Double Glazing Window Repair

Over time double glazing may cause problems, like being difficult to open windows or doors that snags. Fortunately these problems can be solved with ease.

Many homeowners will try to fix these issues themselves. However it should be left up to experts. It's risky to fix these problems without the proper tools and understanding.

Broken Panes

A broken window pane is a frustrating and annoying problem. It could let hot or cold air into your home and leave a gap which lets in dirt or moisture. This can affect your energy efficiency as your AC or furnace will have to work harder to keep your home warm. Depending on the season and whether you have single or double-pane windows, you may be able to repair the damage by using silicone sealant. For a permanent fix, you will need professional help.

A cracked window can be repaired with strong-duty tape. A piece of tape can be placed over the crack to prevent it from getting any worse. A crack that is large enough to penetrate the glass or is too large to be covered by tape will require to be completely replaced.

Broken glass can result from numerous factors: a stray pebble from the lawnmowers that strikes the window an unintentionally placed drink heavily on a glass-topped table; or a pet's excited jump when you open the front door. The frames of your window could change over time and crack the packaging material that holds the glass sheets.

If you've broken a glass pane, wear thick work gloves and put a cardboard box near to collect the fragments. Take the sash off and work on a level surface, such as a table. Wear a mask so as not to breathe in the glass shards.

Once the old glass has been removed, clean any paint or varnish from the frame of the window. You can use a heat gun to soften the old glazing putty or metal glazing points which kept the glass in place.

Then, you can measure the opening of the new glass. To allow for expansion and contraction you should always purchase the replacement glass slightly smaller than the opening. Visit your local hardware store or home center cut the glass to these dimensions.

Once you have your new glass, press it into the frame. Fill any gaps with silicone caulk. You can purchase it at a home improvement shop. Then, smooth the caulk with a putty knife. Add glaziers' points to the corners and frames of the glass every six inches so that the pane is held securely in place.

Condensation

Condensation can happen on double-glazed windows, no matter if they are old or brand new. This is especially true in winter when colder air is able to meet warm glass. While it could cause problems, it's not usually a major issue. Condensation on windows is an indication that your double glazing system is working properly.

It could be a sign that your seal is failing and moisture is leaking through the gap. If you notice a milky look on your window, or if you notice that water beads appear across its surface, this issue needs to be addressed to prevent mould, mildew, or any further damage.

Thankfully, condensation can be removed very easily. A technician will drill small holes in the frame of the window to let the moisture trapped escape. This process is known as defogging, and it can also be used to eliminate the stains caused by the trapped moisture.

Defogging does not fix the root cause of a failing window seal. It may not even work when the condensation has gone away as the air that is leaking between the panes may still be there. This could mean that you will still not get as much insulation from your windows as you should.

If you've noticed that moisture is growing in your windows It's recommended to speak with an expert as soon as you can to figure out what the next steps should be. They might suggest solutions such as adding vents in the windows that allow fresh air to circulate but don't allow warm air to escape.

The final thing you want is for your double glazing to fail, especially when it's costly to replace. Fortunately, with the right knowledge, skills and equipment, it's possible to repair your double-glazed and keep it in great condition for the long term. If you need a double glazing repair, contact us today to find out how we can help. We provide a range of services ranging from replacing one or several panes of glass that has been tempered to installing energy efficient upgrades.

Leaks

A leak is a big issue because it means you could have damp ingress which can lead to damage. It's expensive to fix, and it's usually a sign that your property is suffering from other issues like dry rot or mould. It is essential to repair a leak as quickly as you can.

If you feel an air draught emanating from your double glazed windows, it's likely that the seal inside the sealed unit has been damaged. It could also mean there is no longer any argon gas between the panes of glass which is used to create insulation. This can be fixed by a specialist technician who will repair the window.

Double-glazed windows may become cloudy or misty due to dirt. This usually means that the seal is deteriorating and the glass must be cleaned. This can be done by a specialist using high-pressure water jets which will quickly remove any dirt or debris.

If condensation is forming between the two panes of glass in your double glazing, this is an indication that the seal has sprung a leak and that there is no longer any argon in the panes of glass. This is a serious issue and suggests that your double glazing is not protect your home as effectively as it ought to. The glass unit is able to be replaced, but you will have to do it sooner rather than later, as the performance of the double glazed window has been affected.

If you have new double glazed windows that are under warranty, you must contact the company who installed them and report any issues with the units or the sealing of the glass, as it is unlikely to be covered by the warranty. If you attempt to play with the units or attempt to repair them yourself, it will void the warranty, and you should always leave these repairs to the experts. We recommend hiring a double glazing repair specialist.

Weather Damage

Double-glazed windows require a sturdy frame to keep the glass panes together and ensure they stay in place, especially in areas of extreme weather. Ice, snow high winds, and tumultuous storms can all cause damage to your windows. If you see cracks, holes or dents in your windows, contact a professional for a double glazing repair.

If you see water running out of the bottom of your window, this could be a sign that there is a breach in the seal within the window. This allows moisture to infiltrate your home. Additionally to that, your upvc repairs or aluminum window frame may be bending or warping. To fix this issue, you will have to replace the window seal and double glazing re-insert it into the frame.

Window seals help to ensure that your double glazed windows are airtight and keep heat from getting out of your home, as well as preventing condensation between the glass panes. Window seals are typically made of uPVC, aluminum or timber and hold the glass in the right place. When the window seals are damaged, you may encounter issues such as draughts, energy loss and windows that are misty.

The inability of the insulating gases in double-glazed windows is the common reason for windows to mist. The argon gasses keep the glass in place and create an airtight sealing however if the glass is damaged or worn out, the gases could escape. The argon gas may cause condensation between glass panes when it escapes.

The issue can be solved by replacing the window seal, inserting the glass and applying an anti-fogging agent to prevent condensation from occurring in the future. The best way to do this is to contact an expert to do the job for you.

Double-glazed windows are important however they can also be damaged and require to be repaired. Fortunately, most windows can be restored without the need for replacement. It is recommended to have some basic tools available. You'll need protective gloves as well as a tape measure scotch tape or transparent film, nail polish, and a sheet of plastic that is cut to size.