Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are easy to maintain and are durable and long-lasting. They are not susceptible to rot or rust like timber and aluminum.

It is essential to clean and oil UPVC windows and doors regularly. This will prevent unnecessary repair costs as well as increase energy efficiency.

1. Broken Glass

If the glass in your window is broken it could cause a large deal of damage to your home, which can make it extremely dangerous and possibly fatal. It is crucial to take the time to ensure that you're doing all you can to ensure that your windows are in good condition.

For single pane windows it can be relatively simple to replace windows, and the new one will usually fit inside the old frame very easily. If you have double-paned windows which are joined by internal beading, it is harder to remove and replace the panes that were previously in use. In this case you'll need to find some plastic spacers that will aid the new pane in being able to fit perfectly into the window frame.

If you're planning to try to remove the window repairs near me panes yourself it is important to wear appropriate safety gear that includes gloves with a thick layer of material and eye protection. You should also lay down a dropcloth prior to you begin working on the window panes to ensure that any shards fall onto the fabric, not onto the floor, where they could be trampled.

Once the glass has been removed, it's a good idea to cover the gap with packaging tape or duct tape to block drafts and water from entering the home until a professional can come out and repair the window. It also acts as a barrier, deterring any intruders to gain access to your home. If the gap is particularly large, you might want to consider using the security door with an integrated window, as this will offer the best of both worlds.

2. Sagging

uPVC is durable energy-efficient, cost-effective and economical alternative to timber sash window. Over time, they can develop a number of problems, including sagging. A sagging uPVC windows can cause problems with light, draughts, and even security. It's crucial to act immediately if you discover that your upvc window repair near me windows are sliding.

Repositioning the hinges could help fix a window that is sliding. First, you'll need to unblock the windows to access the frame. Then, you can remove the hinges at the top and bottom with a screwdriver and adjust them counter-clockwise or clockwise. Once you've adjusted the hinges, close your window and verify the fit. If you're satisfied with the fit, you can tighten the screws to ensure that they remain in place.

If you can't reposition the hinges you may require replacing the seal. Over time rubber seals can lose their elasticity and become dry which causes them to lose tightness. If this happens, it's crucial to replace the seal as fast as possible to ensure your uPVC windows are waterproof and secure from draughts.

uPVC handles may also become loose. This is usually due to screws that have been removed over time, but it can also be caused by the handle mechanism getting worn out. Fortunately, it's easy to fix the loose uPVC window handle yourself. First, you'll need to close your window and do an experiment fit. The corners of the sash need to align with the casing joint. If it doesn't then you can use a screwdriver to loosen the handle and return the mechanism to its original position.

3. Water Leaks

If you're waking up to wet floors and mouldy walls each time it rains it's crucial to take action. Water leaks through windows can cause structural damage to your home and also hinder your ability to control the temperature of your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

This is a fairly simple fix that can be completed by any competent DIYer. Depending on the severity of the issue is, old caulking might need to be removed. It is important to keep in mind that when it is about uPVC window repairs you should avoid the temptation to "over-caulk' as this will only make the area more difficult to clean and can reduce the efficiency of your energy.

It is important to check that the drainage holes are clear of debris and that the sill pan is angled correctly so that it drains away from the window. In more extreme situations, you may have to replace the window.

Other indicators of water leakage are sills that are rotten and the appearance of black spots of mold on the wall near the window. This mold thrives in damp environments and can quickly spread throughout the home.

If the leakage occurs between the double-glazed glass, it is more likely the issue is more with the seal rather than the frame. This can be easily repaired by a uPVC Window Repair specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason when your uPVC window is difficult to open or if it blows open with the breeze. Any competent DIYer can replace hinges in just a few minutes.

Most households in the UK will have either top hung or side-hung uPVC windows that are hinged and, just like any mechanical component they are susceptible to wear and tear over time. It is very easy to replace a hinge on a window, but it's simpler if you have someone to help you hold the frame.

It is also important to ensure that the uPVC hinges are opened and closed in the right direction. This can be done by looking for the arrow on each hinge. This indicates which way the window should open.

The issue can be caused either by opening the window improperly or a faulty installation in the factory. Sending us a picture via our website is often enough to resolve the problem. We are happy to offer assistance.

Regularly lubricating the hinges is also necessary. This can be accomplished by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also prevent corrosion and reduce the possibility of sticking. This should be done at least every year. WD40 and other solvent-based fluids are not recommended since they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by several different factors. The hinges may also become misaligned due to wear, causing gaps where the sash meets frame. If they are beyond repair, it might be required to realign them. In addition, the interlock could also become disaligned. It is located on the hinge's side and could require to be cleaned. In some instances it might be necessary to replace the hinges.

These seals can wear down or get damaged over time, allowing air escape. This can be prevented by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity glass. This will help regulate indoor temperatures and lessen the risk of draughts.

The last way to reduce drafts effectively is to use a draught-excluder. These are usually fabric tubes filled with a filler that can be placed over your window sill. They can help block out cold air and keep your home warm and cosy!

With a little maintenance and repair windows made of upvc will provide a great level of security and insulation for your home. It is crucial to recognise that all windows have a life span and there may come the point when it's more economical to replace them than fix them. If you are having issues with your upvc windows, it is best to seek professional assistance as soon as you can.