UPVC Window Handle Replacement

It's simple to repair a broken window handle with the proper tools. It is important to identify the type of handle and the spindle's length prior to purchasing the replacement.

Older uPVC window handles have a spur which protrudes and locks over a wedge striker. They can be left or right-handed and must be to be replaced with the same handle.

What kind of lock and handle do I need?

There are many window locks and handles made from upvc each with their distinct advantages and functions. The type of handle you own will determine if the locking mechanism you have is effective and if it's easy to open the windows. Over time and through regular usage, the window handles made of upvc are prone to wear or damage. out, making them less secure and efficient. In some instances, they could even fall off completely. It is important to repair the handles on your window made of upvc when you see they are falling off. This will prevent possible break-ins, and keep your house secure.

It's a simple job that almost anyone can do. With a few basic tools and the right information it's a straightforward process that shouldn't take longer than a couple of minutes. To begin you'll need to identify the type of handle and lock you have on your window to help you identify the best replacement.

Inline Espagnolette Handles

They are typically located on the side of the window. They are flat and feature an open latch that is connected to the locking mechanism of the window frame. Inline upvc handles have spindles that run through the centre of the handle, and into the window frame to operate the latch.

Cockspur Handles

These handles are typically found on older uPVC windows and have a distinctive hook-shaped design. Cockspur handles have a single screw that secures the handle to the frame and aren't as secure as other types of window handles.

Tilt and Turn Handles

In contrast to other upvc window handle replacement handles that are tilt and turn, these handles can be rotated to open the windows and tilted inwards for ventilation. They have a 7mm spindle on the back and are available in right and left-handed versions.

When buying double glazing replacement windows upvc handles it is essential to measure the spindle's length because not all handles are identical in size. Drop something into the middle of the hole to check the length. This is the largest spindle size that will fit your windows.

What is the spindle?

uPVC window handles function similar to doors, by turning the handle to activate an internal latch within the frame. The latch opens the window, so it can be opened and closed. The handles can become damaged, especially if used frequently or exposed to harsh conditions. This can leave you needing to replace your uPVC handles on windows since they may not operate the window correctly anymore.

There are many different kinds of uPVC handles that are available, including Espag, Cockspur and Spaded handles. These handles are designed to fit in the uPVC frames in different ways. Each handle has a particular spindle that is used to lock the mechanism fitted into the window. This is why it is crucial to identify the kind of handle you have installed on your uPVC window so you can get the correct replacement.

You can check what type of uPVC handle you have by taking a look at the base of the handle. There should be a'snap in cover over one screw that holds the handle's base in the correct position. Remove this and then you should be able see the second screw on the opposite side of the base section of the handle. After both screws are removed then you should be able to pull the handle from the uPVC.

Once you have removed your uPVC window handle, you have to carefully unscrew the spindle that was previously attached to the locking mechanism. Be sure to note the length of the spindle as you'll need to make sure that you purchase an alternative that is the same length as your original handle and locking mechanism.

The spindle wears out and cannot operate the locking mechanism. This can be caused by corrosion, damage due to constant use or a loosening locking mechanism. If this occurs, it is necessary to replace the window handle and the locking mechanism to restore complete functionality to your uPVC windows.

How do I get rid of my old handle?

Through time and regular use, window handles may become damaged or broken and when this happens, it is important to repair them as soon as possible to ensure the security of your home. Fortunately, replacing a damaged or worn handle is a simple job that can be carried out in less than one minute and doesn't require any specialized tools.

To remove the handle, first remove the screw that is located at the bottom of the handle. Once the screw is removed, the handle will be pulled away from the base section. A second screw is located at the bottom of the handle. This can also be removed. Once the two screws are removed, the handle will be detached from the window's base.

After removing the old handle, align the fixing holes of the new handle with the holes that are already in the window frame. If there is a cap or sticker on the new handle remove it if required and put the handle back in the appropriate position. Once the handle is set, it is important to test whether it functions by turning the handle, and ensuring that the lock mechanism activates.

Espag handles have an elongated spindle that extends from the handle and slot into a multipoint locking mechanism in the window frame. Cadenza windows feature a blade with cutouts that are incorporated into the lock mechanism. Cockspur handles are long and are hung over the outer frame of the window or the transom crossmember of the bar.

Once you have the new handle in place, insert the spindle into the lock in the window and then tighten it. Replace the snap-in cover and screw cap (if applicable) after the handle is securely fixed. When the handle is ready for use, open and close the window a few times to make sure it is working properly and securely.

How do I install the new handle?

Changing your uPVC window handle isn't a big deal and the process is simple. You'll need a screwdriver and a little bit of patience. The first thing to do is to ensure that the handle is in the unlocked position and then remove any screws that are visible, you can also replace them by screw caps if you need. After you have removed the handle, you will need to note the length of the spindle which extends from the back. This is important as it will determine the type of handle that you will need to buy.

Espagnolette handles on uPVC are the most sought-after type of handle. The spindle is inserted into the handle to activate the locking mechanism within the window frame. The handle opens the latch and allows the window to open. During regular use and over time, handles for espagnolette may be damaged.

Cadenza handles are a second type of uPVC window handle, which is typically used on tilt and turn windows. They have a protruding knife that is operated by a multi-point locking mechanism within the window. They are usually more secure than handles made of espagnolette because they can only be opened from the inside. You can replace them with the same procedure as you would do for handles made of espagnolette, but make sure the new handle is not angled and flat.

Once you have decided on the right handle for you then you can line up the new handle with the existing screw holes and then screw it into place. Then, put the screw covers back on and verify that the new handle is working properly. This is done by shifting the handle from the locked to the unlocked position and then back to the locked position several times. It may be worth contacting an expert to determine how you can fix any issues. They can offer advice on how to resolve the issue in a quick and effective way.