Ghost Immobiliser Installation

Protect your pride & joy from car thieves by putting in an immobiliser ghost. Our TASSA-verified system protects against hacking, key cloning, and vehicle immobiliser bypass.

The system is hidden inside your vehicles wiring loom making it totally invisible to anyone looking. It works by creating pin code push sequences that are activated by buttons already present on the steering wheel, door cards and the centre console.

No circuit cuts

It's not surprising that car owners are concerned about protecting the car they've worked so hard to buy. However, traditional security devices like alarms and wheel locks could easily be snatched away or taken over by thieves. Ghost immobilisers on the other hand is a very effective solution that operates in a quiet manner and is not easily recognized by modern day thieves.

A ghost immobiliser is a hidden device that connects to the CAN data network in your vehicle to disable the engine without the use of radio frequencies or key fobs. It communicates with the vehicle's ECU by using buttons on the steering wheel, dash and door panels to create an individual pin code that you only are aware of. The code can be altered at any time, and can contain up to 20 digits depending on your preference. It also comes with an emergency code that you can use in the event of forgetting your PIN.

The ghost immobiliser can also be helpful to prevent the relay box at your home from transmitting the signal from your car key, which will open the doors and start your vehicle. It can even block new advanced methods of stealing your vehicle, such as OBD port hacking. The device is small and weatherproof, so it's hard to spot and is also difficult to alter with.

Another advantage of the ghost immobiliser is that it can be fitted inside your car without permanent marks. It's ideal for those who plan to sell their vehicle in the near future. It's also quicker and simpler to install than the factory-installed system.

The Autowatch Ghost, a cutting-edge new generation device, stops thefts of cars using contactless technology by connecting to the CAN network of a vehicle and using the existing buttons to generate a unique PIN code. It is a devious system that can be installed without severing any wires, and does not require additional key fobs. It can also be connected to the vehicle's original ECU, preventing thieves from gaining access by using a new key or replacing the ECU with an "relay". This system is TASSA verified and can be linked to an International Security Register, allowing owners to have confidence that their vehicles are safe from theft.

No scanning with RF

You'll want to safeguard your vehicle from theft when you have spent an enormous amount of money and spent a lot of time customizing it. Installing an immobiliser is among the most effective ways to avoid theft. It will stop your vehicle from starting until you input an individual code. Using the buttons on your steering wheel as well as the dashboard, you can generate an apex of 20 digits long that is only known to you, ensuring that only you have access to your vehicle. It is also possible to set up a service and valet mode, which allows you to start your car temporarily without entering the PIN. This allows your technician to work on your vehicle without your presence. This feature is ideal for people who want to save time and make their lives easier.

Ghost immobilisers, which are new generation device connects to the CAN data network of your vehicle and uses buttons on the dashboard and the steering wheel to create a PIN code. It is designed to blend in with the rest of your vehicle, since it doesn't emit any noise or light indicator. It can be installed anywhere on your vehicle, without altering the look of the vehicle.

This stealthy system is TASSA approved and can cut down on the cost of insurance. It has a tracking function that will locate your vehicle, even if it's stolen. This is great when you own a unique expensive car which you've invested many hours customizing.

The autowatch ghost installation walsall Ghost can be used together with an iPhone app to enable you to start your vehicle remotely if you forget your PIN or are not able to enter the vehicle for some reason. This feature is ideal for those who need to take your kids to school or run errands but don't want to put yourself at risk by letting having someone else drive your vehicle. It's also useful in the event that you need to bring your vehicle to a mechanic for maintenance or repair.

Another benefit of the Ghost is that it does not transmit or detect radio frequency signals, which makes it undetectable to thieves who employ RF scanning or code grabbing technology. It can also protect your vehicle from key cloning, ECU swapping and other common methods of car theft.

No key cloning

ghost 2 immobiliser installation near me immobilisers are a fantastic option for protecting high-end vehicles. They are designed to block key replication. They prevent your vehicle from being started until a PIN code has been entered with the standard key fob. This makes it more difficult for thieves to steal your vehicle, and could discourage them from trying. This is an especially good idea if you have invested lots of time and money making your vehicle unique or have a unique or expensive model.

These immobilisers are connected to the vehicle's CAN data network and are completely hidden which means that their presence is not obvious. The device is also difficult to identify using radio frequency scanning technology or code grabbing. This means that a burglar must spend a lot more time to steal your car.

To bypass the system, a thief must be aware of the pin code and the location of the ghost installers near me. The pin code is exclusive to you and you can change it as many times as you need to. The pin you select is easy to remember but mathematically impossible for anyone else to decipher. Additionally the engineer will have provided you with an emergency pin code override in case you forget the pin.

The Ghost CAN bus immobiliser is weatherproof, and can be installed in any part of your vehicle. It can be used with any vehicle and can be fully customized to match your vehicle's look. It is also very affordable and easy to use. You can even transfer the device to a different vehicle if you decide to change cars during the lifetime of ownership, provided that the new vehicle is compatible with it.

The CAN bus is compatible with other security features. It could, for instance, detect damage to the vehicle and alert the owner. It also can stop the engine if the car is tampered with. The system can protect your vehicle from hacking as well as key duplicate. It can also detect any vibrations or contact with the vehicle. Additionally, it will notify the owner that the vehicle has been moved.

No OBD port hacking

Ghost is an immobiliser that is hidden and connected to the CAN data network of your vehicle which stops thieves from gaining access to your vehicle to disable the alarm, deactivate the key fob and generate new keys. This technology is an improvement over the old methods used by thieves to steal vehicles in the past. The CAN data network also means that your system will not be affected by disconnecting or change your battery.

The Autowatch Ghost is the world's first aftermarket CAN bus that is a non-detectable immobiliser that safeguards against key-cloning, hacking and replica car theft. It does not use LED indicators or key fobs, instead leveraging the buttons on your steering wheel or centre console, ghostinstallations (Click At this website) as well as the door panels to allow you to create a unique PIN sequence (up to 20 button presses) that needs to be entered prior to when you can drive your car away.

Modern thieves are able to utilize diagnostics to identify circuit breaks on your vehicle. They can bypass immobilisers which require a lot wiring or are integrated into the wiring. The Ghost is weatherproof and does not require any additional wiring. It cannot be identified by diagnostic tools that are professional. It can be installed even on vehicles equipped with anti-theft devices.

A Ghost immobiliser also has a significant benefit: your car can only be started by someone who knows your PIN and physically has access to your vehicle. This is a major advantage over traditional security systems which can be tampered with using simple cable alteration, a screwdriver or the utilisation of an universal remote controller.

You can easily reset your PIN in case you forget it using the emergency PIN override feature of your mobile or computer. This is useful if are looking to start your vehicle after leaving it in a garage or by using a valet parking service.

The Autowatch ferrari ghost installer 2 has been approved for insurance by TASSA and can be installed by our authorised installers. It features a QR fingerprint system for parts to be identified, which allows the return of stolen components in the event of their being discovered, and can also be switched into 'service mode' that will allow the engine to start when your car is in a garage or with valet parking however, you have to enter your PIN code in order to get out of the car.