UPVC Window Handle Replacement

It is easy to repair a broken window handle with the right tools. However, it is essential to identify the handle's type and spindle's length prior buying the replacement.

Older uPVC window handles have a spur that protrudes and locks on a cockspur wedge striker. These can be left- or right-handed and should be matched when replacing.

What type of lock or handle do I have?

There are a variety of windows locks and handles made of upvc, each with its particular advantages and uses. The type of handle you have will determine if your locking mechanism is efficient and if it's easy to open the windows. With time and regular use the upvc handles that are on your windows can become damaged and worn out. This makes them less secure and less effective. In some instances they might even fall off completely. If you find that your window handles have been removed, it's essential to repair them as quickly as possible. This will help prevent burglaries and ensure that your home is secure.

It is a good thing that replacing your upvc window handles is a relatively simple task that is achievable by almost everyone. With just a few tools and the right information it's a simple procedure that should take no more than a couple minutes. To begin you must identify the type of lock and handle you have on your upvc window to help you find the perfect replacement.

Inline Espagnolette Handles

They are usually found on the side of the window. They have a flat design and have a latch that connects to the locking mechanism of the window frame when turned. Inline upvc handles feature a spindle running through the middle of the handle and into the window frame to operate the latch.

Cockspur Handles

These handles are usually found on older uPVC window frames and have an unusual hook-shaped design. Cockspur handles are fitted with a single screw that secures the handle to the frame and aren't as secure as other kinds of window handles.

Tilt and Turn Handles

Unlike the other upvc handles, tilt and turn handles can be rotated to open the windows and the handle can be tilted to the side for ventilation. They feature a 7mm spindle in the back and are available both in right and left-handed versions.

It is essential to know the size of the spindle when purchasing a new upvc handles. Not all are exactly the same size. Drop something in the middle of the hole to test the length. This is the maximum spindle size that will fit your windows.

What is a spindle?

uPVC window handles operate similarly like doors, turning the handle to open an opening inside the frame. The window can then be opened and shut. These handles can be damaged, especially if frequently used or exposed to harsh environments. This can lead to the need to replace your uPVC handles for windows as they may not operate the window properly in the future.

There are many different types of uPVC handle options, such as Espag, Cockspur, and Spaded handles. They are designed in a variety ways to fit into uPVC frames. Each handle style uses an individual spindle to lock the window seal replacement mechanism. It is important to identify the kind of handle that is installed on your uPVC windows to ensure that you replace it with the right one.

You can check what type of uPVC handle you are using by inspecting the base of your handle. There should be a "snap in cover over one screw that holds the handle's base in the correct position. Once you remove this you will be able to see the screw that holds the base of the handle in position. Once both screws are removed you should be able to pull the handle away from the uPVC window.

After you have removed the uPVC window handle, you have to remove the spindle you have removed from the locking mechanism. Take note of the length of the spindle. You'll need buy a replacement window handle of the same length as the handle that was originally used and the locking device.

The spindle wears out and cannot operate the locking mechanism. This could be due to corrosion, damage caused by continuous use, or even a loosening locking mechanism. If this happens, you will have to replace both the window handle and the locking mechanism in order to restore the full functionality of your uPVC Windows.

How do I remove the old handle?

In the course of time and daily use, window handles can be damaged or destroyed, and when this happens, it is crucial to repair them as soon as you can to ensure the safety of your home. It is good to know that replacing a worn or damaged handle is a relatively simple task that can be completed in less than a minute and doesn't require any specialist tools.

The first step in removing the handle that was previously used is to remove the screw located on the top of the base of the handle. Once the screw has been removed, the handle will be removed. There will be another screw located at the bottom of the handle's base and this can be removed as well. Once both of these screws are removed the handle can be removed from the base section of the window.

After the handle has been removed, you can take the new handle and align the fixing holes with the holes currently in the window frame. There might be a small sticker or caps on the new handle, so remove them if needed and then put the handle in the frame. It is important to check whether the handle functions after it is installed. Turn the handle around and make sure that the lock mechanism is activated.

Espag handles come with a spindle which protrudes out of the handle and slot into the multipoint locking mechanism on the window frame. Cadenza windows feature a blade with cut-outs that slot into the lock mechanism, while Cockspur handles have a long nose that hooks over either the frame's outer or the transom bar cross member inside the window.

Once you have installed the new handle, insert the spindle into the window lock and tighten it. Once the handle is securely fixated then replace the snap-in cover and screw cap (if necessary). The handle is now ready to use to use, so try opening and closing the window a few times to check that it functions properly and securely.

How do I install the new handle?

It's not difficult to change the handle on your windows made of uPVC. The process is very easy. You only need an screwdriver and a bit of perseverance. The first step is ensure that the handle you have previously used is locked and then take out any screws that are visible. you can also replace these by screw caps if you need. After removing the handle you'll need to take note of the length of the spindle that extends from the back. This is crucial since it will determine the kind of handle you'll require to purchase.

Espagnolette handles that are made of uPVC are the most popular kind of handle. They have a spindle which is connected to the handle and operates a locking mechanism inside the window frame. When the handle is turned it releases the latch on the window, allowing it to open. With time and regular use, espagnolette handles may be damaged or destroyed and it is necessary to locate an alternative.

Cadenza handles are a type of uPVC handle that is commonly used with tilt and turn windows. They have a protruding knife that operates a multiple-point locking mechanism inside the window. They are more secure than espagnolette handle as they can only open from the inside. They can be replaced using the same procedure as espagnolette handles, however you will need to make sure that the new handle has a curved blade as opposed to flat ones.

After you have chosen the right handle, simply align the new handle with the existing screw holes prior to screwing it in place. Then, put the screws on and test your new handle. This is done by shifting the handle from the locked to the unlocked position and the reverse direction several times. It might be worthwhile to speak with an expert to see whether you can solve any issues. They will often be able to guide you on the best approach to solve the issue in a fast and effective way.