Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are easy to maintain and durable, as well as long-lasting. They do not decay or rust as aluminum or timber.

Cleaning and lubricating regularly upvc window repairs windows and doors is crucial. This will help prevent unnecessary repair costs and also increase energy efficiency.

1. Broken Glass

If the glass in your window is broken it can cause a great deal of damage to your home, which can make it very hazardous and possibly fatal. It is essential to take the time to ensure that you're doing all you can to keep your windows in good shape.

For single pane windows, it is fairly easy to replace them, and the new window will generally fit within the old frame very easily. However If windows with double panes are anchored by internal beading it will be more difficult to get rid of the old panes and put in new ones. In this instance, you will need to source some plastic spacers to help the new pane to fit perfectly into the window frame.

If you're planning attempt to remove the glass panes yourself, it is essential to wear the appropriate safety equipment that includes gloves with a thick layer of material and eye protection. You should also lay down a dropcloth prior to you begin working on the window panes to ensure that any shards fall onto the fabric and not onto the floor and Upvc window Repairs could be trampled under.

After the glass has been removed from the window, it's best to seal the gap with some clear packaging tape or duct tape to block drafts and water from entering the property until a professional can come out and fix the window. This also serves as an obstruction to prevent intruders from getting into your home. If the gap is large, you may think about an alarm door that comes with an integrated window as it offers the best of both worlds.

2. Sagging

uPVC is a durable, energy-efficient and affordable alternative to timber sash window. However, over time, they may be afflicted by a variety of issues like sliding. A window repairs that is sagging can cause problems with light, draughts and even security. If you find that your uPVC window is beginning to shrink, it is important to act swiftly to stop the issue from getting worse.

To repair a window that is sagging, you can try repositioning the hinges. You'll first need to open the windows to access the frame. You can then unscrew both the hinges at the top and bottom using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. After you've repositioned the hinges, close the window and verify the fitting. If you're satisfied with the size of the window, you can tighten screws to hold them in the right position.

If you cannot reposition the hinges, you could need to replace the seal. Seals made of rubber can dry out and lose their elasticity over time, leading them to lose their tightness. It is important to replace your seal as soon as you can in order to keep your uPVC window waterproof and draughtproof.

uPVC handles can also become loose. This is typically caused by screws that have been removed over time, but it can also be due to the mechanism of the handle wears out. Luckily, it's not difficult to repair a loose uPVC window handle yourself. The first step is to close the window and perform an experiment to ensure that it fits. The joint at the corners of the sash should be aligned with the joint on the casing. If it isn't then you can use a screwdriver to loosen the handle, and then return the mechanism to its original its original position.

3. Water Leaks

If you wake up to wet floors and damp walls each time it rains it's important to take action. Water leaks through windows can cause structural damage to your home and also hinder your ability to control the temperature inside your home. The most common cause for leaking uPVC windows is that the sealant around the frame has been damaged or is missing.

This is a fairly simple fix that can be done by any DIY expert. Based on the severity of the problem the caulking used previously may require removal before a new layer of caulk is applied. It is crucial to remember that when it comes to uPVC window repairs, do not be tempted to 'over-caulk in order to make the area more difficult to clean and reduce your energy efficiency.

Verify that the drainage holes are free of debris in them, and also that the sill pan is properly angled to allow the water to drain from the window. In more severe situations, you may have to replace the window.

Other indicators of water leakage are decayed sills and the appearance of black spots of mold on the wall near the window. This is a fungus that thrives in damp conditions and can quickly spread across the home.

If the leakage occurs between the double-glazed window, it is more likely the problem is related to the seal, not the frame. A uPVC specialist can easily fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or loose and open with ease It could be hinges at fault. They can be easily replaced by any competent DIYer and can usually be completed in a matter of minutes.

Like all mechanical parts hinges are prone to be damaged over time. It is essentially a simple procedure, but it is easier with someone else to help you hold the frame up.

Verify that the uPVC hinges open and close in the proper direction. You can check this by checking for the arrows on each hinge. This shows which way the window should open.

The problem can be caused by opening the window improperly or by a poor installation in the factory. This issue can be fixed by sending us a photo through our website and we will be happy to give you suggestions.

Regular lubrication of hinges is also essential. Applying a light engineering lubricant on the hinges is an ideal way to do this. We recommend using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can help the window open and close more easily. It can also stop corrosion and decrease the chance of sticking. This must be done at a minimum once a year. WD40 or other solvent-based oils are not recommended as they could damage your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by various factors. The hinges, also due to wear and tear could become misaligned. This will cause an opening to appear between the sash and the frame. If they're beyond repair, it may be necessary to have them realigned. The interlock may be misaligned. This is located on the hinge's side and might require to be cleaned. In some cases it might be necessary to replace them.

The next common reason for draughts are the window seals, these are susceptible to being worn out or damaged over time, and allow air to escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with low-emissivity glass, this will help to regulate indoor temperatures, and also reduce the possibility of draughts.

Lastly, one of the most effective methods to reduce draughts is by using a draught excluder, these are typically fabric tubes that are filled with some type of filler. They can be put on the windowsill on top. These will keep your home warm by blocking out cold air.

Your windows made of upvc will continue to provide excellent insulation and security in your home with regular maintenance and repairs. It is crucial to keep in mind that all windows eventually wear out and it may be more cost-effective to simply replace them than to repair them. So, if you're experiencing problems with your upvc windows, it is always recommended to seek help from a professional immediately.