. Once the screw is free, you can pull the handle out and remove the broken spindle. Replace it with a new spindle, making sure it's the same length (you can buy them on the internet or at hardware stores). Securely screw it in the correct position. Do not overtighten the screw as this can damage the handle and the window frame.

Close the handle and try it. It is likely that it will operate smoothly and you'll be able open your window again.

Don't forget to double-check that your uPVC window is closing properly when you're working with the handle. If they're not closing properly, you may experience draughts or damp in your home. You could also compromise the energy efficiency of your home. A local window company, like Core Sash Windows, will be able to adjust the hinges on your window frames so they are able to shut properly.

Broken Spindle

It is quite common that the spindle inside the handle is broken, not the handle itself. This is particularly typical in upvc window repairs tilt and turn windows. These windows require a handle to operate a locking device in the window frame. The handle is attached to a central rod which in turn activates mushroom-like locking cams, these secure the frame of the window. If the dead latch mechanism does not open when the handle has been turned, it is likely the spindle has been damaged. This could be a frustrating problem.

Luckily there are options to fix this problem. A professional locksmith will be able to quickly and effectively fix this problem. A professional locksmith will be able disassemble the window's handle using a tool that removes the wheel portion in which the spindle is. This can be done without damage to the handle or the window frame.

Once the wheel has been removed the technician can then examine the spindle to determine what caused it to break. This involves disassembling the spindle, and then examining each component, noting any wear or damage. This process is usually performed by technicians in a clean and safe environment.

Next, clean the damaged spindle. This will help get rid of any dirt or other debris that may be obstructing it from functioning normally. The spindle can be repaired or replaced. If it is replaced, the technician can take the dowel that is similar in size to the one used in the first and drill mating holes in both pieces of the spindle. This will ensure that the new spindle has a precise fit with the handle.

If the spindle that is damaged is beyond repair, it may be required to replace it completely. Home centers sell generic replacements. However, if the style of your window is unique then it is necessary to find a woodworker or cabinet maker who can duplicate the exact part for you. Once the new spindle is in place it can be fitted to the handle by line up the screw holes in the handle with the frame's existing screws. Once the new handle is firmly installed, you are now ready to operate your uPVC window.