Window Repairs

Window repairs can save homeowners money and keep their homes warm. In the event of major damages such as broken glass or a cracked frame, a window replacement could be necessary.

Many other issues can be solved to prolong the life of windows. Common problems include:

Broken or cracked panes

It's a rock that's been that was tossed by your lawnmowers or a tree branch that has been blown by strong winds, window repairs cracked windows are not just ugly, but it can also result in higher electric bills since the broken pieces allow cold air to enter your home. Luckily, it's usually relatively easy to fix windows with cracked panes.

Begin by carefully removing the glass using gloves and sunglasses. You may need use a utility knife to remove old glazing compound or putty around the frame's edges. Then, use a soft paper towel or cloth to clean the glass's surface and wood of the frame.

Once the area is clean then apply a waterproof silicone caulking on the frame's perimeter. This will prevent water from entering the frame through the cracks and cause further damage.

A bad crack in double-paned glass could affect the gas between the panes, making your windows less efficient in insulating. If the crack is severe enough that it is threatening the structural integrity of the window, or if the pane inside is not there, you may need to consult an expert.

Cracks caused by thermal stress can occur when there's an extreme temperature difference both inside and outside your home. The glass is then able to expand and contract. If the cracks are on two sides of a window, it is recommended to replace it rather than try to repair it.

Clear tape can be used to seal cracks in windows that aren't yet ready to be replaced. It can also keep out bugs and Window Repairs cold wind. You can cut a piece of nylon stocking or tarp that's large enough to cover the crack and glue it in place with duct tape. This isn't a permanent solution however it's a great solution in a pinch and keeps insects and cold air out of your home. If your windows are older and you're starting to notice cracks in the glass It's an excellent idea to talk with the local window company regarding whether replacing the entire window would be a better option for you.

Rotten Wood

Wood rot is among the most frequent issues with windows. It can ruin the appearance of a home and also pose a safety risk. However, it is possible to repair wood that has rot. It is first necessary to identify the cause of the wood decay. Check for roof leaks and other places where water can enter the wood.

The next step is to remove the rotten parts of the window frame. This can be done using the use of a chisel, rasp or claw hammer. After you have removed the decayed wood, you'll have to replace it with fresh wood. Pre-treated wood is suggested for this task, since it will resist rot. If you are unable to replace the timber that has rotted, you can use filler and wood hardener to strengthen the damaged area. Most hardware stores will carry this type of product. Follow the directions on the label of the product to ensure the most effective results.

After you have repaired the damaged areas of the window sill, it is important that you protect the area. You can do this by applying a water-resistant wood sealant. Sikkens for instance is a great one to use.

Make use of a two-part epoxy to protect the wood against further damage. It is easy to apply and leaves a nice finish. It is important to follow the directions on the label. Once the epoxy filler has dried, you can smooth the surface of the wood. It is best to begin with a rough piece of sandpaper, and then progress to a smoother one.

You do not want to expose the damaged part to further moisture. Therefore, it is an ideal idea to cover the repaired area with an oil-based primer which will protect it from moisture. After that, you can apply the waterproof wood sealant.

The website won't work

A window that isn't opening can be caused by various reasons. Wood frames can warp during wet weather, the house might have sunk or someone may have nailed it shut for security reasons. With a little patience and the right tools you can open the majority of stuck windows.

One of the most frequent reasons for windows that won't open is accumulated gunk or debris on its moving parts. Dirt and grime build up on the sliding tracks, hinges, and locks over time, says Acme Glass. Additionally, hardware made of metal can rust when it comes into contact with humidity and direct sunlight. Keeping these areas lubricated with spray grease can prevent the oxidation process and ensure that your window is functioning well.

Stuck windows can be caused by an unintentional break or loosening of the pulleys that are used to raise and lower the window. The components may lose tension and become obstructed if they are located two or more floors above surface.

If you have trouble opening a door, you can use a pry-bar to gently open the door. Put a block in the frame of the window to give the pry bar more leverage. Be careful not to scratch the wood or the window repair. Try running a hairdryer along the frame's edges for a few minutes. This will warm the wood and make it easier to move.

Another common issue with windows that don't open is a broken spring that prevents the window jamb from lowering or rising. Depending on the manufacturer of your windows, you will need to refer to your owner's manual for further instructions.

If you have tried cleaning the moving parts of your windows and lubricating them but they're still unable to open it could be the right time to replace windows with energy-efficient, new windows from Homespire Windows and Doors. Don't let your windows slide from functional to inoperable because windows that aren't properly shut can expose your home to burglary and water damage. Contact us for more information about our windows replacement services and products today!