Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are durable, long-lasting and easy to maintain. In contrast to aluminium and timber, they do not corrosion or rot.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will reduce costly repairs and improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows could cause severe damage to your home, and could even be fatal. It is crucial to take the time to ensure that you're doing all you can to ensure that your windows are in good shape.

For single pane windows it can be relatively simple to replace windows, and the new one will generally fit within the frame of the previous one easily. If you have double-paned windows which are held together by internal beading, it is more difficult to remove and replace the panes that were previously in use. In this instance you'll need find some plastic spacers that help the new pane to fit properly into the frame of the window.

Wearing protective eyewear and thick gloves is a must if you plan to remove the glass by yourself. It is also an excellent idea to lay down a dropcloth before you begin working on the glass so that any shards fall on the fabric instead of onto the floor where they can be trampled on and cause further damage.

Once the glass has been removed, it's a good idea to cover the gap with packaging tape or duct tape to stop water and drafts from getting into the property until a professional can come out and fix the window. This will also act as a barrier, deterring any intruders to gain access to your home. If the distance between the door and the window is substantial, you may need to consider security screens that has windows. This will give you the best of both.

2. Sagging

uPVC windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber windows with sash. Over time, they can be affected by a variety of issues, including sliding. A sagging uPVC windows can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to shrink, it's important to act quickly to prevent the problem from worsening.

Repositioning the hinges could aid in fixing a window which is sagging. To do this, you'll need to open the window to access the frame. With an screwdriver, remove the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. After you've repositioned the hinges, close the window doctor near me and check for fitting. If you're satisfied with the fit, you can tighten the screws to ensure that they stay in the right place.

If you aren't able to move the hinges, you might need to replace the seal. Rubber seals may dry out and lose their elasticity with time, leading them to lose their tightness. If this happens, it's crucial to replace the seal as soon as possible so that your uPVC windows are waterproof and secure from draughts.

UPVC handles can also loosen up. This is usually due to screws that have been removed over time, but it could be caused by the handle mechanism getting worn out. It's relatively easy to fix a loose uPVC handle. First, you'll need to shut the window and do an initial fitting. The joint at the corner of the sash should align with the joint on the casing. If it doesn't, you can use a screwdriver or a wrench to loosen the handle and reverse the mechanism back into its original position.

3. Water Leaks

It is important to take action if awake each day to find a smoky wall and floors that are wet. The leaks of water from windows do can not only cause degrading of the structure of your home but also hinder your efforts to regulate the temperature inside your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is a relatively easy fix that can be completed by any competent DIYer. Depending on how serious the issue is, old caulking might need to be removed. When it is time to uPVC repair, it is important to avoid over-caulking. This will only make your window harder to clean and lower its energy efficiency.

Check that any drainage holes have no debris in them and that the sill pan has been properly angled to allow the water to drain from the window. In more severe cases, you may need to replace the window.

Other indicators of water leakage are rotted sills and the appearance of black spots of mold on the wall near the window. This fungus thrives in damp conditions and can spread quickly throughout the home.

If the leakage is occurring between the double-glazed glass it is more likely the issue is more with the seal than the frame. Again this can easily be corrected by an uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason for the reason that your uPVC window is difficult to open, or if it opens in a breeze. Anyone with the skills to fix them can replace these in a matter of minutes.

Most households in the UK will have top-hung or Window Doctor side-hung uPVC windows that are hinged and, just like any mechanical component they will wear out over time. It's very simple to change the hinges on a window however it is simpler if you have someone to help you hold the frame.

It is also important to verify that the uPVC hinges are being opened and closed in the correct direction. Check for the arrows on each hinge to determine which way the window should be opened.

The issue could be caused either due to opening the window in the wrong way or by a poor installation at the factory. Sending us a photo via our website will often resolve the problem. We are more than happy to give suggestions.

It is also important to grease the hinges on a regular basis. Applying a light engineering lubricant to the hinges is an ideal method to accomplish this. We suggest using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It also decreases the chance of windows sticking and help prevent corrosion. This must be done at a minimum once a year. WD40 and other solvent-based fluids are not recommended since they can damage the parts of your uPVC window doctor (Read More Here).

5. Draughts

Draughts in Upvc windows can be caused by a few different things. Firstly the hinges, again because of wear and tear, could become misaligned. This causes a gap to form between the sash and the frame. This can be easily repaired by giving them a good clean, but when they're beyond repair, it could be necessary to have them aligned or replaced. Secondly the interlock, this is located on the hinge side of the window, can be misaligned. Again, Window doctor it is feasible to give them a good clean, but in some cases it might be necessary to get them replaced.

These seals can wear down or get damaged over time, allowing air to escape. Replacing these with high-quality weatherstripping can help stop draughts. Another alternative is to replace the upvc window with glass that is low-emissivity, this will help to regulate indoor temperatures, and also reduce draughts.

Another, and most effective ways to cut down on drafts is to use a draught excluder, these are typically fabric tubes which are filled with a kind of filler. They can be placed on the windowsill on top. They will keep your home warm by blocking out cold air.

With a little maintenance and repairs windows made of upvc will continue to provide a great level of insulation and security for your home. However, it is important to recognize that windows last for a certain period of time and eventually, they will reach the point when it's more economical to replace them than repair them. If you are experiencing issues with your upvc window, it's best to consult a professional immediately.