Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are easy to maintain and durable, as well as long-lasting. As opposed to aluminium and timber they do not corrosion or rot.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will help avoid unnecessary repair costs and improve energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it could cause a large amount of damage to your home, which can make it extremely dangerous and possibly fatal. It is crucial to take the time to make sure that you're doing everything you can to ensure that your windows are in good repair.

For single pane windows it can be relatively simple to replace windows, and the new one is usually able to fit into the old frame very easily. However, if windows with double panes are secured by internal beading, it'll be more difficult to get rid of the existing panes and install new ones. In this situation, it is necessary to buy plastic spacers to make sure that the new pane fits into the window frame.

Wearing eye protection and heavy gloves is a must when you are planning to remove the glass by yourself. It is also recommended to lay down a dropcloth before you begin working on the window panes so that any shards fall onto the fabric and not onto the floor, where they could be trampled.

It's a great idea to cover the gap with tape after the glass has been removed. This will keep drafts and water from getting into your home until a professional comes out to repair the window. It also acts as an obstruction to prevent intruders from getting into your home. If the gap is particularly large, you may think about a security door that has an integrated window, since this will offer the best of both worlds.

2. Sagging

Upvc windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber windows made of sash. Over time, they can develop a number of problems that include sagging. A sagging Upvc Repairs Near Me window could cause issues with light, draughts, and even security. If you notice that your uPVC window is beginning to lose its shape, it's crucial to act fast to prevent the problem from getting worse.

Repositioning the hinges could aid in fixing a window that is sliding. First, Upvc Repairs near me you'll need to open the windows so you can get at the frame. You can then unscrew both the top and bottom hinges using a screwdriver, and then adjust them counter-clockwise or clockwise. Close your window to test the fit after you have repositioned your hinges. If you're satisfied with the fit, you can tighten the screws to ensure that they remain in position.

If you cannot reposition the hinges, you may have to replace the seal. Rubber seals may dry out and lose their elasticity with time, which causes them to loosen. It is important to replace your seal as quickly as you can to keep your uPVC window watertight and draughtproof.

uPVC handles can also loosen up. This is often caused by screws that have been removed over time, but it could be caused by the handle mechanism wears out. Luckily, it's not difficult to repair a loose uPVC window handle yourself. First, you'll need close the window and perform a test to ensure that it fits. The joint at the corner of the sash must align with the joint on the casing. If it doesn't, you can use the screwdriver to loosen up the handle. Then, turn the mechanism into position.

3. Water Leaks

If you're waking up to wet floors and mouldy walls each time it rains it's important to take action. The leaks of water through windows could cause structural damage to your home, and hinder your ability to control the temperature of your home. The most frequent reason for leaking uPVC windows is that the sealant surrounding the frame is either damaged or is missing.

This is a simple fix that can be accomplished by any DIYer who is competent. Depending on the severity of the issue the old caulking might need to be removed before a new layer can be applied. It is crucial to remember that when it is about uPVC window repairs, do not be tempted to apply too much caulk and then make the area more difficult to clean and could reduce your energy efficiency.

Check that any drainage holes are free of debris in them, and also ensure that the sill pan has been angled correctly to drain away from the window. In more serious instances, you may need to replace the window.

Other signs of long-term water leakage are rotted sills and the appearance of black spots of mold on the walls near the window. This is a fungus that thrives in damp conditions and can quickly spread across the house.

It is also important to keep in mind that if the leak originates from the glass of your double glazed windows, it's more likely to be a problem with the glass seal, rather than the frame or sliding. It is also possible to be repaired by a uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or slack and open with a breeze It could be the hinges that are at fault. They can be repaired by any DIYer who is skilled and can be completed in a matter of minutes.

Like any mechanical part, hinges can be damaged over time. It is very easy to change a window hinge but it's much simpler if you have someone to help you hold the frame.

It is also important to verify that the uPVC hinges are opening and closed in the right direction. Look for the arrows that are on each hinge to determine which direction the window should be opened.

The problem can be caused by opening the window incorrectly or due to a poor installation in the factory. This can often be resolved by sending us a photograph on our website. We will be more than happy to give you advice.

Regular lubrication of the hinges is essential. Applying an engineering lubricant that is light to the hinges is a great method of doing this. We suggest using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also reduce the chance of windows sticking and prevent corrosion. This must be done at a minimum once a year. WD40 and other solvent-based lubricants should not be used since they could damage your uPVC windows.

5. Draughts

Draughts can be caused by different things. First, the hinges due to wear and tear can become misaligned, this can cause gaps to develop where the sash joins the frame. These can be easily repaired by giving them a thorough clean, however if they are beyond repair it might be necessary to have them realigned or replaced. Secondly the interlock, this is located on the hinge side of the window, can also become misaligned, again it is possible to just give them a clean but in some cases it might be necessary to have them replaced.

These seals are susceptible to wear and tear or get damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity lenses. This will help to regulate indoor temperatures, and reduce the possibility of draughts.

One of the most effective methods to reduce the draughts in your home is to use an draught excluder. These are typically made of fabric that are filled with some sort of filler and can be put on the windowsill on top. They can keep your home warm by blocking out cold air.

With a little regular maintenance and repairs, your upvc repair windows will continue to provide excellent insulation and security for your home. It is important to remember that all windows will eventually become worn out, and it is more cost-effective to replace them than to repair them. So, if you are experiencing problems with your upvc windows, it's recommended to seek help from a professional immediately.