Repairs to uPVC Windows

uPVC is a great option for modern homes. They are easy to maintain and durable, as well as long-lasting. They are not susceptible to decay or rust as timber and aluminum.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will help prevent unnecessary repair costs and also increase energy efficiency.

1. Broken Glass

If the glass in your window is broken it can cause a great deal of damage to your home, which can make it very hazardous and possibly fatal. It is essential to ensure that your windows are in good shape.

Single-pane windows are fairly simple to replace, and they will usually fit into the frames that were previously in use very easily. If you have double glazed window repairs near me-paned windows which are held together by internal beading, it will be more difficult to remove and replace the old panes. In this case it is essential to purchase plastic spacers to aid in fitting the new pane into the window frame.

If you are going attempt to remove the window panes yourself, it is essential to wear appropriate safety gear, including thick gloves and eye protection. It is also recommended to lay down a drop cloth before you begin working on the window panes so that any shards of glass fall onto the fabric and not on the floor which could cause them to be trampled.

Once the glass is removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to stop water and drafts from entering the home until a professional can come out and repair the window. This will also act as a barrier, preventing any intruders from getting access to your home. If the gap between the window and the door is significant, you may need to consider security screens that has an opening. This will provide the best of both.

2. Sagging

uPVC is durable, energy-efficient and affordable alternative to timber sash windows. However, over time, they are susceptible to a range of issues like sagging. A window that isn't properly aligned can cause problems with light, draughts or even security. It is crucial to act as soon as you realize that your uPVC windows are sagging.

To fix a window that is sagging you can try repositioning the hinges. To do this, you'll need open the window to access the frame. Then, you can remove the hinges at the top and bottom using a screwdriver and adjust them clockwise or counter-clockwise. Once you've repositioned the hinges, shut your window and verify the fit. If you're satisfied with the fit, you can tighten the screws to ensure they stay in the right place.

If you are unable to move the hinges, you might have to replace the seal. Seals made of rubber can dry out and lose their elasticity with time, causing them to loosen. If this happens, it's crucial to replace the seal as quickly as possible so that your uPVC windows remain watertight and draught-proof.

UPVC handles can also loosen. The majority of the time, this is caused by screws that have come loose over time. However, it could occur because the handle mechanism has worn out. It's a good thing that it's simple to repair the handle of a window that is loose yourself. The first step is to close the window and perform an initial test to ensure that it fits. The joints at the corners of the sash should align with the joint on the casing. If it does not then you can use the screwdriver to loosen the handle. Then, turn the mechanism into position.

3. Water Leaks

It is important to act if you awake each day to find mouldy walls and floors that are wet. Windows that leak water do can not only cause destruction of your home's structure but also hinder your efforts to control the temperature within your home. The most frequent reason for leaking uPVC windows is that the sealant surrounding the frame has been damaged or not present.

This is a simple fix that can be accomplished by anyone who is a DIYer with the skills. Depending on how severe the issue is, the old caulking may have to be removed. It is crucial to keep in mind that when it comes to uPVC window repairs you should not be tempted to apply too much caulk and then make the area more difficult to clean and can reduce the efficiency of your energy.

It is essential to ensure that the drainage holes are clear of debris and that the sill pan is angled properly so that it drains away from the window. In more extreme instances, you may need to replace the window.

Other signs of long-term water leakage include rotted sills and the appearance of black spots of mold on the wall near the window. This is a fungus that thrives in damp conditions and can quickly spread throughout the house.

If the leakage occurs between the double glazed window repairs near me-glazed glass, it is more likely that the issue is with the seal than the frame. It is also possible to be repaired by a uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault if your uPVC window is difficult to open or if it blows open with the breeze. Anyone with the skills to fix them can replace hinges in just a few minutes.

Like all mechanical parts hinges are prone to be damaged over time. It's very simple to change the hinges on a window but it's much easier if someone helps hold the frame.

It is also important to ensure that the uPVC hinges are being opened and closed in the right direction. You can do this by looking for the arrow on each hinge. This shows which way the window should open.

The problem can be caused due to opening the window in the wrong way or due to a poor installation at the factory. This can often be resolved by sending us a picture through our website and we will be more than happy to give you suggestions.

Regular lubrication of hinges is also essential. Applying an engineering lubricant that is light to the hinges is a great way to do this. We suggest using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It also decreases the risk of a window getting stuck and stop corrosion. This must be done at a minimum every year. WD40 and other solvent-based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by different things. The hinges, also due to wear and tear can become misaligned, this causes an opening to appear between the sash and the frame. If they are beyond repair, it could be required to realign them. The second is the interlock, which is located on the hinge side of the window, can also become misaligned, again it's possible to just give them a good clean, but in some cases it might be necessary to have them replaced.

The next most common reason for draughts are the window seals. These are susceptible to being worn out or damaged over time, and will allow air to escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Another option is to replace the window with low-emissivity glass. this will help to regulate indoor temperatures, and also lessen draughts.

Another method of reducing drafts effectively is to use a draught-excluder. These are usually made of fabric tubes filled with a filler, which can be hung over your window sill. These will help to stop cold air from entering and keep your home warm and cozy!

With a little regular maintenance and repairs, your upvc windows will provide excellent insulation and security for your home. However, it is important to recognize that all windows have a lifespan and eventually, they will reach a point where it is more efficient to replace them than fix them. If you are experiencing issues with your Upvc window, it's best to consult a professional immediately.