How to Replace a Kia Sportage replacement kia key fob Key

For many Kia models keys, there is an integrated keyless entry system. This key is similar to the remote control, and can be exchanged with a Kia dealer.

Key fobs might stop working due to a variety of reasons, such as an inactive battery, worn out buttons signal interference, or water damage. Here are some guidelines on how you can get your Kia Sportage replacement key working again.

How do you replace a smartkey or remote key?

The battery inside your Kia's smart key will eventually have to be replaced, whether it's a remote or a push-to-start one, or a regular key that does not contain a transponder. This is especially when the car displays a message telling that the smart or remote key is not powered by the battery.

Luckily, this is an easy process. In order to replace the battery on the key fob take the mechanical key from the slit at the back of the key fob and lift the cover. A small screw will be found inside the key fob that holds the battery in the correct position. Take out the old battery by unwinding the screw using a small screwdriver. Then, insert the new and close the slit on the key fob.

Test the key fob by pressing the lock or unlock buttons. It's good when the doors lock or unlock as expected. You can now utilize the hands-free feature to lock and unlock your Kia whenever your fingers become chilly or when you need to do some errands in Brandon.

Note: Certain key fobs may need to be programmed (transponder chips or smart keys). This requires a machine for programming, which is only available to the automotive locksmith or dealer. Other keys (non transponder metal keys) are not required for programming. If you're looking to reprogramme your key, you'll need note the key code number on the tag for the key code.

How to replace a battery

If the Kia key fob doesn't respond to pressing the lock or unlock button, it is most likely that the battery is not fully charged. A low battery could cause other problems like the check engine light coming on or a delay in cranking the engine. Fortunately replacing the key fob battery is a relatively simple DIY project that requires only the most basic tools.

Before beginning the process be sure that your vehicle is turned off and all doors are closed. Find the small, metal or plastic piece at the bottom of the key fob. Press it until the key falls out. You can then insert the key in the handle of the door for the driver to unlock your car.

To replace the battery in the key fob, take off the cover at the rear. Use a plastic pry tool to open the latch that holds the black negative cable. Remove the old battery and orient the new battery in a way that the "+" positive side faces you, while the "negative" negative side is facing towards the fob's electronic contacts. Avoid using too much force when pushing the new CR2032 into position to avoid breaking or bending the steel contacts.

Once the new battery has been installed and the key fob is turned on, turn it off and then on in the ignition repeatedly until the door locks. Then, test your Kia key fob and see if it is working properly again.

How do you replace the smart key?

Depending on the model of the Kia Sportage, you may have the standard key fob, or a smart key. The smart key is equipped with an embedded mechanical key blade however, the standard key fob does not. Both key fobs have an internal battery that will eventually need to be changed. It's a fairly simple process that only takes about two minutes.

Before you begin, you will want to make sure that you are on a level surface with enough lighting and that your Kia is not on. Remember that the fob is made up of small pieces that could be thrown off in the event of a mishap.

The first step is to locate the small release button on the lower backside of the fob. It's either a circular button or a rectangular slot. When you press it mechanical key blade, it will appear and you will be able to open the key fob.

Once the key fob is removed, you can remove the battery that was in it. The new battery should be a CR-2032 and can be bought online or from your local auto parts store. When you are done with the battery, you should be able to lock and unlock your car using your key fob - even if your engine isn't running!

How do you replace the mechanical key

The Kia keyfob is a wonderful convenience that allows us to lock or unlock our car with just pressing the button. But, as with all devices, it can have problems from time to time. There are solutions to resolve these issues and keep your key fobs functioning for an extended period of time.

A dead or weak battery is among the most frequent problems. This can cause your device to stop working or work intermittently. If this is the issue then replace the battery with a new one.

If this doesn't solve the issue, you can use an ordinary screwdriver with a flat head to push the fob's plastic casing open. Be careful not to scratch any internal components or scratch the plastic. When the battery is open, carefully take off the battery you have been using and replace it with a new one.

After the new battery has been put in, close and then open the doors using the mechanical key (every key fob in the Kia lost Key replacement has an emergency mechanical key that can fit in the slot). Test the key fob and check that it's functioning correctly. If the fob not working, contact an expert locksmith or dealer to help resolve the issue. To avoid future lockouts, make sure you get an emergency key that will work in all of the door and trunk cylinders.