UPVC Window Handle Replacement

Replacing a broken window handle is a simple process and with the right tools it can be done quite quickly. It is essential to know what kind of handle you have as well as the size of its spindle before you purchase an alternative.

Older uPVC window handles have a spur that protrudes and locks on the cockspur wedge striker. They can be left or right-handed and must be to match when replacing.

What kind of lock and handle do I have?

There are many window locks and handles made from upvc each with their own advantages and purposes. The type of handle you have will determine how easy it is to open your windows and if the locking mechanism works as intended. Over time, and with regular use the handles made of upvc on your windows can get worn out and damaged. This makes them less secure and less effective. In some instances, they could even fall off completely. If you notice that your upvc window handles have fallen off, it's essential to repair them as quickly as you can. This will stop possible burglaries, and keep your house safe.

Luckily, replacing your upvc window handles is a fairly simple job that can be done by nearly anyone. With a few basic tools and the right information, this is a simple procedure that should take no less than a few minutes. You will need to know the type of handle or lock that you have on your window. This will allow you to choose the correct replacement glass for window.

Inline Espagnolette Handles

They are the most popular type of upvc handle and are usually located on the side of your window. They are flat in design and come with a latch that connects to the locking mechanism on the window frame when it is turned. Inline upvc handles have a spindle that goes through the middle of the handle, and into the frame of the window to activate the latch.

Cockspur Handles

These handles are usually found on older uPVC window frames and feature an unusual hook-shaped design. Cockspur handles are attached to the window frame by one screw, and are less secure than other types of window handle.

Handles that can tilt and turn

As opposed to the other handles made of upvc that are tilt and turn, these handles can be rotated to open the window and the handle can be tilted to the side for ventilation. Generally, they have a 7mm spindle at the side of the handle. They are available in left and right handed versions.

It is crucial to determine the size of the spindle when purchasing a replacement upvc handle. Not all are exactly the same size. To determine the length of your upvc handle, simply drop something in the middle of the hole and then measure how far it extends before meeting an obstruction. This is the maximum spindle size that will fit into your windows.

What is the spindle?

uPVC window handles function in a similar manner to doors. By turning the handle, you will be able to activate a latch inside the frame. The latch opens the window, so it can be closed and opened. These handles can be damaged, especially if they're often used or are subjected to harsh conditions. It is possible to replace the handles on your uPVC window if they are not operating correctly.

There are many different types of uPVC handles, including Espag, Cockspur, and Spaded handles. They are designed in a variety ways to fit into uPVC frames. Each handle type uses an individual spindle to lock the window mechanism. It is crucial to know the kind of handle that is installed on your uPVC windows so that you can replace it with a suitable one.

The base section of the handle will tell the type of uPVC it is. There should be a "snap-in' cover over one screw which holds the handle base in the correct position. Take it off and you should be able see the second holding screw located at the opposite end of the base of the handle. After both screws have been removed and you are able to pull the handle from the uPVC.

Once you have removed the uPVC window handle, you will need to remove the old spindle from the locking mechanism. Take careful note of the length of the spindle as you'll need to make sure that you buy a replacement glass for Window near Me that has the same length as your original handle and locking mechanism.

The spindle wears out and cannot operate the locking mechanism. This could be due to wear and tear from continuous use, a loosening of the locking mechanism or even rust over time. If this happens, you'll need to replace both the window handle and locking mechanism to restore the full functionality of your uPVC Windows.

How do I take off my old handle?

Over time and through everyday use, window handles can become damaged or broken and when this happens, it is crucial to repair them as quickly as possible to ensure the security of your home. It is good to know that replacing a worn or damaged handle is a fairly simple job that can be carried out in less than a minute and doesn't require any specialist tools.

The first step in removing the old handle is to remove the screw that is located at the top of the base of the handle. Once the screw is removed, the handle can be removed. There will be a second screw that is located at the bottom of the handle's base, and it is able to be removed too. Once these two screws are removed, the handle can be removed from the base of the window.

After removing the handle and fixing holes, align the holes of the new handle with the holes already present in the window frame. There may be a tiny sticker or caps on the new handle, so take them off the caps if needed, and then screw the handle in place. Once the handle is set, it is essential to check that it works by turning the handle and ensuring that the lock mechanism is activated.

Espag handles have an elongated spindle that extends from the handle and slots into a multipoint locking mechanism within the window frame. Cadenza windows have a blade with cutouts that fit into the lock mechanism. Cockspur handles are long and hang over the frame of the window or the transom crossmember of the bar.

Once you have the new handle in place, insert the spindle inside the lock inside the window and then tighten it. Once the handle is firmly fixated then replace the snap-in cover and the screw cap (if appropriate). The handle is now ready to use by opening and closing the window several times to ensure that it is working correctly and securely.

How do I install the new handle?

The process of changing your window handle made of uPVC isn't difficult, and the process is simple. All you require is a screwdriver and a little bit of patience. First, make sure that the old handle is unlocked. Remove any screws visible. You could also replace them with screw caps. After removing the handle and you are ready to take an note of the length of the spindle that protrudes from the back of the handle. This is crucial since it will determine the type of handle that you will need to purchase.

Espagnolette handles made of uPVC are the most sought-after type of handle. They have a spindle that is connected to the handle, and is responsible for a locking mechanism within the window frame. The handle opens the latch, allowing the window to open. Over time and through regular use, espagnolette handles may be damaged or damaged and it is necessary to find an alternative.

Cadenza handles are a form of uPVC handle that is commonly employed with tilt and turn windows. They feature an elongated blade that functions as the multipoint locking mechanism inside the window. They are usually more secure than espagnolette handles as they can only be opened from the inside. They can be replaced using the same procedure as espagnolette handles, however you will need to ensure that the new handle has a curved blade as opposed to flat ones.

Once you have determined the correct handle to purchase, you can simply align the new handle to the existing screw holes, and then screw it in place. You should then put the screw covers back on and make sure your new handle is operating correctly. This is done by moving the handle from the locked position to the unlocked and then back to the locked position several times. It is possible to contact an expert to determine whether you can solve any problems. They will often be able to guide you on the best way to solve the issue in a fast and effective manner.